BERNARD BERNARDINO DAGGAO DARBIN

Duties and Responsibilities:

• Coordination, supervision and management of engineering & design activities of the owners engineer, project engineers, site engineers and other stakeholders.
• Review/verify and approve methodologies for project control, cost control, project monitoring, inspection, design & design changes, field change notification and project reporting.
• Development, review and approval of protocols for all project documents i.e. drawings, technical specifications, design changes, field changes notification, standards and correspondences.
• Take lead in resolving issues, develop solutions with owner’s engineer, equipment vendors and other stakeholders.
• Review/verify and approve procedures for design changes, field change notification, inspection, factory acceptance testing, site acceptance test, precommissioning & commissioning, project hand-over and close-out (termination).
• Monitor and report plant design and project implementation activities vis-à-vis develop timeline and schedule.
• Oversee, direct and coordinate activities of all engineers to achieve a common goal for a successful project implementation.
• Provide/recommend technical resolution on field design problems and technical issues that may arise during actual project execution, in conjunction with owner’s engineers.
• Conduct quality control assessment, site inspection and acceptance of partially completed works in accordance with the design requirements and construction standards.
• Undertake review/verification and approval for the adequacy, stability and safety of all site operations and methods of construction
• Ensure that appropriate safety, health and environment practices are implemented and observed throughout the company to meet statutory and corporate standards

Projects:
• LPG/Aromatics and Polymer Truck Parking (November 2021 to Present) • Concept Design Study for Combine Cycle Gas Turbine (CCGT) Power Plant (November 2021 to Present)
• Substation Electrical Upgrade for the Solar Panel @ FGW-1 & FGW-2 (February 2022 to Present

Duties and Responsibilities:

• Working as an Electrical Engineer responsible for defining the required project deliverables at the Proposal Stage and development of design deliverables upon award of the work. • Performs engineering calculations using ETAP software for load flow, short circuit, motor starting and relay setting & coordination studies.

Projects: Working on various ongoing Petro Rabigh GES WERs and Ma’aden Phosphate Company (MPC) projects.
• Sulfuric Acid Unloading Facility (MOC-PR-M01-R250-2018-690 #1001362)
• Naptha Reformer EWR To Provide Hopper and Lifting Facility for CCR Catalyst make up
• Lube Oil And Spent Catalyst Shelter - R410
• Installation Of Rock Phosphate Dust Suppression, Control and Prevention System

Duties and Responsibilities:
* Understanding Saudi Aramco standards & procedures.
*Perform engineering calculations using ETAP software for load flow, short circuit, motor starting and relay setting & coordination studies.
* Prepares Electrical design calculations such as cable sizing, conduit and cable tray
sizing, sizing of electrical equipment like Power and Dry-type transformers, MCC
and Switchgears, UPS, Battery Chargers, Panelboard schedule, develops
Elementary and Schematic Diagram, Interconnection Diagram, Protection and One
Line Diagram, etc..
* Responsible in designing, preparing and reviewing of layouts for lighting and
power, substation electrical equipment, cable tray, trenches, duct banks, grounding
system, etc.
* Coordinates all design/technical issues to superiors and other disciplines to comply
project standards.
* Conducts site survey to gather relevant information on the existing plants and
prepares site survey report.
* Prepares Material Take-Off and review Vendor drawings.

Saudi Aramco Projects:
 Fadhili Industrial Support Facilities (Detailed Design) (June 2016 to December 2016)
 Install New Scrubber at Hydrocracker Plant Ras Tanura (Detailed Design) (April 2016 to July 2016)
 Ras Tanura Clean Fuel (Detailed Design)
(June 2015 to December 2016)
 South Dhahran Home Ownership Development (Detailed Design)
(January 2015 to November 2016)
 South Dhahran Home Ownership Development (FEED)
(June 2013 to December 2014)
 Dora Gas Facilities @ Khursaniya Gas Plant (FEED)
(February 2013 to June 2013)
 Al-Hasa Health Center Revitalization (Detailed Design)
(June 2012 to June 2013)
 Build New Fire Training Tower & Burning Building
@ Safaniyah Fire Training Ground
(June 2012 to December 2012)

Duties and Responsibilities:
* Responsible in designing and preparing of layouts for lighting and power, electrical
heat tracing, substation electrical equipment, cable tray, trenches, duct banks,
grounding system, etc.
* Performs 3D modeling of cable trays, conduits, lightings, ductbanks, and trenches
using EEraceway(PDS) software.
* Coordinates all design/technical issues to superiors and other disciplines to comply
project standards.
* Prepares Material Take-Off and review Vendor drawings.
Projects:
* Saudi Arabian Mining Company (Ma’aden) Aluminum Project Mine and Refinery
(Detailed Design) - Saudi Arabia

Duties and Responsibilities:
* Understanding Saudi Aramco standards & procedures.
* Orientation on Proposal / Detail Design project implementation procedures.
* Prepares Electrical design calculations such as cable sizing, conduit and cable tray
sizing, sizing of electrical equipment like Power and Dry-type transformers, MCC
and Switchgears, UPS, Battery Chargers, panelboard schedules, develops
Elementary and Schematic Diagram, Interconnection Diagram, Protection and One
Line Diagram, etc..
* Responsible in designing, preparing and reviewing of layouts for lighting and
power, substation electrical equipment, cable tray, trenches, duct banks, grounding
system, etc.
* Coordinates all design/technical issues to superiors and other disciplines to comply
project standards.
*Conducts site survey and gather relevant information on the existing plants and prepares site survey report.
*Prepares Material Take-Off and review Vendor drawings.

Saudi Aramco Projects:
 Nuayyim ASL Crude Increment Facilities Hawtah Stabilizer Upgrade (Detailed Design)
(September 2008 to March 2009)
 Replaced On-Line Analyzers at Berri Gas Plant (Project Proposal)
(March 2009 to June 2009)
 E & I Installation with Fencing of Well Heads at Haradh-515, Hawiyah-562 and Uthmaniyah-1692 (Detailed Design)
(May 2009 to August 2009)
 Replace UPS System @ East/West Pipeline Pumpstation # 4, 9 & 10. (Detailed Design)
(Aug 2009 to January 2010)
 Replace Electrical Equipment at Gas Oil Separation Plant (GOSP) # 5 & 7 (Detailed Design)
(Aug 2009 to March 2010)
 Replaced On-Line Analyzers at Berri Gas Plant (Detailed Design)
(October 2010 to June 2011)
 Jubail Export Refinery Package 5C (Detailed Design)
(August 2009 to August 2011)

Duties and Responsibilities:
 Responsible in designing and preparing layouts for lighting and power, cable sizing, cable tray, trenches, duct banks and grounding system.
 Performs 3D modeling of cable trays, conduits, lightings, ductbanks, and trenches using EEraceway(PDS) software.
 Coordinates all design/technical issues to superiors and other disciplines.
 Ensures that Work Instructions (WI) is being implemented.
Prepares Material Take-Off and review Vendor drawings.
Projects:
 Sulfur Recovery Unit (SRU) - Degassing Facilities - Shell Singapore (September 2007 to November 2007)
 Saudi Kayan Petrochemical Complex (Detailed Design) - Jubail, Saudi Arabia (November 2007 to September 2008)

Duties and Responsibilities:
 Performs lighting and power calculation, cable sizing, cable trays and conduit sizing.
 Prepares Schedule of Loads, One-line, Schematic, Riser and Connection Diagrams to be able to develop plan and layout drawings based on plan specification.
 Review shop and detailed drawings/plans if it complies with the latest standards of Philippine Electrical Code (PEC) and National Electrical Code (NEC).
 Prepares Material Take-Off.
Projects:
 Monterrazas de Cebu
 Ayala Musuem
 The Lancaster Suite

Duties and Responsibilities:
* Assigned at Front of Line (FOL), responsible on troubleshooting and repairs of
Assembly equipment like Wire Bond Machine (KNS Maxum Plus, 8028, 8020) to
support manufacturing delivery builds. Knowledgeable also in ASA Mold Machine
and Pre-Mold Plasma (EOL equipment).

Duties and Responsibilities:
* Responsible on monitoring of running machines and equipment inside/outside the
production area such as generators, motor pumps, chillers and compressors.
* Responsible on troubleshooting of electrical machines/equipment such as Len’s
cleaning machines, SPC machines, Lens cure oven, MCE machines, robotics,
conveyors, watervats, etc. in case machine breakdown.
* Wiring Installation of motor control, lighting fixtures, power outlet, telephone and
LAN.

Analysis of the basis and determine the affected period of the billing of the
customer with Service Irregularities and meter abnormalities/deficiencies
particularly Residential and General Services (RGS).
* Determines the nature of meter tampering (jumper, outside connection, tampered
meter, etc.).
* Computes connected loads of residential and general services, small industrial and
non-industrial, flat street lighting, government hospitals and metered street lighting
services.

Duties and Responsibilities:
* In charged/supervised operation and maintenance of electrical equipment such as
motors, pumps, compressors, chillers, boiler, and generator.
* Troubleshooting of electric motors and its control used in overhead cranes, pumps,
burner motor, fans and blowers.
* Bends, assembles, install conduit pipes, inserting, splicing and connecting wires to
lighting fixtures, receptacle outlets to the power source and wiring installation of
motor and its control.
* Repairs/reconditions used electrical devices used in motor controls such as
magnetic contactor, circuit breakers, relays, start/stop push buttons, programmable
logic controllers (PLC), limit switches, timers and solenoid valves.