Dennis Tolentino, Safety Supervisor & Scaffold Supervisor 1

Dennis Tolentino

Safety Supervisor & Scaffold Supervisor 1

Arkad Engineering & Construction Company for Saudi Aramco Pipeline Project (SA)

Location
Philippines
Education
Bachelor's degree, Bachelor of Science in Electrical Engineering
Experience
16 years, 6 Months

Share My Profile

Block User


Work Experience

Total years of experience :16 years, 6 Months

Safety Supervisor & Scaffold Supervisor 1 at Arkad Engineering & Construction Company for Saudi Aramco Pipeline Project (SA)
  • Saudi Arabia
  • May 2014 to June 2018

Responsible for overseeing safety of all trades and effectively supervising daily on site activities. Responsible for directing the site construction and sub-contractors in planning, coordinating and safely executing the work in accordance with the contract documents, schedule and budget. Report directly to the Safety Superintendent and fulfill an integral safety role in the project. Shall be also visibly demonstrates the priority of safety in all activities, including setting a good personal example.


 Provide Induction Training to new employees.
 Arrange schedule for Saudi Aramco Plant Safety Orientation to all employees and update its status on a weekly basis.
 Provide and update safety training plan completion on a weekly basis.
 Provide HSE related documents for review and approval of top management and clients.
 Coordinate and update the Work Permit Report
 Ensure that safety training and all other specifically required training is provided for all employees.
 Coordinate any investigations for employee inquiries, suggestions and complaints.
 Establish and monitor a program for reporting and investigating “near-miss” situations.
 Maintain and keep required safety and health documents/files.
 Coordinate with the Project planner and provide weekly and monthly statistical report to SAPMT
 Be empowered in writing by his management to stop their own work and work related to the contract that they deem to be unsafe and take immediate corrective actions as needed.
 Understand safety and health requirements of the contract — in particular Schedule ―D and this document — as well as the CSSP, HIP and CSM.
 Ensure all contractor and subcontractor personnel attend site safety orientations, including as required by the SAPO, and ensure contractor and subcontractor personnel attend applicable safety training.
 Communicate safety rules and standards to the contractor and subcontractor workforce.
 Provide/assist with safety training for personnel.
 Provides promotional materials and develops and administers recognition systems to promote safe and healthful work performance.
 Periodically inspect the work site, report any unsafe acts/conditions to the area supervisor and/or foreman, provide recommendations to correct deficiencies and follow-up to verify corrective actions have been taken.
 Assists management in the annual inspection of workplaces to assure safe and healthful conditions for workers. Prepares appropriate notices for management to issue for abatement of any identified hazards.
 Keep a record of safety meetings, including agendas and personnel attendance records. Keep a permanent record of job-related injuries/illnesses, near misses, fires, motor vehicle accidents, property damage, crane and heavy equipment incidents, etc.
 Participate in incident investigations, safety meetings, drills, etc., and conduct/facilitate safety training sessions.
 Prepares daily, weekly and monthly site safety reports.
 Ensure general safety rules are printed in languages understood by contractor and subcontractor personnel and are posted in areas where they are clearly visible.
 Immediate supervisor of scaffold craftsmen during erecting, altering, or dismantling scaffolds in the area for which responsible, and has the authority, training, and experience necessary to competently direct scaffolding work and verify compliance with applicable standards.

Safety Supervisor at Metal Services for Trading and Contracting for Saudi Aramco Pipeline Project (SA), Dhahran, KSA
  • Saudi Arabia - Khobar
  • May 2012 to May 2014

Responsible for maintaining and protecting both employee and health and safety, protecting the safety of workers around equipment and may work alongside employees or may be solely responsible for safety-monitoring efforts such as:

 Supervises safety systems of the company through internal audit report, trainings of employees.
 Conducts safety meetings, safety audit, safety performance monitoring, documents review and revision.
 Responds to clients complaints, and prepares weekly and monthly safety reports.
 Implements, monitors, and reports company compliance to Saudi Aramco, Occupational Safety and Health Administration (OSHA), and International Safety Standards.
 Lead the company to prevent loss and injuries to any employees.

Quality & Safety Supervisor at Tania Water Factory Riyadh, KSA
  • Saudi Arabia
  • February 2010 to January 2012

Managing and providing oversight of the safety program safety and quality programs, and performs the following functions:

 Supervises quality and safety systems of the company through internal audit and trainings of employees.
 Conducts safety and quality meetings, incoming materials quality audit, quality and safety performance monitoring, documents review and revision.
 Responds to customer complaints by why-why analysis, fishbone diagram and CAPA report.
 Prepares weekly and monthly quality and safety reports.

Quality and Safety Dept. Head at Peerless Integrated Services, Inc. Procter and Gamble Philippines, Inc. Project
  • Philippines
  • February 2005 to February 2010

Managing and providing oversight of the safety program safety and quality programs, and performs the following functions:

 Provides appropriate quality, safety and health, quality issues and accident prevention, and investigation training for supervisors and employees.
 Assists management in the annual inspection of workplaces to assure quality, safe and healthful conditions for workers. Prepares appropriate notices for management to issue for abatement of any identified hazards.
 Provides promotional materials and develops and administers recognition systems to promote safe and healthful work performance.
 Assists management and supervisors in investigating accidents and developing measures to prevent recurrences.
 Supports the Safety Management Information System (SMIS) by recording all accident reports in a timely, complete, and accurate manner.
 Assures that claims for injuries and illnesses are posted and reported..
 Conducts quality and safety meetings, incoming materials quality audit, quality and safety performance monitoring, documents review and revision.
 Responds to customer complaints.
 Prepares weekly and monthly quality and safety reports.
 Implements, monitors, and reports company compliance to Basic Occupational Safety and Health (BOSH) Standards.

 Process Engineer at Shinyup Electronics of Phils, Inc. (Printed Circuit Board Manufacturing Firm)
  • Philippines
  • November 2003 to February 2004

Responsible for providing immediate technical support to production for its smooth and continues operation through line monitoring, evaluation and debug to produce quality board covering multiple areas of responsibilities.

 Conducts line audit to check production compliance to set standards by the company.
 Conducts debug/evaluation of new products, machines, processes.
 Initiates corrective and preventive actions whenever there is process related problems that arises in the production operation.
 Monitors and computes production statistical process control data on critical parameters used in the production line.
 Prepares reports for newly debug/evaluated products, machines, processes.
 Initiates and recommends improvement and cost effectiveness in the production processes.
 Conducts/attends quality meetings whenever there are new products, machines, processes or cost effectiveness evaluation to be introduced in the production line.
 Provides corrective and preventive action plan reports for any issues/customer complaints in the production related matters through why-why analysis, fishbone diagram, and CAPA reports.

 Process Engineer at Synertronix Inc. (Printed Circuit Board Manufacturing Firm)
  • Philippines
  • September 2000 to August 2003

Responsible for providing immediate technical support to production for its smooth and continues operation through line monitoring, evaluation and debug to produce quality board covering multiple areas of responsibilities.
 Conducts line audit to check production compliance to set standards by the company.
 Conducts debug/evaluation of new products, machines, processes.
 Initiates corrective and preventive actions whenever there is process related problems that arises in the production operation.
 Monitors and computes production statistical process control data on critical parameters used in the production line.
 Prepares reports for newly debug/evaluated products, machines, processes.
 Initiates and recommends improvement and cost effectiveness in the production processes.
 Conducts/attends quality meetings whenever there are new products, machines, processes or cost effectiveness evaluation to be introduced in the production line.
 Provides corrective and preventive action plan reports for any issues/customer complaints in the production related matters through why-why analysis, fishbone diagram, and CAPA reports.

Education

Bachelor's degree, Bachelor of Science in Electrical Engineering
  • at Southern Luzon Polytechnic College
  • April 2000

Belongs to the top 20 students in college. Barangay scholar in college.

Specialties & Skills

Process Safety
Work Environment
Group Health
System Safety
Quality Systems
Safety and Health Officer
Computer in Microsoft Word, Ecel, and Power Point
Quality Assurance Supervisor
Production Supervisor
Process Engineering

Languages

English
Intermediate
Filipino
Expert

Memberships

Procter and Gamble Phils. Inc. QA Owners
  • Quality Assurance Owners
  • October 2008
Associate Member of Safety Officers
  • Safety Officer
  • July 2009

Training and Certifications

AUTHORIZED GAS TESTER COURSE (Training)
Training Institute:
Offshore Onshore Oil & Gas Training Center and Career Dev’t. East Ortigas Mansions, Pasig City, Phi
Date Attended:
February 2012
Duration:
8 hours
GAS TESTING WITH M40 MULTI GAS MONITOR COURSE (Training)
Training Institute:
Arabian Safety Training Centre (ASTC), Dhahran, KSA
Date Attended:
June 2012
Duration:
8 hours
FIRST AIDER COURSE (Training)
Training Institute:
Aston Hospital, Dammam, KSA
Date Attended:
November 2012
Duration:
8 hours
FIRST AIDER COURSE (Training)
Training Institute:
Aston Hospital, Dammam, KSA
Date Attended:
November 2012
Duration:
8 hours
SAUDI ARAMCO WORK PERMIT RECEIVER COURSE (Certificate)
Date Attended:
September 2013
Valid Until:
September 2015
SAUDI ARAMCO WORK PERMIT RECEIVER COURSE (Certificate)
Date Attended:
November 2015
Valid Until:
November 2017
SAUDI ARAMCO WORK PERMIT RECEIVER COURSE (Certificate)
Date Attended:
March 2018
Valid Until:
March 2020
BASIC FIRE FIGHTING COURSE (Training)
Training Institute:
Tamkene, Dammam, KSA
Date Attended:
December 2014
Duration:
8 hours
BASIC FIRE FIGHTING COURSE (Training)
Training Institute:
Tamkene, Dammam, KSA
Date Attended:
December 2014
Duration:
8 hours
BASIC FIRST AID & CPR (Training)
Training Institute:
Arabian Safety Training Centre (ASTC) Dammam, KSA
Date Attended:
August 2016
Duration:
8 hours
IRCA ACCREDITED ISO 9001-2008 LEAD AUDITOR TRAINING COURSE (LEAD ASSESORS COURSE) (40 hrs.) based on (Training)
Training Institute:
Global Competitiveness Consulting Ltd. In cooperation with CMC International (UK) Ltd.
Date Attended:
August 2009
Duration:
40 hours
BASIC OCCUPATIONAL SAFETY AND HEALTH COURSE (BOSH) (Training)
Training Institute:
Labspeak
Date Attended:
May 2008
Duration:
40 hours
IRCA ACCREDITED ISO 9001-2008 LEAD AUDITOR TRAINING COURSE (LEAD ASSESORS COURSE) (40 hrs.) based on (Training)
Training Institute:
Global Competitiveness Consulting Ltd. In cooperation with CMC International (UK) Ltd.
Date Attended:
August 2009
IRCA ACCREDITED ISO 9001-2008 LEAD AUDITOR TRAINING COURSE (LEAD ASSESORS COURSE) (40 hrs.) based on (Training)
Training Institute:
Global Competitiveness Consulting Ltd. In cooperation with CMC International (UK) Ltd.
Date Attended:
August 2009
OCCUPATIONAL SAFETY AND HEALTH PROFESSIONAL CERTIFICATE PROGRAM (Training)
Training Institute:
OSHAcademy Occupational Safety and Health Training Geigle Safety Group Inc. 515 NW Saltzman Road #91
Date Attended:
October 2011
Duration:
132 hours
INTERNATIONAL OIL AND GAS HSE CERTIFICATE (Training)
Training Institute:
Offshore Onshore Oil & Gas Training Center and Career Dev’t. East Ortigas Mansions, Pasig City, Phi
Date Attended:
February 2012
Duration:
40 hours
CERTIFIED SAUDI ARAMCO SCAFFOLD SUPERVISOR 1 (Certificate)
Date Attended:
May 2015
Valid Until:
May 2018