DIXIT MADHANI

Handled:
• Arlanxeo FEL3 Project
◦ Syncrude Project
◦ BP Portfolio
◦ RCUB Project
• PLPG Project
◦ AGIG Project
◦ Lubrizol project
◦ RSHT 2 Project
• -
• Scheduling Work
◦ Developing L3 Schedule & S-curve based on Scope, Engineering Index & Deliverable List.
◦ Supporting Proposal Schedule for Domestic Projects.
◦ Conducting IAP With Engineering Leads for Finalize Timeline of Schedule.
◦ Rebase line of Schedule if Scope Change in Project.
◦ Preparation of Proposal Schedule for upcoming projects.
• Progress Monitoring Work
◦ Tacking Engineering Progress from JPI/ Aconex Software/Document Control Index (DCI) & updating
progress on weekly/monthly basis.
◦ Preparation & Updation of S Curve from progress measurement sheet.
◦ Preparation and Updation of Manhour Report.
◦ Co-ordination with engineering leads reg variance analysis b/w plan and actual & update Progress &
forecast.
• Cost Controlling & Monitoring
◦ Preparation of PCS, FCS and Margin Analysis.
◦ Calculate Productivity of Project & involving in cost analysis.
◦ Maintaining Change Register.
◦ Maintaining PAAF Register and Providing Time Sheet Access to New Employee in Worley System.
◦ Monitoring Overall Budget & Cost for Project against of actual booking and Billing Rate.
◦ Monitoring in Overtime analysis in Project.

Working on Chemical Projects

• Involving in CAPEX preparation for upcoming projects & techno commercial activity.
• Develop and implement project control procedures and systems for upcoming Projects.
• Reviews FEED packages & decomposing the projects into packages / WBS / Milestones.
• Co-coordinating kick-off meeting with vendors for ordering for Ordering of Long Lead Items.
• Involve in sub-contracting activities for Civil, Structure & E&I related activities.
• Preparation of engineering & procurement delivery schedule for new projects & develop overall baseline
schedule with respect of drawings & material delivery in projects.
• Coordinate with Engg., Procurement and Construction Department to meet the schedule within budget.
• Interfacing with Engg, team for timely release MR & technical clearances to expedite procurement.
• Review and perform analysis on project cost and schedule to show impact of progress and scope
changes on previously scheduled target dates.

System for 1200MW Power Plant.
 Project Name: Scope of Project:
 Job Responsibility: -
• Installation of 1000TPH Capacity Conveyor Belt 2* 13 KM length for Coal Handling System for 2*600
MW Capacity Thermal Power Plant.
• Construction & commissioning for Stacker Reclaimer system.
• Responsible for commissioning & trial for CHP from jetty to power plant.
 Job
• Construction & commissioning activity for CHP System.
• Trial for CHP system & solving construction & operation-Maintaintence related issues.
• Following Standard Operation & Maintaintence Procedures for all Equipments.

 Client Coordination for PPS quantity certification/ Weekly Construction Meeting with Client.
 Monthly PPS Preparation, Monthly Schedule updates for L3 (Company) & L4 (Internal) & Progress Reports and MIS.
 Line Pipe delivery Coordination with EMAS.
 Construction - S Curve preparation for level 3 and level 4 & Backlog preparation and circulation for Level 3 and Level 4.
 Updating of Technical document Register (TDR), Procurement Tracking Register (PTR) and Construction Measurement Register (CMR)
 Project L3 Schedule Analysis & Progress Monitoring based on L4 Schedule.
 Backlog analysis of Engineering, Procurement & Construction Team.
 Action Register Follow up of construction meetings

Ø Co-ordinate with Engineering & Procurement Team Reg. Drawing & material related issue.
Ø Rescheduling the project based on actual progress of project & compare with base line schedule for calculation of project completion date.
Ø Co-ordinate with existing contractor regarding Interface related issues.
Ø Timely meeting with Clint & PMC regarding progress & issues of project.

worked for EPC Project for Short Team
Contract Period.
 Project Name: Al Jubail, Saudi Arabia.
• Scope of Project: -
• 2 Nos. of 36 FGP Pipeline from
• 1 Nos. of 8 MEG Pipeline from
• 3 Nos (FGP, SVS & BVS) of
• Job Responsibility:
• Coordination with Client for PPS quantity certification, Weekly Review Meeting.
• Monthly preparation of PPS, Schedule, progress reports & invoice.
• Overall - S Curve preparation for level 3 / level 4 schedule.
• Updating of Technical document Register (TDR), Procurement Tracking Register (PTR) and Construction
Measurement Register (CMR).
• Project L3 Schedule Analysis & Progress Monitoring based on L4 Schedule Interfacing of engineering,
procurement, and construction activity.
• Backlog analysis of Engineering, Procurement & Construction Team.
• Preparation & monitoring of planning package, project control deliverables, summarized integrated
project schedule, look head schedule, progress S-curves & functional schedules.
• Preparation for delay analysis in time extension case if required in project.
• Preparation & Submission of Techno-commercial change orders to Client & Coordinate for change order
preparation & compilation.

I worked as a Planning Engineer with Dodsal Engineering & Construction for EPC Project’s of Kuwait Oil Company.

• Project Details:-
NAME:-Effulent Water Treatment & Injection Plant, North Kuwait.

I worked as a Project Planning Engineer for J3 Project - Reliance Industries LTD, Jamnagar, India from 06-May-2014 to 03-Nov-2015.

Project NAME:- J3 Expansion Project of Reliance Industries LTD for new project of DTA-PCG, SEZ-PCG, C2 Complex & PX-4. at Jamnagar, India.

• Job Responsibility:-
 Timely monitoring & updating construction Level 3 & 4 Schedule & monitoring critical path analysis with respect to EPC data, S Curve, Updating various Construction Databases & Monitoring Progress monitoring report for Management review.
 Proper co-ordination with EPC team, Contract Cell & various other Dept.
 Estimate Area Wise total scope, Calculate exact scope as per drawing release, calculate front for work as per material availability & site front.
 Preparation of Weekly, Monthly & Three Months look-ahead Schedule. Updating actual Progress based on scope of work.
 Tracking & maintain scope changes of project & updating scope of overall project.
 Estimation of Manpower Requirement for the Project based on standard productivity norms. Monitoring of actual resources availability & analysis using Histogram.
 Preparing progress % calculation systems, earned man-hours, productivity & Trend analysis.
 Preparation of discipline wise liquidation plan, Productivity Analysis, Resource requirement assessment on weekly/monthly basis to enable management to fill up the gap.
 Preparation Executive Progress Summary Report / Presentations to the Top Management on Project Status for periodical review.
 To interact with PCM & issue project MIS to Client & H.O. on daily; weekly & monthly basis.
 Development of Base Line Schedule (Level 2) using Planning Software Primavera or MS Project.


I worked as Project Planning Engineer for 4*90MW CCPP Power Project, Reliance Industries LTD, Hazira, Surat, India from 04-Nov-2015.

• Project Details:-
NAME:- 4*90MW CCPP Power Project, Reliance Industries LTD, Hazira

• Job Responsibility:-
 Preparing Commissioning based schedule by checking work completion of entire system including operation related PSSR punch Point.
 Preparing System wise completion plan as per Start-up Schedule of Operation Team.
 Working with Cost & Estimating department for integrating cost & schedule by developing/mapping Cost Codes & WBS.
 Timely monitoring & updating construction Level 3 & 4 Schedule & analysis critical path.
 Providing project wide manpower forecasts by trade, discipline and area.
 Developing Area wise work completion plan based on overall project schedule.
 Developing & Monitoring S-Curve for construction Leval 3 schedule.
 Analysing the available resourse for proper utilization in project for completing project as per schedule.
 Co-ordinating Engineering & Procrument related issue with Design & Material team.

• Job Responsibility: -
• Estimation Scope of Project & finalize overall Process Scheme & Layout of Project.
• Co-ordinate with engineering team & client reg. drawing approval of project.
• Coordinate with engineering & procurement team for design & material related issue.
• Timely monitoring & updating construction Level 3 & 4 Schedule & submit to Client.
• Preparing & update Critical Item Register, Monthly Progress Report, Physical Measurement Sheet (PMS),
Interface and Pre-commissioning schedule of project.
• Highlighting balance activities of project as per L4 Schedule to management. Co-ordinate with
Engineering & Procurement team reg. drawing & material related issue.
• Co-ordinate for finalize overall plot plan, scheme & detail layout with engineering team & client.
• Co-ordinate for approval for drawing with client & engineering team.
• Co-ordinate with existing contractor regarding Interface related issues.
• Timely meeting with Clint & PMC regarding progress & issues of project.
• Rescheduling the project based on actual progress of project & compare with base line schedule for calculation
of project completion date.
• Working with Cost estimating department for project cost & analysis for cost control.

I have worked as a Project Engineer for Al Turki Enterprises LLC for PDO, Oman Project.

NAME- Greater Rima Field Development Project - PDO, Oman.

• SCOPE OF PROJECT:-
 23 Nos. MSV with Carioles Meter & Red Eye Water Cut Meter installation.
 New 24” x 28 kms U/G GRE Pipe Line Installation
 New 24” x 9 kms U/G GRE Pipe Line Installation including replacing existing 8” CS Pipe Line.
 New 14”x 14 kms U/G GRE Pipe Line Installation.
 Expansion work for the upcoming 150 wells
 Installation of new MSV’s, CS Bulk Headers, Manifolds, GRE Transfer Pipelines & other Project Related Actives.

• Job Responsibility:-
 Co-ordinating with Construction Site term for daily construction related activities for project work.
 Handling Follow-up with procrument & engineering term for construction related all issues.
 Daily basis monitoring construction construction progress of project.
 Handling Shutdown activity for project work.
 Monitoring all activity of project from starting of construction work & Follow-up day to day activity & reporting to higher authorities.

Project.
 Project Name:
• Scope of Project: -
• 23 Nos. MSV with Carioles Meter & Red Eye Water Cut Meter installation.
• 24 x 28 kms & 14x 14 kms U/G GRE Pipeline Installation.
• 24 x 9 kms U/G GRE Pipeline Installation including replacing existing 8 CS Line.
• Installation of new MSVs, CS Bulk Headers, Manifolds, GRE Transfer Pipelines.
• Job Responsibility:
• Co-coordinating with Construction Term &Daily basis monitoring Construction Progress of Project
Handling Follow-up with procurement & engineering term for Construction issues.
• Handling Shutdown activity for project work (Including Hook up & Tie in).
• Monitoring all activity of project from starting of project & Follow-up day-to-day activity & reporting to
higher authorities.

OPERATION AND MAINTANCE OF 1000TPH CAPACITY BELT CONVYOUR IN COAL HANDLING SYSTEM FOR THERMAL POWER PLANT.

 Job Responsibility:-

• Operation handling for 2*1000TPH Capacity Belt Conveyor for Coal Handling System in 2*600 MW Capacity Thermal Power Plant.
• Maintance activity of CHP System in thermal power Plant.
• Responsible for process troubleshooting, process start-up & shutdown Activities, Process improvement and Process Planning.

 Job Assignments:-


• Inspection of plant’s equipments along with Operations, Maintenance and Technical services.
• Following Standard & Operating Procedures for handling Operation & Maintainence activity.