Electrical Supervisor
Nasser Al Hajri (NSH)
Total years of experience :9 years, 6 Months
Electrical & Instrument Pre-Commissioning In charge.
In-charge and monitor 200 Manpower in different site location.
Estimates, prepares and assign the resources such as manpower, materials, consumable, equipment, tools, etc., required for all electrical and related works prior to execution.
Plan and analyze all possible construction methodologies and recommends the best option to the Project Manager for approval prior to execution at sites.
Interprets construction drawings and studies the contract documents and applicable standard or specification prior to execution of any jobs.
Coordinates with the Client / Consultant’s Representatives for any site instructions and inspection of works.
Submit sites daily reports, inspection request, estimates and all applicable monitoring reports on regular basis as required.
Ensures that all the works done are in accordance with the approved construction drawing, contract document, project specifications, and all applicable standards whether local, national or international standard.
Directly responsible for the safety of all electrical groups’ personnel of the project by ensuring that the project execution will be done according to all applicable health, safety, sanitary standard.
Supervise during testing and Insulation Resistance of cable prior to specification and Client standard with IEC Reference.
• Electrical & Instrument Commissioning In charge.
• Estimates, prepares and assign the resources such as manpower, materials, consumable, equipment, tools, etc., required for all electrical and related works prior to execution.
• Plan and analyze all possible construction methodologies and recommends the best option to the Project Manager for approval prior to execution at sites.
• Interprets construction drawings and studies the contract documents and applicable standard or specification prior to execution of any jobs.
• Manage directly and provide engineering and technical support to all the electrical work groups at sites.
• Coordinates with the Client / Consultant’s Representatives for any site instructions and inspection of works.
• Assign targets of accomplishments and ensure targets are met on daily basis for all electrical groups at sites.
• Submit sites daily reports, inspection request, estimates and all applicable monitoring reports on regular basis as required.
• Ensures that all the works done are in accordance with the approved construction drawing, contract document, project specifications, and all applicable standards whether local, national or international standard.
• Ensures that all sites works are done according to all applicable quality standards.
• Directly responsible for the safety of all electrical groups’ personnel of the project by ensuring that the project execution will be done according to all applicable health, safety, sanitary standard.
• Design, implement, maintain, and improve electrical and instruments equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes
• Perform Solo Run Testing, simulation test for remote and local operation.
• Operate computer-assisted engineering and design software and equipment to perform engineering tasks.
• Responsible for Installation and Testing for the New Panel Cabinet.
• Sub-station operator for energizing and shutdown procedure
• Perform High-Pot Testing for Low, Medium High Voltage Cable and provide technical report prior to testing perform.
• Supervise during testing and Insulation Resistance of cable prior to specification and Client standard with IEC Reference.
• In-charge for inspection of cable pulling from substation to motor equipment
• Prepare the inspection for Cable Insulation Resistance Test (IR) and DC Hi-Pot for LV, MV, HV and Control along with the client.
• In-charge in the Motor Winding Test and Local Remote Control Switch for function test.
• Gather data in Solo Run Testing for the Vibration, Noise & Speed. Make recommendation for the acceptance of the Testing.
• Conduct and in-charge in work volume installation for Motor, Lighting and support installation.
• Electrical Panel Layout for installation of panel and electrical equipment.
Perform Solo Run Testing, simulation test for remote and local operation.
Perform High-Pot Testing for Low, Medium High Voltage Cable and provide technical report prior to testing perform.
In-charge for inspection of cable pulling from substation to motor equipment.
Inspect and test new panel before energize.
Prepare the inspection for Cable Insulation Resistance Test (IR) and DC Hi-Pot for LV, MV, HV and Control along with the client.
In-charge in the Motor Winding Test and Local Remote Control Switch for function test.
Gather data in Solo Run Testing for the Vibration, Noise & Speed. Make recommendation for the acceptance of the Testing.
Conduct and in-charge in work volume installation for Motor, Lighting and support installation.
Perform Solo Run Testing, simulation test for remote and local operation.
Estimates, prepares and assign the resources such as manpower, materials, consumable, equipment, tools, etc., required for all electrical and related works prior to execution.
Interprets construction drawings and studies the contract documents and applicable standard or specification prior to execution of any jobs.
Electrical & Instrument Commissioning In charge.
Electrical & Instrument Commissioning In charge.
Sub-station operator for energizing and shutdown procedure
Perform Solo Run Testing, simulation test for remote and local operation.
Perform High-Pot Testing for Low, Medium High Voltage Cable and provide technical report prior to testing perform.
In-charge for inspection of cable pulling from substation to motor equipment
Inspect and test new panel before energization.
Prepare the inspection for Cable Insulation Resistance Test (IR) and DC Hi-Pot for LV, MV, HV and Control along with the client.
In-charge in the Motor Winding Test and Local Remote Control Switch for function test.
Gather data in Solo Run Testing for the Vibration, Noise & Speed. Make recommendation for the acceptance of the Testing.
Conduct and in-charge in work volume installation for Motor, Lighting and support installation.
Perform Solo Run Testing, simulation test for remote and local operation.
Estimates, prepares and assign the resources such as manpower, materials, consumable, equipment, tools, etc., required for all electrical and related works prior to execution.
Interprets construction drawings and studies the contract documents and applicable standard or specification prior to execution of any jobs.
In-charge in the Motor Winding Test and Local Remote Control Switch for function test.
Fiber Optics Splicing Technician.
Responsible for cable pulling and termination of new and existing electrical equipment and facility.
Read and interpret engineering drawing and provide full detail and duties to fellow worker.
Prepare the inspection for Cable Insulation Resistance Test (IR) and DC Hi-Pot for LV, MV, HV and Control along with the client.
Conduct and in-charge in work volume installation for Motor, Lighting and support installation.
Make material take-off, bill of quantity and estimation.
Install support for cable tray and lighting panel.
Glanding and termination of power and control cable.
Loop testing and continuity of newly terminated cable.
Plan and layout for new cable routing and piping.
Install smoke, fire and heat detector.
Install bell and Manual Call Point.
Cable pulling of MICC cable for new device installed.
Glanding and Termination of MICC cable.
Line check for zoning of device.
Fabricate and layout cable tray and cable tray support.
Loop Testing for newly installed detector.
Assist vendor for testing and commissioning.
Operate Man Lift with Certification.
Estimates, prepares and assign the resources such as manpower, materials, consumable, equipment, tools, etc., required for all electrical and related works prior to execution.
Read and review engineering drawing for estimation.
Make revision and conduct site visit for BOQ.
Review BOQ and contract for installation.
Install fire detection device and security alarm system.
Install new panel with wireless communication.
Install and configure Honeywell Panel and zoning.
Install burglar alarm, Photo Electric Beam Detector, PIR Detector
Install and configure Access Control System, Finger Print Access System.
Install and configure Burglar Alarm System.
Install and configure different types and variety of CCTV Cameras.
Electronic communications engineering is the utilization of science and math applied to practical problems in the field of communications. Electronic communications engineers engage in research, design, development and testing of the electronic equipment used in various communications systems. It is due to electrical engineers that we enjoy such modern communication devices as cellular telephones, radios and television.