Ezekiel Akrong, 3G RF Optimization Consultant

Ezekiel Akrong

3G RF Optimization Consultant

Ericsson Ghana

Location
Ghana
Education
Bachelor's degree, Electrical And Electronic Engineering
Experience
9 years, 11 Months

Share My Profile

Block User


Work Experience

Total years of experience :9 years, 11 Months

3G RF Optimization Consultant at Ericsson Ghana
  • Ghana
  • January 2017 to March 2017

• Planning for 150 New 2nd Carrier Sites to be integrated
• Post 2nd Carrier Implementation Cleanup, Neighbor Additions and Parameter Tuning
• Check and Improve KPI for all 2nd Carrier sites for Customer Acceptance
• Ensure new 2nd Carrier Sites are accepted timely and signoff with customer
• Implementing other features as requested by Customer
• Develop final 2nd Carrier Strategy to be used for next batch of Implementations
• Coordinate Drive Test and customer complaints to the point of resolution after 2nd Carrier Sites is implemented.
• Prepare document of Limitations (RNC capacity, RBS Hardware limitations & Transmission Bandwidth) for customer; to be used for capacity planning for further KPI improvement on newly integrated 2nd Carrier Sites.

Network Performance and Optimisation Manager at HUAWEI TECHNOLOGIES SIERRA LEONE
  • Sierra Leone
  • January 2016 to December 2016

• Supervise & manage the Department Staff (Resource & logistics Planning, Activity Planning & supervision)
• Ensures project/activity schedules are met and within budgetary guidelines.
• Liaise with other division staff and other departmental heads in preparation of Network Performance Reports & Improvement plans, and also completion of specific projects requiring inter departmental coordination.
• Negotiate Managed Service KPI signoff customer
• Provides input for network strategy & refinement of business plans
• Ensures compliance with all company, Division, & Dept. procedures & policies
• To liaise with Operator (customer), Other Vendors and third Party Service providers on all matters relating to RF expansion requirements, ongoing optimization and network quality issues.
• Lead, manage and develop the RF staff through clear direction and performance management to ensure individual performance is aligned to goals and objectives.
• Ensuring that Senior Technical Management is kept up to date with regular progress reporting, with issues of significance being flagged
• Lead, manage and develop the RF staff through clear direction and performance management to ensure individual performance is aligned to goals and objectives.
• Performs other duties as assigned.

3G RF Optimisation Engineer at Huawei Technologies Sierra leone
  • Sierra Leone
  • October 2015 to December 2015

• Daily RAN KPI monitoring and degradation resolution
• Customer Complaints investigation and resolution
• Review and Acceptance of Newly integrated 2nd Carrier Sites and New Sites
• Daily Worst Cell troubleshooting, escalation and resolution
• Network-wide Iub limitation check and escalation to the TX team for capacity upgrade
• Alarm check and Escalation; follow up on FM team for resolution
• Cell wise HS-Throughput analysis and recommendations and execution of recommendations to improve throughput
• RAN Feature implementation and tuning
• Parameter Consistency check and Neighbor list updating
• Plan and execute physical optimization activities when required for KPI improvement, coverage improvement or customer complaint resolution
• CE, Power and DUW (HW) upgrade planning and implementation
• Attend weekly customer review meeting for detailed discussion on weekly KPI trends and action Plans
• Provide KPI analysis and reporting support when NON RF initiated activities are performed by other Departments (eg TX related activities and PS/CS Core network related activities)

3G RF Performance Engineer at Huawei Technologies Tanzania
  • Tanzania
  • December 2014 to August 2015

• Daily RAN KPI monitoring of Cells on assigned RNC (with 1539 cells); RRC establishment Success, RAB establishment, CS-PS-HS RAB drop, IRAT-HO, SHO
• Daily Worst Cell troubleshooting, escalation and resolution
• Network-wide Iub limitation check and escalation to the TX team for capacity upgrade
• Alarm check and Escalation; follow up on FM team for resolution
• Key Area HS-Throughput analysis and recommendations and execution of recommendations to improve throughput
• Benchmarking DT analysis and report preparation for customer review
• Supervise and support field teams on physical optimization activities
• WNCS scheduling and definition of missing neighbors
• Investigate and Resolve Customer complaints timely; making proposals where necessary for improvement of customer experience.
• Preparation of weekly RAN performance reports for review with customer; highlighting weekly achievements, worst cells and action plans for the upcoming week
• Network Parameter audit and Tuning
• New Feature proposal and implementation and preparation of pre and post implementation impact analysis report.

2G/3G RF Optimisation Engineer at Ericsson Ghana Ltd
  • Ghana
  • January 2014 to December 2014

• Prepare Post Site Integration Performance Reports for Customer Acceptance
• Perform KPI optimization Measures to clear all degradation issues resulting from Site expansions and integrations
• Initial Tuning of 2G/3G new Site rollouts
• Prepare Frequency Plan and CDD for new site integration and IBS rollout
• Supervise Field team in clearing snags and improving KPI.
• 2nd/3rd Carrier Pre implementation Audit
• UMFI list definition on BSS
• Scrambling Code Planning
• DB preparation for new Node B Rollout
• Preparation and Review of Node B SSV for Acceptance
• Preparation of CDD for 2G new site integration and site Upgrades
• Post site integration/Upgrade KPI monitoring and performance tracking
• Post integration/Upgrade KPI improvement analyses and parameter tuning
• Preparation of performance Report for Site Acceptance
• Resolution of post upgrade/installation snags, alarm clearing fault

RF (Drive Test) Team Lead at Admin Telecom, Ghana
  • Ghana
  • November 2013 to January 2014

• Provide detailed drive Test Benchmarking report for comparison of AIRTEL, TIGO, VODAFONE, MTN and GLOBACOM network.
• Drive Test Logs (2G/3G) analyses & Post Processing.
• Outline Reasons for Poor KPI CSSR, TCH drop, RAB Drops, HOSR, SHO, Throughput and Recommend Solutions.
• Attend Review Meetings with Customer to review Benchmark Reports

3G/2G RF Optimisation Engineer at Ericsson Ghana ltd
  • Ghana
  • October 2011 to December 2013

• Preparation of Weekly Performance Report and Attending (Weekly) Governance, KPI Status and Improvement meetings with Customer (Airtel).
• Daily worst cell analysis (CSSR, CS/PS RAB Drops, SHO, IRAT, TCH/SDCCH cong, HOSR, and Data throughput) and Equipment fault/TX issues escalation on both 2G and 3G network.
• Recommendation & Implementation Radio network features changes such as IRC, Cell load sharing, Fast Dormancy, RNC RRC load sharing, Service Based HO etc.
• Scheduling and analyzing recordings on OSS-RNO, FAS, FOX, and MRR/WMRR, WNCS for optimization activities
• Initiate and coordinate the Frequency planning activities, implementation of new frequency plan and fine tuning after plan has been implemented.
• Supervise/Correspond with field teams on RF trouble shooting exercises (DRU replacement, DXU replacement, Feeder and Antenna system replacement, VSWR test) on site so as to improve RAN network KPI’s.
• Ensure parameter optimization, neighbor optimization, faults/alarms clearing, CE expansion and License upgrades are done timely to improve and maintain 3G KPI (RRC, RAB success, IRAT Handovers and Data throughput) for all services -CS and PS.
• Drive Test Benchmarking and Recommendations for improvement.
• Support governmental regulation requests
• Customer Complaints investigations and resolution.
• Perform Parameter Consistency checks regularly

Radio 2G/3G RF Optimization Engineer/ Network Performance Improvement Assistant Team lead at Ericsson Rwanda
  • Rwanda
  • January 2013 to August 2013

• Preparation of Weekly Performance Report and Attending (Weekly) Governance, KPI Status and Improvement meetings with Customer (Airtel).
• Daily worst cell analysis (CSSR, CS/PS RAB Drops, SHO, IRAT, TCH/SDCCH cong, HOSR, and Data throughput) and Equipment fault/TX issues escalation on both 2G and 3G network.
• Recommendation & Implementation Radio network features changes such as IRC, Cell load sharing, Fast Dormancy, RNC RRC load sharing, Service Based HO etc.
• Scheduling and analyzing recordings on OSS-RNO, FAS, FOX, and MRR/WMRR, WNCS for optimization activities
• Initiate and coordinate the Frequency planning activities, implementation of new frequency plan and fine tuning after plan has been implemented.
• Supervise/Correspond with field teams on RF trouble shooting exercises (DRU replacement, DXU replacement, Feeder and Antenna system replacement, VSWR test) on site so as to improve RAN network KPI’s.
• Ensure parameter optimization, neighbor optimization, faults/alarms clearing, CE expansion and License upgrades are done timely to improve and maintain 3G KPI (RRC, RAB success, IRAT Handovers and Data throughput) for all services -CS and PS.
• Drive Test Benchmarking and Recommendations for improvement.
• Support governmental regulation requests
• Customer Complaints investigations and resolution.
• Perform Parameter Consistency checks regularly

Rf Optimization Engineering at Infratech- Africa Ghana limited
  • Ghana
  • April 2010 to October 2011

• Perform 2G and 3G drive test and analyze route data, optimize newly integrated cell sites
• Perform RF acceptance test (drive test and data test) on newly integrated sites
• Perform Drive test to verify handover success, call setup success and coverage before and after hardware changes, expansion, and configuration changes are made on site
• Supervise RF antenna re-orientation; tilting and height changes to conform to RF plan and ensure that coverage and capacity objectives of the installations are met.
• Implement network feature changes such as half rate, Cell load sharing, Layer threshold, CRO and other related features that help in optimizing the network.
• Recommend and supervise major changes to an installation; e.g. HEIGHT, TILT and AZIMUTH
• Supervise RF trouble shooting exercises (DRU replacement, DXU replacement, Feeder and Antenna system replacement, VSWR test) on site so as to improve network KPI’s (SDCCH congestion, SDCCH drops, TCH congestion, TCH drops, Handover Success Rate)
• TSS for microcell installations


• Multi Band Cell Experience

• Perform site audits for MBC cells, ensuring that both bands have the same antenna Mechanical and Electrical Tilts and Azimuth.
• Verify parameters such as BAND, CYSTYPE, FBOFF and MBCRAC as planned
• Perform drive test to confirm if successful handover between 900 and 1800 frequencies in the same MBC cell
• Verify neighbour cell list is changed after cell reconfiguration from dual band configuration to MBC configuration and vice versa
• Perform hardware troubleshooting on MBC cabinets (with or without TG synchronization) for faulty DRU's; Sweep test on Feeders in the same MBC cell and replacement of feeders with poor VSWR.

• Making HR changes at cell level prior to special events in a cell serving area to ensure that the cells do not congest for that period

RF planning Engineer, Telecom Installation Coordinator, Transmission Engineer at Millicom Ghana limited
  • Other
  • October 2006 to September 2009

 Monitored all SDH and PDH links in the network using Ceramap (Ceragon and IONOS- NMS v4 respectively)
 Log, analyze, resolve and escalate all faults on all microwave links to Field Maintenance Manager
 Supervised Riggers and Technicians to carry out major hardware changes on cell sites.
 Configuration and management of trails on ADR155c, ADR2500Xtra (Sagem) and ADM (Ceragon) multiplexers.
 Plan and implement site migration from one radio equipment to the other, usually from lower to higher E1 capacity radio; PDH to SDH.
 Configured network management interface cards on Sagem microwave radio equipment to enable accessibility on IONOS-NMS v4
 Work on IP plan for the network management system
 Carried out general maintenance on both Ceragon and Sagem radio equipment
 Operation and maintenance of Ericsson RBS 2206, 2216, 2202, 2207, 2106 using OMT
 Implement change request/planned work on all Ericsson BTS, Sagem microwave and Ceragon SDH microwave equipment.
 Update report on E1 usage in the transmission network

TRansmission Engineer at Millicom Ghana Ltd
  • Ghana
  • October 2006 to August 2007

 Monitored all SDH and PDH links in the network using Ceramap (Ceragon and IONOS- NMS v4 respectively)
 Log, analyze, resolve and escalate all faults on all microwave links to Field Maintenance Manager
 Supervised Riggers and Technicians to carry out major hardware changes on cell sites.
 Configuration and management of trails on ADR155c, ADR2500Xtra (Sagem) and ADM (Ceragon) multiplexers.
 Plan and implement site migration from one radio equipment to the other, usually from lower to higher E1 capacity radio; PDH to SDH.
 Configured network management interface cards on Sagem microwave radio equipment to enable accessibility on IONOS-NMS v4
 Work on IP plan for the network management system
 Carried out general maintenance on both Ceragon and Sagem radio equipment
Operation and maintenance of Ericsson RBS 2206, 2216, 2202, 2207, 2106 using OMT
Implement change request/planned work on all Ericsson BTS, Sagem microwave and Ceragon SDH microwave equipment.
 Update report on E1 usage in the transmission network

Education

Bachelor's degree, Electrical And Electronic Engineering
  • at Kwame Nkrumah University of Science and Technology
  • June 2005

2nd Class Upper_ BSC. Electrical/Electronic Engineering

Bachelor's degree, ELECTRICAL AND ELECTRONIC ENGINEERING
  • at KWAME NKRUMAH UNIVERSITY OF SCIENCE AND TECHNOLOGY
  • May 2005

Specialties & Skills

Rollout
RF Engineering
Telecommunications Consulting
Telecommunications
MICROSOFT OFFICE
TEMS Investigation , Drive Test and Analysis

Languages

English
Expert

Memberships

PMI
  • Certified Associate of Project Management
  • December 2008

Training and Certifications

CERTIFIED ASSOCIATE OF PROJECT MANAGEMENT (CAPM) (Certificate)
Date Attended:
September 2008
Valid Until:
December 2008

Hobbies

  • Playing musical instruments
    I play the Piano quiet well; and as such have played with various bands as a profession; in jazz clubs and for religious organizations in Ghana and Rwanda.