Fadli Yusandi

as senior process engineer for Offshore and LNG Project
FEED project.
• Call-Off Project for NOC (North Oil Company -
Based in Doha, Qatar.
a. BA Workovers Project
◦ Prepare Piping & Instrument Diagram (P&ID)
◦ Prepare Hydraulic Calculation and Hysys Simulation
◦ Prepare Line List, Valve Tag Index, LO/LC Register

b. BG Project
◦ Prepare Piping & Instrument Diagram (P&ID)
◦ Prepare Process Basis of Design
◦ Prepare Line List, Valve Tag Index, LO/LC Register
◦ Prepare Hysys Simulation
◦ Prepare Adequacy Check Report using Hysys Dynamic
◦ Prepare Hydraulic Calculation - Brownfield Scope (QatarEnergy)
Based in Doha, Qatar.
◦ Prepare Piping & Instrument Diagram (P&ID)
◦ Prepare Process Flow Diagram (PFD)
◦ Prepare Line Sizing Calculation
◦ Prepare Process Safeguarding Flow Scheme (PSFS)
◦ Prepare Material Selection Diagram (MSD)
◦ Prepare Line List
◦ Attending HAZOP, LOPA, and SIL Study
◦ Preparing Process List (Line List, Utility List, etc)
◦ Preparing Process Report (Design Basis, Safeguarding Memo, etc.)

Brief description: as senior for Offshore and LNG Project
FEED project.
• for Oil Company - in Doha, Qatar.
List of projects:
a. BA Project
b. BG Turbine Power Upgrade Project
c. Disposal Pump Installation Project
d. Removal Project
e. Project
List of activities:
◦ Developing P&ID/PFD
◦ Developing Process Basis of Design
◦ Reviewing Line List, Valve Tag Index, LO/LC Register
◦ Developing Hysys Simulation, include Dynamic Simulation as
required.
◦ Report such as; Check Report, Calculation Report, Sizing Calculation Report, and Pressure Study
◦ Effect Matrix

description: Contract employment status, as project and process
engineer for metallurgy EPC project.
• Indonesia Freeport Smelting Project / Manyar Smelter Project
(PT Freeport Indonesia)
Based in Yokohama, Japan.
◦ Review Licensor / Vendor Process Document (P&ID, PFD, Material
Balance, etc.)
◦ Arrange Coordination Meeting with Client
◦ Arrange Coordination Meeting with Licensor / Vendor
◦ Prepare Process Document (Design Basis, Hazardous Source List,
By-Product and Waste List, Chemical & Catalyst List, etc.)
◦ Prepare Hydraulic Calculation, PSV Calculation, etc.
◦ Prepare Process Flow Diagram and P&I Diagram
◦ Prepare Document Submission to CDMS (Controlled Document
Management System)
◦ Prepare Process Data Input for Intra-Discipline datasheet (Mechanical,
Piping and Instrument)
◦ Prepare Minutes of Meeting (MOM) for the Meetings with
Client/Subcontractor
◦ Prepare Air Blowing documents for pre-commissioning
◦ Prepare Water Flushing documents for pre-comissioning
◦ Perform Coordination Meeting related with Environmental Issue
◦ Perform Coordination Meeting related with Jetty & Wharf Issue

Brief description: Contract employment status, as project and process
engineer for metallurgy EPC project. Indonesia Freeport Project / Project
(PT Yokohama, Japan.
• Reviewing Licensor / Vendor Process Document (P&ID, PFD, Material
Balance, etc.)
• Arranging Coordination with Client, Licensor or Vendor
• Developing Process Document (Design Basis, Hazardous Source List,
By-Product and Waste List, Chemical & Catalyst List, etc.)
• Developing Hydraulic Calculation, PSV Calculation, etc.
• Developing Process Flow Diagram and P&I Diagram
• Involving in Document Submission through CDMS (Controlled
Document Management System)
• Providing Process Data Input for Intra-Discipline datasheet
(Mechanical, Piping and Instrument)
• Handling Minutes of Meeting (MOM) for the Meetings with
Client/Subcontractor
• Providing pre-commissioning documents such as; Air Blowing system
and Water Flushing system
• Arranging Coordination with Environmental Related team and ensuring
meet the local authority regulation.
• Arranging Coordination with Jetty & Wharf related team and ensuring
the product export and feed import requirement.
• Developing the Product Handling Design Basis for Copper
Concentrate unloading reclaimer and Sulfuric Acid loading arm.

Crude Oil and Gas Project (onshore facility) FEED Bambu Besar
PT Pertamina EP
• Developing Flarenet Simulation
• Developing Flare & Blowdown System Design Report,
• Developing Calculation such as; PSV Sizing and Separator Sizing Gross Handling Project Lapangan Jirak
PT Pertamina EP
• Developing Flarenet Simulation
• Developing Flare & Blowdown System Design Report,
• Developing Separator Sizing Jambaran Tiung Biru (JTB) Gas Development Project
Pertamina EP Cepu : H2S Removal Unit & Propylene Unit
• Developing Pump Sizing and Tank Sizing
• Developing Package System Datasheet

Crude Oil and Gas Project (onshore and offshore facility)
• SMO - HO Flare and Relief System Assessment
(Central Gathering Station Facilities, Automatic Well Test Facilities and
Gas Plant Facilities)
◦ Prepare Adequacy Check Calculation for Existing PSV.
◦ Prepare Flarenet Simulation
◦ Prepare Flare, Vent and Relief Network Modelling Report,
◦ Prepare Existing PSV Calculation using iPRSM Web Based
◦ Prepare Back Pressure Calculation using Flarenet.
◦ Prepare Process Summary Report

Check Study PSV.
• Developing Flarenet Simulation, including Flare, Vent and Relief
Network Modelling Report,
• Developing Existing PSV Sizing check using iPRSM Web Based
• Developing Back Pressure Calculation using Flarenet.
• Developing Process Summary Report
• Developing Knock Out Drum Sizing
• Site Visit Survey
• Developing As Built P&IDs

Crude Oil Project (onshore facility)
• Well Connection Study
◦ Calculating the Flowline Capacity
◦ Developing Process Study Report
◦ Developing PSV Capacity Calculation
◦ Developing P&IDs and ESD Logic Diagram
◦ Participating in HAZOP
◦ Calculation of Restricted and Impacted Area
• Engineering Assistance Request - Re-routing Water Connection Study
◦ Developing Calculation such as; Line Capacity Check, CV Capacity
Check, Separator Capacity Check, and Fuel Gas Consumption
◦ Developing Process Hysys Simulation
◦ Developing Process Report
◦ Reviewing Cost Estimation Summary

Crude Oil Project Mutiara-8 Plant Capacity Upgrading Project and Southern Mutiara HP
Compressor gas lift installation
• Developing Process Report
• Developing P&IDs and PFDs
• Developing Hysys Process Simulation, Blowdown and
Depressurization Simulation
• Develping Calculation for Flare Stack Sizing Check, Line Sizing,
Separator Sizing, PSV Sizing, Settling out compressor and Fuel Gas
Consumption.
• Developing Flare Dispersion Simulation
• Participating in HAZOP and SIMOPS
• Developing SWP for SIMOPS
• Developing PHSER Report
• Movable Compressor Project
• Preparing Process Report
• Developing P&IDs and PFDs
• Calculation of Fuel Gas Consumption
• Developing PHSER Report

Crude Oil Project (offshore and onshore facility) Blanket Conceptual Engineering, Client : PHE ONWJ
Project; Produced Water Improvement Terminal System Development Greenfield Development Brownfield Reactivation Description;
• Developing process documents
• Developing PFDs / P&IDs
• Developing Calculation such as; Line Sizing Calculations, Pump
Hydraulic Calculations, Process Equipment Calculations
• Developing Hysys Process Simulation and Pipesim Simulation
• Flow Assurance Study
• Participating in HAZOP/HAZID As P&ID Update existing P&ID Developing new P&ID for new equipment Site Survey

• Doing Consistency Check between PFD/UFD, Datasheet,
Equipment List and P&ID
• Developing Calculation such as; Line and Pump Hydraulic
Calculation, PSV Sizing, Utility Consumption & Nitrogen
Consumption for Tank Inbreathing/Outbreathing, Tank Sizing, and
Separator Sizing.

• Developing Piping & Instrument Diagrams especially in Water
Treatment Area.
• Calculating Line Size in Water Treatment Area.
• Preparing Tank Calculation, especially Treated, Demin, and Potable
Water Tanks
• Preparing Pump Hydraulic Calculation especially in Water
Treatment Area.