Well Testing Operator
Al Mansoori Specialized Engineering
مجموع سنوات الخبرة :12 years, 2 أشهر
Familiarised with oil field services such as Coil Tubing, Logging and Perforation, Stimulation, Slick Line and Drilling. However, being part of a Well Testing crew, performed duties such as
Working on high and low pressure Gas/Oil wells both Onshore and Offshore;
Onshore: ADCO ( Dabieyah, Rumaitha, Habshan, Buhasa, Quashawera, Asab), Al Husn Gas (Shah)
Offshore: ADMA (Zakum)
Working as an in-charge for Killing/Flaring the well job.
Familiarising with Completion diagrams and X-mas Tree drawings.
Preparing and Pressure testing where required, the following Well Testing Equipment; 1440 and 2000 psi Separators, 10k and 15k psi Choke Manifolds, Surge Tanks w/ transfer pump, Diesel Re-Injection pump, Flow heads and coflexip hoses, ESD Valves and Panels, Eruption Manifold, Pipes (1502, 602), Elbows (1502, 602), Cross Over, Dataheader, Chemical Injection Pumps, Diverters, Storage Tanks, Burner Boom, Green Burner, Flare Stack, Fittings etc.
Performing maintenance of all the job related equipment.
Performing Data Acquisition using Fekete Software.
Performing pre/post job equipment inspections.
Carrying out the mobilization & equipment layout, rigging up surface equipment related to the job according to practice and standards.
Collecting data and evaluating results further compiling them in a report.
As an Academic project, worked on an Energy Audit of a tower,
• Conducted an Energy Audit for a high rise tower in Dubai Marina.
• Got familiarised with the ASHRAE standards
• Suggested and worked on ideas concerned with reduction of CO2 footprint of the tower
• Conducted an HVAC sizing for the tower to check if the number of chillers in the tower met the cool load requirement
As a summer internship program, worked at the BHEL manufacturing plant,
• Learned about the Standards and Procedures that are taken in the manufacture of Steam Turbines, Heat Exchangers, Turbo Generators and Brushless Exciters.
• Conducted a detailed study on the manufacture of Turbo Generators and Brushless Exciters followed by a report.
In my Bachelor’s in Engineering at HWDC I excelled academically with overall good grades. However, in my last year I have successfully obtained a First Class Honors degree with specialization in Thermodynamics and Fluid Mechanic. I am also the winner of ‘Henry Black Prize’ for the best honors year project in all of the Heriot Watt University campuses around the world. I am a very dedicated, hard working person hoping to make a difference. Honors Year Project: Finite Element Modelling of Charpy Impact Test. Summary: In this project, Using Abaqus software, a 3D model of a Charpy Impact Test was developed under the influence of ASTM Standards. All the non-linearity sources were considered in the development of the model. Two materials were tested for their toughness by the model i.e. AISI 4140-T Steel and Aluminium A6061-T6. Along with various cases, a comparison study was performed between conducted 3D model and 2D approximation.
Subjects: Maths and Physics
Subjects: Maths Physics Chemistry Information Technology English