Sr. Mechanical Engineer
Descon Engineering Qatar
مجموع سنوات الخبرة :16 years, 9 أشهر
Joined Descon Engineering Qatar in Jan 2017 and executed following projects:
• Project at Q-Chem for shut down 2017 at Umm e saied Qatar for static equipment for PE and for Utility equipment, steam turbines and miscellaneous assignments
•Project at Qatar Petroleum shut down 2018 at Umm e saied Qatar for replacement and erection of new reactor and maintenance of Reactor re generator and miscellaneous assignments
KEY ROLES:
Responsible for the overall commissioning activities by liaising with clients and the project execution team to ensure both the commercial and technical performance is in line with the project requirements.
Where applicable and supported by appropriate qualifications, performs technical review of project pre-/commissioning related documentation at tender stage (including site visits at tender stage).
Where applicable, perform technical studies and provides input/assistance to other sections or projects under the direction of the group manager, pre-/commissioning.
Review and make recommendations for the continuing development and improvement of pre-/commissioning procedures
Managed Shut down maintenance execution and trouble shooting for Factory utilities and Poly ethylene equipment mainly vessels, valves and static, drums, tanks, filters, Boilers, flares, erection of new Reactors, heat exchangers, steam turbine.
KPI, down time management, maintenance within budget, Resource and Manpower management engineering and execution, Team performance management, Team development and retention, compliance preparedness, cost saving and capital budget, daily maintenance.
Project execution for the removal and erection of new reactor manufactured by Spain.
Site visiting and planning for the removal of related piping and static, removal of structures and reactor
Planning for the transportation and lifting arrangement for removal of old reactor
Coordination with client for the execution works and day to day update sharing with client.
Supervised and lead the execution team for the removal of old reactor and erection of new reactor
Supervised project for weld over lay job done on the reactor regenerator.
Site visiting and planning for the removal of related piping and static, removal of structures and reactor
Planning for the transportation and lifting arrangement for removal of old reactor
Coordination with client for the execution works and day to day update sharing with client.
Supervised and lead the execution team for the removal of old reactor and erection of new reactor
Project execution for the removal and erection of new reactor manufactured by Spain.
Supervised project for weld over lay job done on the reactor regenerator.
KEY ROLES
Factory KPI, Manager Maintenance, shut down time management, maintenance within budget, Manpower management, Team performance management, Team development and retention, compliance preparedness, cost saving and capital budget, daily maintenance. Engineering, recourse management, planning and execution
Prepared Preventive maintenance programs, project work plans and time schedules for expansion projects.
Construction, Installation of machines, Pumps, compressors, rotating and static equipment.
Technical assessment for selection and purchasing of production machines and relevant utilities
KPI, down time management, maintenance within budget, Resource and Manpower management engineering and execution, Team performance management, Team development and retention, compliance preparedness, cost saving and capital budget, daily maintenance.
KEY ROLES
Responsible for the overall commissioning activities by liaising with clients and the project execution team to ensure both the commercial and technical performance is in line with the project requirements.
Generate or coordinate preparation and review with internal and external clients of pre-/commissioning procedures & plans. Resolve issues and recommend acceptance of agreed documentation.
Undertakes responsibilities for site activities ensuring work is completed in accordance with project specifications, to the required quality standards and within prescribed timeframes. Includes allocation of resources and monitoring of usage.
Perform periodic technical audits on projects, suppliers, sub-contractors to ensure compliance relevant to the pre-/commissioning project works cope.
Define the system/ subsystem using OPERCOM methodology
Develop comprehensive reports on a weekly/ monthly basis.
Developing and providing training seminars for project personnel.
Providing pre-/commissioning related input to EPC projects including design review
Provided logistic support for execution of shut down maintenance and construction projects with SABIC and its affiliates.
Supervision of major shut down projects done with Sadaf, Albaironi, IBN Sina, AL-Sharq, Maraffaq, Tasnee, Al Maaden, Rasta Nura (Aramco )and other industries
As project engineer planned, senior mechanical engineer/Project Mechanical Engineer arranged resources, logistic support, transportation and lifting equipment and project quality control, scaff folding, insulation. Did Planning, supervision and execution of project activities and monitoring the projects.
Packaging, welding, construction& fabrication of lube oil skids practicing workshop equipment. Did Preparation of daily, weekly and monthly reports of project
Did shut down projects and maintained existing facility and equipment in a proactive manner to replace, or make adjustments to plant facilities and equipment
Planning and execution of maintenance for static equipment columns, reactors and pressure vessels and utility, columns, tanks for internal jobs and executed hot work inside
Co-ordination with client for regular availability of work front and monitored compliance for safety & environment
Preparation of mechanical work, data sheets, specification, material requisition of pipelines, valves etc
Construction works for erection of Piping and static for centrifugal air compressor installation, supervision of fabrication, welding, painting and commissioning at site
Programming, scheduling and assistance in budget preparation and cost management.
Co-ordinate regular site inspections to monitor standard of work and completion
schedule. Managed and provided engineering and technical supervision to execute the works
effectively. Submit requirements and justifications for resources such as materials, tools, equipment’s and man power. Monitor for accuracy and variance.
Coordinate internal resources and third parties/vendors for the flawless execution of projects.
Ensure that all projects are delivered on-time, within scope and within budget.
Assist in the definition of project scope and objectives, involving all relevant stakeholders and ensuring technical feasibility. Ensured resource availability and allocation .Develop a detailed project plan to monitor and track progress. Manage changes to the project scope, project schedule, and project costs using appropriate verification techniques. Successfully manage the relationship with the client and all stakeholders. Perform risk management to minimize project risks. Establish and maintain relationships with third parties/vendors. Create and maintain comprehensive project documentation.
KEY ROLES
As a project manager (Manager Technical)remained responsible for department operations, did procurement and contracts management, Project management, planning and execution for production, cost controlling and resource allocation for industrial and infrastructure development projects
Designing and management of electrical, mechanical and civil works for plants
Prepared project work plans and time schedules of project activities to achieve desired targets using MS Project for industrial and infrastructure development
Implemented cost effective systems to control over capital, operating expenditures, manpower, wages and salaries. Controlled and minimized technical down time, operational down time, labor overtime, and repair expenses. Implemented ISO 9001-2008 and OHSAS practices and did monitoring and evaluation of project. Set up quality control circles, assess potential quality risks, and evaluate human factors and natural process variation. Actively participate in definition of test requirements, justification of acceptance limits and sampling plans to assure compliance with requirements
Technical assessment for selection and purchasing of production machines and relevant utilities
Designing, development and production for Industrial projects for different industrial sectors
Construction projects for infrastructure development for HVAC, piping and energy sectors .Execution of plant shut down maintenance for HVAC units, utility equipment, compressors, chillers, generators, factory utility, boilers, tanks, drums and other equipment
Used organizational skills, ability to prioritize workload, as a team player with strong communication skills. Supported the project team during their day-to-day operations. Implemented management instructions for projects, services and planned maintenance
Experience of CADM, CAM, Auto Cad, Programming, scheduling and assisted in budget preparation and cost management. Co-ordinate regular site inspections to monitor Quality .Managed and provided technical support to the supervisors to execute the works effectively
Did procurement and contracts management for required resources such as materials, tools,
equipment’s and services.
3. Company Name & Location: Ittefaq Sugar Mills Sahiwal
Employment Dates : August, 2000 - July, 2002
Position Title : Project Engineer (Mechanical)
Maintained existing operation facilities and equipment in a proactive manner seeking to replace, or make adjustments to plant facilities and factory utilities.
Coordinated activities to ensure that objectives are accomplished in a timely and cost effective manner
Implemented internal operations to ensure that the company’s assets are maintained and protected through proactive planning. Worked under rules & regulation of safety & environment
Plant shut down maintenance execution for evaporators, drums, vessels, tanks, boilers, heat exchangers
Installation of pumps for chemical and sugar processing pumps and equipment
Construction of steam and water pipe lines for different projects. Maintenance of cooling towers and power house. Maintenance of bull gears and steam turbines and power house piping and static
Did construction projects for expansion and infrastructure development
Session 1996 to 2000 BSc. Mechanical Engineering University of Engineering and Technology Lahore
1992-1994 Fsc. Govt. College Sahiwal. Pre engineering