QC Engineer
Olayan Descon
مجموع سنوات الخبرة :13 years, 10 أشهر
Project: DELMON
• Client: IFFCO-KSA
• Designation: QAQC ENGINEER
• Major Area: PIPING, EQIPMENTS
Project: ARAMCO VRU NJBP
• Client: NJBP-ARAMCO
• Designation: Procurement Quality Supervisor
• Major Area: Procurement Quality of Material(CS, SS, RTR), Dealing with SAVID
YANPET ETHYLENE UNIT TURNAROUND- Package: Lump-sum-II & Lump-sum-III
• Client: Yanpet
• Designation: QC Engineer
• Major Areas: Pressure vessels (Columns, HE Drum), Piping, Tanks, Sumps (ASME Sec VIII Div I, ASME B 31.3, API660, API650)
SAMREF T/A MAR 2018 - Block T5
• Client: SAMREF
• Designation: Turn Over Engineer
• Major Area: Pressure Vessel, Piping ASME Sev VIII Div I
Product Purge Bin modification (ASME R-2 Stamped, Alteration job)
• Client: YANSAB, SABIC
• Designation: QC Engineer
• Major Area: PPB Vessel & Associated piping ASME Sec VIII Div I
RE-TUBING OF HEAT EXCHANGERS IN MONOMER
• Client: Petro Rabigh
• Designation: QC Engineer
• Heat Exchanger ASME Sec VIII Div I, API 660, TEMA
REPAIR OF CONVECTION SECTION OF SPLITTER HEATER 66-B-01
• Client: Samref
• Designation: QC Engineer
• Heat Exchanger ASME Sec VIII Div I, API 660, TEMA
F-9008 STORAGE TANK REPAIR WORKS (MATERIAL SUPPLY AND ROOF REPLACEMENT)
• Client: LUBEREF- YANBU
• Designation: QC Engineer
• Major Area: Tank API 650/653
Upgrade The Heater B-2001 Heater Radiant Coils & External Piping and Replacement of super - heater line internal jacket for B-8001 /2&3 (ASME R Stamped repair Job as per NBIC)
• Client: LUBEREF- YANBU
• Designation: QC Engineer
• Major Area: Heater Piping ASME Sec 1
IN KIND FABRICATION OF HEAT EXCHANGER BUNDLE E-1021A/E-1021 (ASME U-Part)
SUPPLY & FABRICATION OF LIKE FOR LIKE TUBE BUNDLE FOR E-1002A (ASME U-Part Job)
• Client: LUBEREF YANBU
• Designation: QC Engineer
• Heat Exchanger ASME Sec VIII Div I, API 660, TEMA
Cleaning & Maintenance of DCAC (32-E-001), Evaporation Cooler (32-E-002), Molecular Sieve (32-DR-001 A/B) NIGC Yanbu KSA
• Client: NIGC
• Designation: QC Engineer
• Major Area: Cooler
Up gradation of NRV/IV with SS 904L material (shutdown)
• Client: IBN RUSHD (SABIC)
• Designation: Site QC & Welding I/C
• Major Area: Welding ASME B31.3
Overhauling of Manual valves & SPVs
• Client: ODICO Valve shop
• Designation: QC Engineer
PROCUREMENT, FABRICATION & SUPPLY OF 22 HEAT EXCHANGER BUNDLES
• Client: Samref
• Designation: QC Engineer
• Major Area: Heat Exchanger ASME Sec VIII Div I, API 660, TEMA
Execution of 03 nos. MOC in Diesel & Oil Movement Complex - YASREF
• Client: Yasref
• Designation: QC Engineer
• Major Area: Process Piping ASME B 31.3
Supply In-Kind HX 2E-1231
• Client: Yanpet
• Designation: QC Engineer
• Heat Exchanger ASME Sec VIII Div I, API 660, TEMA
DEWATERING SCREENS (LSTK PROJECT)
• Client: YANPET, SABIC
• Designation: QC Engineer
• Major Area: Piping as per ASME B 31.3
CONSTRUCTION OF RABIGH IWSPP STEAM SHEDDING SYSTEM
• Client: RAWEC, RABIGH
• Designation: QC Engineer
• Major Area: Piping as per ASME B 31.3
New 6" Line Of Nitrogen From West Tank Farm To Marine Terminal
• Client: YASREF Refinery
• Designation: QC Engineer
• Major Area: Piping as per ASME B 31.3/ GRE Piping
Relocation of RCO Tie Ins at Saudi Aramco - Luberef, Yanbu
• Client: ARAMCO Refinery (Yanbu Refinery)
• Designation: QC Engineer
• Major Area: Piping as per ASME B 31.3
Sales Gas Connections For Customers In Lipe-1 Project MARAFIQ, Yanbu KSA
• Client: MARAFIQ & SIIMCO
• Designation: QC Engineer
• Major Area: Pipe line as per ASME B 31.8
Hadeed Piping & Straightening shop Project (SABIC) Jubail, KSA
• Client: E-Tec (Korea)
• Designation: Welding Inspector
• Major Area: Piping as per ASME B 31.3 /GRE Piping
• Responsibilities:
o Review of WPS for P1 & WQT
o Welder cards Preparation and welder log preparation
o Implementation of welding Quality as per approved procedures at site.
o Material receiving inspection as per ASME sec II part A & C.
o Material receiving inspection of GRE Pipes
o Consumable storage and handling as per consumable handling procedure.
o maintaining the record of all consumables
o Fit up inspection
o Pre Welding as per Approved wps
o Joining of GRE pipies through adhesive /but wrap method
o During welding inspection
o Post welding inspection
o RT of 10% welds joints and Review of films.
o Welding summary preparation and maintaining complete record
o Bolt torqueing of flanged joints.
o Walk through, Punch listing and closure of A punches.
o HT of piping job as per ASME B 31.3/HT procedure.
o Paint/paint touch up .
o Final walk through and acceptance and dossier review.
Sarada Gas Supply Project (SABIC) Jubail, KSA.
• Client: E-tec (Korea)
• Designation: QC Engineer
• Major Area: Pipe line as per ASME B 31.8
• Responsibilities:
o Preparation of Quality procedure (ITP, Pressure Test, Painting, NDT etc), as per SOW/ASME S31.8 Process piping code/client specs.
o Preparation of WPS for P#1
o Approval of procedures from client.
o Implementation of Quality as per approved procedures at site.
o Material receiving inspection as per ASME sec II part A & C.
o Consumable storage and handling as per consumable handling procedure
o Welding as per Approved wps
o RT of 100% weld joints and Review of films.
o Walk through, Punch listing and closure of A punches.
o HT of piping job as per ASME B 31.8/HT procedure.
o Paint/paint touch up .
o Final walk through and acceptance and dossier review
•
Loading Rack Facilities Project. Rastanura Refinery, KSA
• Client: Aramco (Dragados Gulf Construction Company)
• Designation: Welding Inspector
• Major Area: Pipe line as per ASME B 31.83
• Responsibilities:
o Fit up/Pre weld inspection as per SAIC-W-2005
o During weld inspection as per SAIC-W-2006
o Post weld inspection as per SAIC-W-2007
o Consumable receiving inspection as per SAIC-W-2010
o Consumable handling/storage as per SAIC-W-2032
o Raising RT requests, joint selections, assessment of RT and submission to client as per SAIC-W-2008.
Ma’aden Tie Inns Project. Ras ul Khair KSA
• Client: Dragados Gulf Construction Company & Ma’aden Sulphuric Acid Plant
• Designation: QC Engineer
• Major Area: Pipe line as per ASME B 31.3
• Responsibilities:
o Tie in procedure preparation and client approval
o WPS preparation as per Essential variables of QW 256 GTAW
o Weld joint preparation and fit up inspection
o Welding inspection
o Hydro test witness
Tuwairqi DRI Process Plant Pakistan
QC Engineer
o Execution Preparing and implementing project quality procedures, PQP, ITP etc.
o Reviewing of Shop Drawings, Customer Specifications and Procedures Coordinating with third party Inspectors & Clients to implement their Hold points.
o Marking and cutting of the material, ensuring cleanliness before fit-up, calibration of equipment at site.
o Pre welding, In process Welding & Post Welding inspection and follow up repairs and repair work on daily basis with construction.
o Working experience on range of material (range of P-Numbers)
o Welding Inspection of Piping and Steel Structure work according to the ASME sec. IX, AWS D1.1 and Visual Examination Procedure.
o Witnessing and Reviewing NDT activities DPT, MT, and RT and there reports.
o Review of NDE Reports, Hardness reports, PWHT reports/charts and RT Film Interpretation.
o Review of Welder Lots and verification of NDE completion as required by the Project Specifications and Standards.
o Preparation of Hydro / Pneumatic test packs/reports and Witnessing the Hydro/Pneumatic Test activities.
o Preparation of procedure and Inspection of valve hydro testing as per API 598 and ASME B16.34
o Valve Inspection and Testing as per API 598, AME B 16.34.
o Participating in weekly review meetings with the client
o Raising PAR, CAR & NCR and their control and follow up till closing.
o To ensure that welding is performed as per approved & recommended procedures & WPS.
o Handle the tasks of responding to welding technical queries and perform investigation of field welding related problems.
o Responsible for maintaining safe working environment for all personnel working on the job site.
o Quality Surveillance on site welding, pre-fabrication, painting and coating to monitor the welding activities as per Project specification and Welding Procedure specifications.
o Monitoring the proper implementation of the Quality Control policies and plans, as described in the Quality Control Manual.
o Coordinate with engineering and construction staff as well as with clients on quality requirements
o Inspection of surface preparation before painting/coating activities. Pre-blast checks:-Abrasive types, its storage, temperature & dew point. Post Blast Examination:-Surface cleanliness & Profile.
o Inspection of strength and seal welding of T-TS joints, expansion, cage assembly, insertion of tubes, marking and fabrication of baffles plates, for heat exchangers
o Preparation, Updating and Implementation of Quality management system and integrated management system documents, Method statements, SOPs and formats under ISO 9001-2008
.