Consulting and Project Management
ABS International
Total des années d'expérience :32 years, 11 Mois
1. ABS International March 2011 to present
An American company engaged in Consulting and Project Management services for commercial and residential establishments with its head office in Chicago, Illinois, U.S.A.
Address: P.O. Box 23269, Doha, Qatar
Worked as Mechanical Engineer (Private Beach Palace in Dukhan and Jordan Embassy)
Duties and responsibilities are as follow:
• Responsible for the design of HVAC and Plumbing System
• Responsible for the design review and site supervision of the following: o HVAC System
o Plumbing System
o Firefighting System
• Overseeing the quality of work of the main contractor
• Responsible in coordinating with the client and contractors through interactions and correspondence exchange
2. QDVC (Qatari Diar Vinci Construction) June 2009 to February 2011
A French multi-national company engaged in Design & Build Construction of car parks, pumping stations and other EPC projects with its head office in Paris, France
Address: P.O. Box 19389, Doha, Qatar
Worked as Mechanical Site Superintendent (Lusail Underground Car Parks and North Doha Pumping Station PS70 Projects)
Duties and responsibilities are as follow:
• Responsible for the design review and site erection of the following: o HVAC System
o Plumbing System
o Electrical System
• Overseeing the quality of work of subcontractors
• Organizes and maintains that any MEP activity is carefully planned and controlled in terms of time, budget and scope of work
• Responsible in coordinating with client/consultant and replying to their comments through correspondence exchange
• Project coordination with other disciplines
3. Hyundai Engineering & Construction Co. August 2007 to December 2008
A Korean multi-national company engaged in Engineering & Construction of power plants and substations with its head office in Seoul, South Korea
Address: P.O. Box 115389, Dubai, United Arab Emirates
Worked as Mechanical Design & Erection Engineer (400kV and 132kV Substations)
Duties and responsibilities are as follow:
• Responsible for the design review and site erection of the following: o HVAC System
o Fire Protection System
o Plumbing System
o Electric Overhead Crane System
o Diesel Generator System
• Organizes and maintains that any Mechanical activity is carefully planned and controlled in terms of time, budget and scope of work
• Responsible in coordinating with client/consultant and replying to their comments through correspondence exchange
• Responsible for equipment Factory Acceptance Test and Site Acceptance Test
• Subcontractor control and coordination
• Project coordination with other disciplines
4. Gulf Engineering & Trading Co. WLL March 2006 to March 2007
A Qatari-Lebanese company engaged in MEP contracting, with its head office in Doha, Qatar
Address: PO Box 22850, Doha, Qatar
Worked as Senior Mechanical Engineer (Al Qassar Tower West Bay)
Duties and responsibilities are as follow:
• Responsible for the design review of the following: o HVAC System
o Fire Protection System
o Plumbing System
• Responsible in coordinating with client/consultant and replying to their comments through correspondence exchange
• Responsible for the negotiation and procurement of various MEP equipment and materials.
• Project coordination with other disciplines
5. Totoku Philippines, Incorporated October 1999 to March 2006
A Japanese ISO-certified company engaged in the manufacture of Actuator for Hard Disk Drive (HDD) with its head office in Tokyo, Japan
Address: Carmelray Industrial Park II, Tulo, Calamba City, Laguna, Philippines
Worked as Engineering Supervisor (Process and Equipment)
Duties and responsibilities are as follow:
• Planning, designing and process improvement for the Manufacturing Department
• Responsible in the preparation, developing and improvement of Quality Manual, Work Procedures, Work Instructions and Checksheets
• Leading and participating in Third Party Surveillance Audit for ISO 9001:2000 and 14000
• Assigned as the Pollution Control Officer (PCO) of the company
• Leader in HVAC and Mechanical designing, erection, testing and commissioning
• Leader in the facilities management of the following equipment: o HVAC System
o De-ionized (DI) Water System
o Compressed Air System
o Firefighting System
o Potable and Domestic Piping System
o Cleanroom Control System
o Low and Medium Voltage System
6. NEC Toppan Circuit Solutions Philippines, Inc. December 1996 to June 1999
A Japanese ISO-certified company engaged in the manufacture of Multi-layered Printed Wiring Board (PWB), with its head office in Tokyo, Japan
Address: LISP II, Real, Calamba City, Laguna, Philippines
Worked as Engineer Foreman
Duties and responsibilities are as follow:
• Monitoring and supervision of the Photo-fabrication and Midway Inspection process of the PWB manufacturing
• In-charge in the operation and maintenance of Photo-fabrication process equipment
• Participating in Third Party Surveillance Audit for ISO 9000 and ISO 14001
7. Instafood Corporation of the Philippines August 1994 to April 1996
A Filipino-owned company engaged in the manufacture of Ready-to-Eat (RTE) foods using state-of-the-art Retort Sterilization Process.
Address: Canlubang Industrial Estate, Calamba City, Laguna, Philippines
Worked as Engineer
Duties and responsibilities are as follow:
• In-charge in the safe operation of the retort process equipment which include the following equipment: o Retort Sterilizing Machines
o Compressed Air System
o Steam Generation System
8. Arabian Maintenance & Operations Services Co. December 1991 to January 1994
A Saudi-owned company engaged in Building Operations and Maintenance Services for Universities and Sports Stadiums, with its head office in Riyadh, Kingdom of Saudi Arabia
Address: Riyadh, Kingdom of Saudi Arabia
Worked as Scheduler Supervisor (Al Imam University Project)
Duties and responsibilities are as follow:
• Monitoring, planning and scheduling activities of the Project's corrective maintenance and preventive maintenance program, that includes the following systems: o Chilled Water Plant (York Centrifugal Compression System)
o HVAC
o Fire Protection
o Sewage Water Treatment Plant
o Water Pumping Station
o Piping Networks
o Gas Turbine Standby Power Station
o Electrical System
9. Plastic Group Philippines, Incorporated May 1989 to December 1991
A Filipino-owned company engaged in the manufacture of Polyvinyl Chloride (PVC) Sheets used for commercial and household applications.
Address: Paciano Rizal, Calamba City, Laguna, Philippines
Worked as Mechanical Maintenance Engineer
Duties and responsibilities are as follow:
• Establishment of corrective and preventive maintenance and safety program in close coordination with manufacturing and engineering divisions
• Hands-on troubleshooting and preventive maintenance of manufacturing equipment
• Certified by the Ministry of Municipality & Urban Planning (State of Qatar) as Grade "A" Engineer • Registered Mechanical Engineer by the Professional Regulation Commission (Philippines) • Received Bachelor of Science in Mechanical Engineering in 1988 at Colegio de San Juan de Letran - Calamba