Senior Lead Commissioning Engineer
Siemens Östria
Total des années d'expérience :43 years, 8 Mois
As on previous jobs; Lead Commissioning Engineer HRSG,
Correcting if necessary at the last fases of the construction of the equipment and construction of the BOP and HRSG.
Attend at meetings and conferences about the planning, construction and start up preparations. Giving instructions to the client about handling the equipment.
Again for Siemens, commissioning on the newly constructed units; 4800 MW. Joining meetings. I had to handle 4 of the 8 HRSG´s: pressure testing, witness the chemical cleaning. Cleaning the system of debris and filling the system for ready to use and tests. Back to back. Supporting each other. Adjusting where necessary, inspecting internally and outside. Controlling the start-up.
Subsystems checking and even adjusting.
Paperwork; as documents for final installation and operation for handing over.
Working together with persons of all levels. Hearing and teaching.
Being the HRSG Supervisor for the HRSG built and ready to be taken in service after steam blow.
Running for the steam purity and synchronization on the steam turbine.
Getting the right procedure to start/up for the client by explaining what to do and were to look at during heating up a HRSG. Giving directions to get the right water quality for the HRSG.
Solving problems with control valves and other equipment to be able to hand over the equipment in total without disturbances.
Looking for problems with safety issues if applicable such as expansion at the different parts and lines.
Explaining the client how to handle.
Lead Engineer over the BOP & HRSG's IWPPlant. Responsabel for the correct installation of the total equipment. Having FATests of the bigger parts which are installed such as sea- cooling- and feed-water pumps.
Emergency generators (16MW).
Inspection of the installed HRSG's
Pressure testing of the systems en test running of the equipment parts and complete testing.
The total electrical power producing will be +/- 1600 MW with a water production of MG/day.
-Dealing with HSE as one of the priorities at all time.
-Attend FAT in different countries.
-Attend daily meetings related to erection issues, tests and start-ups with main contractor Hyundai Heavy Industry and associated sub-contractors.
-Responsible for assessing any construction issues and any Engineering design/variation changes as required to ensure the continuity from construction through to final startup and acceptance.
-Following the contractual rules to get a required utility build-up as should be. During issues trying to find the best solutions for the optimal position.
-
At Progressive Global Energy working for Siemens NL.
Function : Commissioning Engineer for gas-turbine driven gas-compressor units.
Description : Commissioning at a gas plant, two SGT-400 units in the Sahara of Algeria for the customer; JGC Sonatrach.
Instructing employees and controlling the tests and start-up of the units. Each unit boosting from 35 bar up to 75 bar, approximately 6.5 Milj. Nm3 gas a day.
DEC-GDF Suez), in the Kingdom of Saudi Arabia (remote site)
Function : Lead Commissioning Engineer for 7 HRSG's.
Description : At the Combined Cycle Power Plant (CCPP) with a total electrical power of 1730 MW working as Lead Commissioning Engineer over the HRSG's at the end of the Construction phase, including chemical cleaning, full system testing and the start-up. Representing DEC (Project Management Company PMC), customer, future owner and operator.
Duties include:
-Dealing with HSE as one of the priorities at all time.
-Attend daily meetings related to erection issues, tests and start-ups with main contractor Hyundai and associated sub-contractors.
-Responsible for assessing any construction issues and any Engineering design/variation changes as required to ensure the continuity from construction through to final start up and acceptance.
-Inspection of finished components, with the approval. At this stage all of the components have to be checked and thoroughly inspected for compliance, including the construction of the HRSG's, and all their sub-systems interface connections, supports etc. This task is completed by reviewing design drawings, ISO's and recommendations of the equipment supplier and will be rectified if necessary.
-Witnessing pressure tests, start-up of the HRSG's having checked all the necessary components and cleaning by steam blow of the internal boilers components, the steam lines towards the steam turbine and the air cooled steam condenser.
- Reporting to the Commissioning manager, to report non-conformances in order to prevent errors and omissions and or damage during construction and or commissioning, as the project progresses'
- Attend daily and weekly commissioning meetings related to commissioning work before plant start-up; for steam-blow and -purity run and more testing.
Primarily dealing with, regulating valves, strainers, pumps, blowers, gas manifolds, pipework pressure vessels, boosters, etc.
Similar project engineering tasks are mentioned below and are done with HSE, as a primary action, with Risk analysis undertaken with regards to work, at all times, with work permits, closed spaces procedures and ventilation requirements in order to prevent accidents and damage, to both people and equipment.
Shell; Dutch oil company, crew provided for Shell at; NAM location Schoonebeek
For domestic and international assignments.
Commissioning of HRSG's at the end of the Construction phase, cleaning, pressure testing and including the start-up and full system testing. Representing the HRSG supplier (NEM) in order to hand over the HRSG to the client at the end of the construction and commissioning phase till PCOD.
Duties include:
-Attend meetings related to construction and installing issues.
-Responsible for assessing any construction issues and any Engineering design changes that are required to ensure the continuity from construction through to final start up.
-Inspection of finished components, with the final approval by the client. At this stage all of the components have to be checked, including the construction of the boiler itself, with all its connections, supports etc. This task is completed by reviewing all design drawings, ISO's and recommendations of the equipment supplier and NEM.
-Witnessing the pressure test, cleaning of the internal boiler parts and start-up of the power plant after having checked all the necessary components.
-Responsible for handling all communications between the client and Main office.
Function : Commissioning Manager for HRSG's (NEM office Hengelo)
Co-ordination of the practical issues of the new project, having to prepare for construction, co-ordinating position planning for cranes, equipment, spare parts etc. Discussing the situation with SHELL management.
Typical tasks include:
-Organizing meetings with the construction department (for construction issues), subcontractors and team members to coordinate the direction and development of the project.
-Daily contact with the site manager, TFA's, sub- and main-contractors, as well as the client to ensure that budgets are maintained within the set parameters.
-Monitor back charge work by the contractor / customer on a daily basis to track and control costs.
of the Technical Department and acting as company representative at the biomass power plant in Emlichheim, Germany.
Description:
Working alongside the factory manager and the head of the electrical department (the plant controllers) to manage a 70 MW thermic and 23 MW electrical “green energy” plant. The plant utilized a Foster Wheeler boiler and a Skoda steam turbine.
-Expertise in large scale boilers, mainly pulverised fuels boilers and/or Circulating Fluidised Bed boiler (FW);
-Responsible for resolving both technical and personal issues raised by site personnel. With the aim to ensure excellent plant performance as well as good collaboration and team spirit with the plant personnel.
-Keeping the plant manager informed on all plant issues (current and to be expected) that can affect performance.
-Responsible for all site safety issues, both for equipment operation and personnel.
-Responsible for all Maintenance and repair activities, coordinating all activities with the plant manager and chief electrician. This included scheduling of maintenance, repair and cleaning (monitoring subcontractor services / personnel, parts, equipment etc.) activities.
-Managing troubleshooting including coordinating and directing personnel to resolve any issues.
Service power plant, for business park premises providing various types of energy.
Function : Engineer 24/7 duty on a 5 shift rotation.
Description:
Taking shift hand over from colleagues, by discussing on going daily matters, incidents and any issues that could cause plant problems.
-Reviewing different types of highly critical, precision machinery for the supply of; heat for water /steam production, cooling systems (-water and air), potable water (from the well to drinking water) and condensate system. - Controlling Heavy duty gas-turbines (GE frame 5) for heat for the steam and electrical power for at site and the national grid.
-Also working with and regulating air systems (6 and 9 bar).
-Taking care of waste water at the purification water plant with anaerobic and aerobe This includes the sulphate disposal- and the biogas-equipment.
-Working with different kinds and types of chemicals also for purification for boiler water.
-Incidental repair and service work, including equipment change out and spare parts.
-Design, modify and implement control loops (mechanical and electrical) for safety, for security and fire extinguishing systems.
-To accompany vendors with our technical personnel in respect of repair and maintenance, giving them instructions and securing different equipment or machinery for repair or maintenance (to put back in duty again).
Gasturbine training, LM 5000, Thomassen Intern. Rheden.
logical diagrams, AKZO Nobel, Ede.
PLC understanding, AKZO, Ede.
Measurement and control technique, AKZO en ROVC, Ede.
Gasturbine training, Heavy Deauty MS-3, 5, 6, 9
v/h Akzo Nobel) Ede.
Function : Engineer 24/7 duty on a 5 shifts Rotation.
Description:
Taking shift hand over from colleagues, discussing on going daily matters, incidents and any issues that could cause plant problems.
-Reviewing different types of highly critical, precision machinery for the supply of; heat for water /steam production, cooling systems (-water and air), potable water (from the well to drinking water) and condensate system. Also working with and regulating air systems.
-Nominate the quantity of gas and Electricity at the energy company for the next day to the network and the APX.
-Monitoring the energy process flows and process conditions, primarily on condition monitoring computer screens, considering safety and environmental issues.
-Taking care of a constant quality control, with a diverse range of liquids and gasses.
-Start and stopping the steam boilers and turbines (also gas turbines LM5000 Type).
-Regenerate demineralization and condensate cleaning equipment. Also de-iron equipment.
Refer to previous company also.
Stichting Working together for Safety, at Leidschendam.
Ultrasonic material research, TNO Apeldoorn.
WKK) SEP, Martech, Apeldoorn.
Improving the foundry quality.
In this period I worked for multiple shipping companies as a Marine Engineer on board cargo ships of varying types.
High school for naval engineering (M.S.v.S.
Industrial & Biologic Waste water process and equipment, BRCC, Groningen.
Management Total Safety (MTS) course, Akzo Nobel, Ede.
Jan to Feb. 1998 : Company's instruction medium voltage switching, KEMA, Arnhem.
March 20011 : Full-VCA; Safety for Operational Supervisors, IVM Coevorden NL.
: First aid, Red Cross Emlichheim Dld.
For domestic and international assignments. CCPP.
Commissioning of HRSG's at the end of the Construction phase, including the start-up and full system testing. Representing Shell, as their representative to NAM, being the customer, future owner and operator of the facility.
Duties including
: The Lead CSU Engineer provides a key role in the commissioning and handover of the new plant from the project phase to the asset operations. The primary objective is to ensure that the project delivers on its original promises, in terms of production, ramp-up, availability, and that it is fully ready for handover to the Operating phase.
The Handover Process is divided into three main steps: (i) Commissioning (ii) Preparation for Start Up and (iii) Start Up and Plant Performance Test till handing over.
Commissioning will be:
-Project Delivery
-Safe and cost effective commissioning
-Controlled ramp-up to Steady State Operations
-Total Reliability & Technical Integrity of the operating facilities
-Asset management that is fully prepared to take the project into the operational phase of its life all in line with the related Standards & Global Processes.
Other duties are similar to the duties mentioned below.
For domestic and international assignments.
Commissioning of HRSG's at the end of the Construction phase, including the start up and full system testing. Representing the boiler supplier (NEM) in order to hand over the boiler to the client at the end of the construction and commissioning phase.
Duties include:
-Attend meetings related to construction and installing issues.
-Responsible for assessing any construction issues and any Engineering design changes that are required to ensure the continuity from construction through to final start up.
-Inspection of finished components, with the final approval by the client. At this stage all of the components have to be checked, including the construction of the boiler itself, with all its connections, supports etc. This task is completed by reviewing all design drawings, ISO's and recommendations of the equipment supplier and NEM.
-Witnessing the pressure test, cleaning of the internal boiler parts and startup of the power plant after having checked all the necessary components.
-Responsible for handling all communications between the client and Main office.
Function :
All the facets for using and making energy. Engines, pumps, generators, water, electricity, oil / chem. , gas compressors, gas turbines (LM TM or heavy duty) What ever you can think of to be used or handled, in all kinds of ways and matters. Welding , soldering (Cooling plant). Now doing construction, commissioning and start-up of utilities and main equipment (BOP & HRSG´s ) at power plants. Advising on repair works at HRSG´s. BOP & HRSG lead engineer, working with people ...