Lead Engineer (Control & Instrumentation)
First National Operation & Maintenance - Nomac
Total years of experience :12 years, 1 Months
• Lead I&C section of 1500MW CCPP and coordinated with EPC contractor and its subcontractors for timely completion of construction & commissioning activities while
ensuring quality compliance as per EPC contract.
• Lead the cybersecurity implementation project (CSI) for the implementation of the cyber
security system of the power plant with respect to the OTS (Owner technical
specifications) and to achieve the maximum safety of the power plant.
• Involved in the HAZOP, SAFOP, SIL and RAM study of the power plant with the OEM to
ensure the maximum reliability and safety of the equipment.
• Designed review of the Instrument & Control Systems of entire power plant with respect
to OTS technical specifications.
• 3-D Review of the entire power plant to identify the gaps in the design.
• To prepare the monthly ROS (Reliability of supply) report and to review ROS check list.
• Provided continuous support to EPC contractor on daily basis for construction and
commissioning activities and site issues.
• Responsible to attend/review the FAT reports of all I&C critical equipment’s.
• Proof reading of all Project Documents released by EPC and liaised with all disciplines to
ensure contractual compliance.
• Conducted pre-commissioning checks, power-up, and functional checks
• Developed I&C documentation required for commissioning and O&M phase
• Performed the troubleshooting and proposed modification on Boilers & BOP control
system- Emerson Ovation DCS
• Troubleshooting and implementing the modification of Turbine control system - Siemens
T3000 DCS
• Coordinating with operations team during start-ups and shutdowns for reliable operations.
• Troubleshooting of Soot blower Management System - Allen Bradley ControlLogix PLC
• To maintain the critical backups of plant control systems and standalone PLC in
emergency.
• To prepare the critical asset register (CAR) of the plant and to identify the single point of
failure to upsurge the plant’s reliability.
• Ensured timely O&M readiness from a Systems & Maintenance facilities point of view.
• Prepared CAPEX/OPEX Budget proposals.
• Developed a CMMS (Oracle based) preventive maintenance plan for I&C systems.
• Followed up & resolved punch list & warranty related issues with OEM & EPC Contractor.
• Conducted Alarm Management for DCS targeting best practices.
• Adopted various strategies and improvement projects to eradicate I&C single point
failures.
• Identify workshop test equipment, tools and setup of workshop to ensure O&M readiness.
• As the key Representative from E&I team; coordinated with the IT department for
successful implementation of ERP asset management and Inventory management
modules
• Lead I&C section of 900MW CCPP (BQPS-III) and coordinated with EPC contractor and
its sub-contractors for timely completion of construction & commissioning activities while
ensuring quality compliance as per EPC contract.
• Designed, Installed, Commissioned and Maintained the Instrument & Control Systems.
• Provided continuous support to EPC contractor on daily basis for construction and
commissioning activities and site issues.
• Proof reading of all Project Documents released by EPC and liaised with all disciplines to
ensure contractual compliance.
• Conducted pre-commissioning checks, power-up, and functional checks
• Developed I&C documentation required for commissioning and O&M phase.
• Prepared project plans for construction & commissioning phases.
• Coordinated with EPC team for the designing and implementation of OPGW system.
Executed the up-gradation of Siemens DCS T3000-Cue of Rousch power plant (CCPP)
and performed commissioning tasks
• Troubleshoot and implemented the modification of Siemens Steam Turbines control
system - Siemens T3000 DCS
• Troubleshooting of the PLC/HMI and control circuits in minimum time to reduce the down
time of equipment- DCS T3000 and standalone PLCs
NOMAC | Public
• Responsible for planning, scheduling, and executing the shutdown and major overhaul
maintenance activities.
• Executed the upgradations of various standalone and PLC and HMI systems.
• Performed Root Cause Analysis (RCA) of critical equipment failures and took
precautionary measures to prevent recurrence.
• To establish priorities, making improvements on work methods and participated in
evaluating modification proposals, failure analysis and unscheduled shutdowns.
• Supervised all required calibrations of Gas Turbines and Steam Turbine instruments.
• Prepared the annual departmental budget. Maintained the minimum quantity of spares in
store as contingency plan.
• Evaluated equipment performance problems and suggested modifications by using latest
technology to reduce the overall maintenance cost.
• Interfacing and coordination with other sections in troubleshooting equipment problems
during maintenance activities
Got distinction in power plant subject (97/100)