IP Transport Technical Project Manager
Alcatel-Lucent
Total years of experience :19 years, 10 Months
RESPONSABILITIES:
+ Prime technical interface with the customer. Understands the customers' strategy and manages their technical expectations.
+ Understands the customers' strategy and manages their technical expectations.
+ Responsible to propose an engineering plan of execution, following clear milestones by Customer Delivery.
+ Identifies engineering resource requirements into resource managers and PM.
+ Defines integration and testing strategy & coordinates engineering teams into it.
+ Identifies deliverables under engineering responsibility. Plans & executes these deliverables with engineering team taking care of cost, quality & milestones.
+ Identifies internal and external technical risks impacting the project (ARs, ONs/Alerts/Announcements, product evolution) and proposes & implements risk mitigation plan.
+ Identifies and analyses customer needs and advises them on solution / technology / products that are the best fit and supports technically on up-scopes development.
+ Manages handover to other technical teams (CTS, NI, NPI, even FF)
+ Supports Solution Architects, during presales phase, to insure feasibility and delivery of the solution
PROJECTS:
+ Inter-Subsidiaries NG-DWDM project: Mauritania Part - Mauritel - Maroc Telecom Group
+ Carrier Ethernet Transport Extension-2015 : NG-DWDM Part - MédiTelecom - Morocco
+ G-Cloud an e-Gov project - Burkina Faso
+ 10G Extension of Fes-Meknes Lang-haul Ring - Maroc Telecom Morocco
+ 100G Extension of Fes-Mekens Lang-Haul & Metro Rings in Fes, Meknes, Rabat & Casablanca
END CUSTOMER: Imouraren S.A. (Joint Venture between AREVA & Niger Government)
PRIME CONTRACTOR: TSU Projects
PROJECT: Extension of LAN/Telephony Network on Imouraren Mining Area and
RESPONSABILITIES:
+ Responsible of design and engineering documents delivery as per customer specifications (High Level Design, Block Diagram, Wiring Diagrams…)
+ Technical interface with CCTV (Gutebruck) supplier and with internal engineering team (ALU Enterprise/GNEIC)
+ Technical validation of deliverables prepared by Gutebruck or GNEIC.
From February 2013: Integration Expert for NPCC Bab Thamma-G & Habshan-2 project
o Customer: National Petroleum Construction Company (NPCC) Prime Contractor awarded by Abu Dhabi Company for Onshore Oil Operations (ADCO)
o Project: Bab Thamama-G and Habshan-2 1.8 MMBOPD Phase-1 Development Project - Integration of Telecommunication System
o Responsibilities: + Act as main interface for telecom commissioning & integration work.
+ Plan and supervise commissioning & integration of telecom systems (ACS, Meteorological, CCTV, PAGA, Wimax, UHF, LAN and SDH/PDH)
+ Coordination for all site activities with Customer, Contractor and 3rd Party Vendors
+ Reporting to project management team (work progress, installation issues, missing hardware…)
+ Installation verification and pre-commissioning check.
+ Commissioning and Acceptance Test for Wimax network (12 Base Stations & 106 CPE from Redline)
+ Commissioning of Ethernet switches deployed for Wimax (ALU OmniSwitches and RuggedCom switches)
Training & Certifications:
RCSP-RDL3000 & AN80i Certified : RCID# RSCP-RDL3000-AN80i-130125-ALU-3302
o Customer: TSU (Prime Contractor) was awarded by Imouraren SA (End customer, a Joint Venture between AREVA & Niger Government)
o Project: Extension of TETRA Network on Imouraren Mining Area
o Responsibilities: + Preparation of engineering documents as per customer specifications (High Level Design, Block Diagram, Wiring Diagrams…)
+ Technical interface with TETRA (Rohill) supplier and with internal engineering team (GNEIC)
+ Technical validation of deliverables prepared by Rohill or GNEIC (TETRA & Microwave).
o Customer: National Petroleum Construction Company (NPCC) Prime Contractor awarded by Abu Dhabi Company for Onshore Oil Operations (ADCO)
o Project: Bab Thamama-G and Habshan-2 1.8 MMBOPD Phase-1 Development Project - Integration of Telecommunication System
o Responsibilities: + Technical interface with 3rd party suppliers
+ Technical validation of solution, products and deliverables provided by 3rd party vendors (Redline, Motorola via Safeer, RuggedCom, ALU Enterprise) with respect to customer requirements.
+ Provide engineering documents as per customer specifications (BoM, Data Sheets, Tag Numbering, Cable Schedule, Alarm List, Site Acceptance Test Procedure…)
+ Validation of CAD drawings.
B&P Support to Bid team on ONCF-LGV offer.
o Customer: ONCF the National Railway Operator in Morocco
o Opportunity: Signalling, Telecommunication & Control Centre for the new High Speed Train Line (LGV) between Casablanca & Tanger.
o Responsibilities: + Coordination with bid team and SMEs.
+ Preparing cost notes for acceptances and tests activities for different subsystem (SDH, LAN/WAN, Telephony, Railway Telephony, CCTV, ACS, Industrial Switches)
o Customer: MediTelecom the second Multiservice provider in Morocco
o Project: Implementation of the first Carrier Ethernet Transport Network (WDM + IP/MPLS) in Casablanca City and Migration of pilot sites (3G Node-B, Wimax BS and Business Customers)
o Responsibilities: + Prime interface with customer for all technical aspects
+ Responsible of delivering all design, integration & migration deliverables (OFC Report, HLD, LLD, ATP, Migration Strategy, MOP…) with respect to planning & cost.
+ Coordination with project team (PM, Architects/Designers, TPMs, Integrators & Rollout team)
o Achievements: + Migration Execution Service Up scope (from 1 pilot site per techno to all Casablanca 3G network)
+ Outstanding CLI score in 2011: 8.25 (Targeted score was 7.50)
Tasks & Responsibilities:
Act as focal point to deliver Last Mile Access to Business customer (Wimax, Microwave & Optical Access)
Plan and follow up site survey, installation, provisioning and acceptance test activities
Coordination between Suppliers, Subcontractors, Pre-sales team, Provisioning team and End Customer to deliver last mile access in time, within budget and ensure customer satisfaction.
Provide Backhaul transmission for Internal Clients (Radio Department, IP Backbone Department)
Prepare RFQ to select subcontractors
Prepare RFQ to purchase Access & Transmission solutions
o Hybrid microwave links for 2G, 3G and Wimax BS and Business customers
o Native IP microwave links to ensure IP Backbone expansion
o SDH ADM to built Optical Local Loops
o Optical CPE to provide optical access to Business customers
Technical evaluation of vendor/subcontractor proposal
Project Manager of many microwave projects (Network Design, RF Planning, DCN Design, Roll-out, Commissioning, Acceptance Tests, Services provisioning…)
o Providing multi-service access to Business customer
o Backhauling of Wimax Base Stations
o Expansion of Meditel MPLS Backbone
Prepare offers to Business customers (Solution Architecture, Backhauling cost, Implementation time plan) and working closely with pre-sales engineer to answer clients RFQ (Banks, Universities, Government, Companies…)
Training & Certifications:
RCSE-RedMAX Certified : RCID# RC-3-100212-MD-3101
RCSP-RedCONNEX RedACCESS Certified : RCID# BWI-2-091016-MT-2980
RCSP-RedMAX Certified : RCID# RC-2-090206-MT-2802
Training on Microwave products: Ericsson; Nera, NEC, Huawei and Redline
Project: « Building a nationwide TETRA network for secure mobile communications »
Tasks & Responsibilities:
Validation of engineering studies (Radio Coverage, Cell Planning, Network Design)
Review/comment on Vendor Acceptance Test procedures (FAT and SAT)
Supervision of site acquisition & site installation
Plan and supervise installation and commissioning of telecom systems
Participate in Factory Acceptance Tests
Manage and conduct Site Acceptance Tests
Generate punch-lists and follow up with vendor for clearance
Operation and Maintenance of Rohde & Schwarz TETRA platform : ACCESSNET-T (Base Stations, Switching & Controller Node, PABX Gateway, Switches, Routers, Servers, Network Management DB, Subscriber Management DB)
Operation and Maintenance of the transmission network: Codan DMR-8800 Series
Network Management (Fault Management, Performance Management and Security Management)
Subscriber Management (Creating groups, Creating user profiles, Service provisioning)
Lead of a team of technicians for O&M of the network
Provide knowledge transfer and training session to technicians (RF, Networking, Security, TETRA, Microwave…)
Trainings:
« Introduction to TETRA and the ACCESSNET-T platform » - Rohde & Schwarz
« Integration, Maintenance & Troubleshooting of the ACCESSNET-T network » - Rohde & Schwarz Service and Training Centre - Köln, Germany
« Maintenance & Troubleshooting of Codan Microwave Equipments DMR 8800 » - Codan
« Security on TETRA Network: Authentication & Data Encryption » - Sepura
Project: « Implementation of a Configuration Management Suit to handle Ericsson Radio features »
Study of Ericsson BSS (Radio Parameters and Ericsson RBS features)
Analysis of the Radio Optimisation Process
Design & Implementation of a Radio Data Base to archive all radio parameters and configuration changes on the BSS using Oracle 8i
Development of a Java based script to track radio configuration changes on the Ericsson BSS.
Development of O3_Ericsson (Optimisation Of Optimisation Process), a Configuration Management Tool which provide fast and user friendly access to all Radio parameters and track configuration changes on the network
Plateforms: Ericsson OSS, Ericsson CNAI Interface, Unix Solaris, ORACLE 8i, JDBC, JBuilder.