Hyacinth Sharad Aranha

Key Responsibilities:

 Bid for Oil/Gas/PW Technology process packages.

 Manage the bidding team to deliver accurate, winning bids with optimal process offering.

 Develop standardization to reduce bidding time and bid more opportunities.

Key Responsibilities:

 Best employee of the year 2022-23. Managing a team of 3 senior process engineers. Bidding for Early Production Facilities, DBOOT Compression stations / Gas Processing Facilities / Oil Processing Trains etc.

 Green H2 utilizing solar & alkaline electrolyser technology FEED for ACME India project in Oman for Green H2 and Green NH3 greenfield project, still in FEED stage. CCUS of flare gas in Nigerian OML’s. Have a good feel for PEM / AEM technology as well.

 Actively bidding proposals, ITT Review, sizing, estimation, PFD/P&ID/Line Sizing, bid preparation etc. Working with and helping other members of the team.

 Responsible for the execution of proposals on a global scale in co-ordination with Regional Product Managers.

 Bids include EPF’s, MOPU’s, LOM etc. Responsible for ensuring bid compliance and accurate costing.

 Checking the process design of EPF’s and sizing prepared by process engineers.  Client meetings, Technical Review Meetings, Bid Clarification Meetings etc.

 Develop process engineers, train and mentor them.

 Liaise with vendors to get lowest offers on bids.

 Developing and enhancing design for Well Unloading Technology using gas lift enhance oil recovery for individual wells in Algeria to increase production from depleted wells.

 Trouble shooting of offshore HOEC B6 Platform which was designed for oil but is depleting faster than normal, issues of wax precipitation is causing severe operational issues. Solved issues with TEG Gas Dehydration issue which was not able to achieve spec for over 6 months of operation, carried out RCA to analyse the problem, studied operational trend data, ran simulation to check rated performance and was able to point out the problems which has saved daily Methanol injection and now the unit is on spec.

 Complete process design for bidding Total Ratawi EGE Project Iraq.

Key Responsibilities:

 Lead detail process design of EPF’s. Complete process design & led team of 17 discipline engineers for 3 x 850usgpm Amine CO2 removal + 2 x 20MW Hot Oil Pkgs. KOC JPF4 Kuwait, complete gas train - 25usgpm TEG Gas Dehydration Unit, 1200usgpm H2S & Mercaptan removal with MDEA+ThyGly Amine Unit, 6MW Mechanical Refrigeration Unit, 2x120 Tonn Per Day Sulfur Recovery Unit. Nigeria Flare Gas Monetization by Flare Gas to H2 working with technology licensors like Topsoe, Johnson Mathey etc, Flare Gas to Green Fuels with licensors like Verde / Verdis / for Methanol, DME, Gasoline, Diesel. Have worked on a proposal to ADNOC for blue Ammonia working with licensors like Topsoe / ThyssenKrupp. Nigeria - Brass Fertilizer proposal for natural gas to methanol.













An expect on Excel-Access-Hysys/Unisim/AspenPlus-VBA to quickly run sensitivity runs that will take weeks to input, have written code to complete this is few hours.

Won 58 Mil $ KOC JPF4 with SPETCO for Gas Package (1200 usgpm Amine GSU + 30 usgpm TEG GDU + 12 MW Refrigeration Pkgs). Will be leading its execution in 2022.

Execution 3 Trains of 850 USGPM Amine Sweetening Project for Pakistan. Carried out complete process engineering, flare network sizing, represented company for HAZOP. Was key to winning this project, besides providing all technology and knowhow inhouse. Design of 2x20MW Hot Oil Packages.

Lead Process on 7 usgpm TEG GDU for Total ADNOC Abu Dhabi, complete process design. Received coustomer ADNOC/Total appreciation letter for support provided during troubleshooting of the TEG GDU unit due to extreme turndown conditions to provide flexibility in processing gas under extreme turndown.

LPG MerOX Desulphurisation Unit, core design lead on process along with Technology partner, learned the process and provided optimisations besides being pivotal to size up all the equipment along with costing.

KOC JPF 4, currently independently working on SCOT unit, have developed inhouse sizing of all equipment on the unit, sizing of exchangers, reactors etc and evaluating technology partners by comparing models built. 





Extensively worked on sulfur recovery units working with Comprimo / Shell / Le Gaz Integral / Axens. Have simulated the complete process in HYSYS Sulsim to model Claus Process with TGTU for 99.99% recovery, the partial oxidation and direct oxidation process as well as Axens Sub-Dewpoint process. Further I’ve also modelled the Caustic Wash system in the Axens process to remove SO2 from tail gas to achieve 99.93% recovery using OLI. I have extensive experience in sensitivity analysis of the process, sizing of all reactors based on their space velocities and specialized heat exchangers. Finally granulation & drying of sulfur, working with reputed suppliers.

Complete design of 10 MMSCFD flare gas monetization project to convert natural heavy flare gas to diesel and gasoline using Verdis, Verde, Compact GTL, Grey Rock Proprietary Technologies. Reworked the complete simulation of Partial Oxidation to SynGas and the Fischer Tropsch reactions to liquids in Aspen HYSYS, all reactions were modelled and input by me to mirror vendor technology. Following this, every equipment was sized and costed up to give a consolidated price for the project with a ROI of 1.5 years.

Used Biowin software to simulate ETP to simulate complete primary / secondary / tertiary treatment of chemical waste water.

Deputy Proposal Manager Senior Process Engineer Process Engineer -

Key Responsibilities:

June 1st, 2018 - April 18th, 2019 (Promoted) June 2017 - June 2018 (Promoted) November 2014 - June 2017

 Working on large EPF’s, Gas Plant design for bidding and mentoring junior process

engineers.

 Mange a team of 4 process engineers of which two are senior engineers to check

process designs & validate costings prepared.

 Support Projects & Engineering with process tasks

  



Working on large EPF’s, Gas Plant design for bidding and mentoring junior process engineers.

Commissioning of TEG GDU for Saudi Aramco NAUG Project.

Lead Process Engineer for KOC - EWTIP project worth 17 MMUSD KOC project in produced water treatment, did complete IGF Pkg design and detailed process design.

Lead Process Engineer for ONGC Karaikal Rental GDU project, complete design of Hydrocarbon/Water Dew Point unit for 7 Gas Gathering locations and complete design of 2 off MEG regeneration units. 









KOC Jurassic Firm Bid - Lead Process Design Engineer for the complete Gas Process Train - Hg Removal / Gas Dehydration / Gas Sweetening.

Iraq Mansuriya Firm Bid - Lead Process Design Engineer for the complete Gas / Produced Water Design - Hg Removal / Gas Dehydration / Gas Sweetening / NGL Fractionation & LPG Recovery / Turbo Expander / Export Compression / Claus Sulfur Recovery / PWT Sour Water Stripper / IGF / NSF.

Petrobel EPF Egypt - Lead Process Design Engineer Water / Hydrocarbon Dewpoint Unit, Propane Refrigeration & JT Valve, MEG Injection & Regeneration, Elevated Pipe Flare Design and Flare network Design.

Iran Refinery Firm Bid - Hg/As Removal, Mol Sieve Gas Dehydration, Amine Gas Sweetening 800 usgpm unit.

ADCO - Petrofac / Tecnimont Firm Bids - Lead Process Engineer for TEG GDU’s requiring high flowrates and purties to achieve the required dehydration unique to the company’s history.

Key Responsibilities:

 Safety, environmental and operability reviews (HAZOP)  Total Moho Nord Project - GDU Unit - 3 MMUSD was assistant process engineer  CAFC Algeria - Sonatrach - GDU Unit - 4 MMUSD was process engineer  Punta Del Tigre Uruguay - FGSS - 3.6 MMUSD Project was process engineer  Firm Bid for Total Moho Nord Project - Flare Gas Recovery Package.

 Independently Developed Forced Draft Indirect Water Bath Heater Design and

bagged 2 big Fuel Gas Conditioning Packages in Algeria for which we designed

and built 6 nos of 8.5 MW Gas Heaters. Expanded the design for Natural Draft

Water Bath Heaters.

Key Responsibilities:

 Standardization of Glycol design for Standard Units - PFD’s, P&ID’s and

Equipment Sizing.

 Review tender package and bid specifications.

 Process Design of Glycol, Amine on Pro-Max simulator and Paques-Thiopaq on

proprietary software.    

Develop Heat & Material Balances.

Prepare, mark-up P&ID’s, PFD’s.

Prepare Data-Sheets for Vendor Quotes.

Pressure vessel design of Contactor, Filters, Flash Tank, Separators, and Scrubbers.

 Gas and Liquid line sizing, PRV, PSE sizing.

 Interact with Vendors, Estimators, Drafters to prepare proposal.

 Prepare layout of the skids with piping.

 Prepare Technical & Commercial Proposal


 Working on HYSYS to simulate Gas Processing- removal of CO2 from sour natural

gas.

 Carry out FEED engineering on new proposals  Carried out a future cost/feasibility study Petronas Bergading Project  Proposal preparation and estimation  Sizing and estimation of; Separators, Dehydrators, Filters, Membranes  Relief Valve sizing based on API 520 & 521  Good working knowledge of ASME Sect. VIII Div. I for Pressure Vessels  Good knowledge of P&ID’s, PFD’s, Pipe Spool Drawings, Welding procedures,

Layout  Participated in project kick off meetings, drawing reviews, client meetings  Co-ordinate on regular basis with Mechanical Drafting, Project Engineering,

Estimating groups in preparation of Proposals  Hand on experience with welding procedures  Was part of the ‘Bouri Libya Membrane Project’ worth 40 Million USD. Prepared

line list, PSV/PRV sizes for the skid package.

 Was part of ‘Tangga Barat Membrane Project’ for Petronas Malaysia, project value

of 110 Million USD. Carried out HYSYS simulations, prepares start-up shut down

manual, PSV/PRV sizing, line list, vessel sizing of separators for membrane skid.  Carried out in-depth study on HYSYS for CO2 separation from natural gas using

CYNARA membranes for Petrobras giant IARA and GUARA fields. These were

incorporated into the FPSO’s bids by Petrobras.

 Preparation of Proposals for Electrostatic Desalters and Dehydrators  Hands on experience with R&D in Tulsa, OK, on operation of Electrostatic Oil

Treaters  Sizing of; Electrostatic Desalters, Treaters and Separators  Good working knowledge of ASME Sect. VIII Div. I for Pressure Vessels  Good knowledge of P&ID’s, PFD’s, Pipe Spool Drawings, QA/QC Inspection.

 Participated in several project kick off meetings, drawing reviews, client meetings  Co-ordinate on regular basis with Mechanical Drafting, Project Engineering,

Estimating goups in preparation of Proposals  Conducted vessel inspection on several jobs in Natco’s Fabrication Shop, Function

Acceptance Testing on Heater Treaters  Extensive travel to various Natco locations involving Oilfield sites in Colorado,

manufacturing units in Louisiana and Electra Texas, and R&D Lab in Tulsa

Oklahoma

Key Responsibilities:

 Territory incharge of South India, develop market for speciality oils in India.

 Meet end clients (auto, construction, chemical, metallurgical, electronic),

understand their manufacturing processes, prepare a cost analysis for savings

achievable based on change to speciality products. My work achieved exclusive

contracts with L&T-ECC all India in 3 months for several products.

 Survey the Southern Markets for Synthetic Oil usage, current brand used, and

costs for Gear Boxes in Rubber and Tyre Industries. Won several exclusive

contracts.

 Involved in planning of detail plant studies in Food, Construction, Automotive and

Cement Industries.

 Awarded cash reward and certificate in appreciation of Quality of Work Performed.

  



Planning on production schedules and interacting with consultants and inspection engineers before dispatch of Reactors (KK Engineers) and Valves.

Interact with clients for orders and ensure production schedules are met.

Bidding for tenders, liaison with Government Companies for upcoming projects