ابراهيم محمد ابراهيم الخطيب, Bridge Engineer

ابراهيم محمد ابراهيم الخطيب

Bridge Engineer

Greater Amman Municipality

البلد
الأردن - عمان
التعليم
بكالوريوس, Highway and Bridge Engineering - Civil Engineering
الخبرات
11 years, 5 أشهر

مشاركة سيرتي الذاتية

حظر المستخدم


الخبرة العملية

مجموع سنوات الخبرة :11 years, 5 أشهر

Bridge Engineer في Greater Amman Municipality
  • الأردن - عمان
  • أشغل هذه الوظيفة منذ أكتوبر 2018
supervisor engineer في Mostaqbal Engineering & Environmental Consultants
  • الأردن - عمان
  • نوفمبر 2017 إلى سبتمبر 2018

supervisor engineer at Mostaqbal Engineering & Environmental Consultants on Jordan School Expansion project - Phase 2 - Package 1 - Manshiyet Hussban Primary Boys School
This project funded by United States Agency For International Development (USAID) with cost 500, 815.00 JOD

Site engineer, Bridge engineer, technical office engineer في Saudi Pan Kingdom - SAPAC
  • المملكة العربية السعودية - مكة المكرمة
  • أغسطس 2012 إلى مايو 2017

1-Bridge Engineer for the 4th Ring Road Project from Al-Madinah Road to Old Makkah- Jeddah Road.
2-Quantity Surveyor.
3-Project Planner.
4-Technical Office Engineer.
5-Site Engineer.
6-Supervisor for all subcontractors in the 4th Ring Road Project from Al-Madinah Road to Old Makkah- Jeddah Road, such as:
a- FREYSSINET SAUDI ARABIA (French Company): MSE walls (Mechanically Stabilized Earth) - gravity structures consisting of a composite of granular back-fill and layers of high-tenacity, synthetic strip connected to precast concrete facing panels. This system used extensively as retaining walls for highways, seawalls, dams, bulk storage facilities.
b-DYWIDAG-Systems International (German Company): Precast Post-Tensioned Girders for 4 bridges with 4 spans each.
7-Prepared shop drawings for Al-Madinah/4th Ring Road and Al-Faiha bridges. A total of four post-tensioned precast I girder bridges with four spans for each bridge including the following main elements:
a-Full height abutments and abutments on columns.
b-Precast Post-Tensioned Girders of 36.7m, 35.76m, 29.75m, and 29.16m spans.
c-Three-column and four-column piers with tapered and straight bent caps on spread footing with total heights of 16.2m and 11.9m.
d-Elastomeric steel reinforced bearing pads.
e-Fill embankments retained by MSE walls (earth reinforcement) of about 500mX4 walls.
8-Designed and prepared shop drawings as per MOT Standards for 40 box culverts ranging from 2 to 6 openings and lengths form 140m to 600m.
9-Designed and prepared shop drawings for lightening pole footings and supervised their casting and pole mounting.
10-Proposed traffic detour plans according to MOT standards during project implementation period.
11-Assigned as vice project manager in the company own ERB system.

الخلفية التعليمية

بكالوريوس, Highway and Bridge Engineering - Civil Engineering
  • في Al-Balqa Applied University
  • يونيو 2012

* Al-Balqa Applied University - Faculty of Engineering Technology, Amman - Jordan (2008-2012) -. Specialization: Highway and Bridge Engineering - Civil Engineering (Bachelor's degree)

Specialties & Skills

Management
Bridge Construction
Site Supervision
Technical Office Engineering
AutoCAD
AUTOCAD
CIVIL 3D
AutoTURN
infrastructure design

اللغات

العربية
متمرّس
الانجليزية
متوسط