Ikram Ullah

Having a Complete procurement Estimation of various
Buildings requirements of its power cables &
other Accessories that comply to the Finalized B.O.Q.
inspect & check of the constructed site
Electrical scope of work in Projects, i.e. all
contracts that involves with electrical works &
installations.
• Reviewing and following of all approved Electrical drawings. Cross check of work done
with the finalized BOQ to compare the scope work & quality.
• Quality Materials Procurement and quotation progression as per site requirement.
• Megger test, cold test, live test, and power panel activation test.
• Complete follow up with FLS drawings.
• Submit daily work progressed report.
2) : )
2):Project:PPI(Peshawarparticleboard):
Responsibilities:
• The main responsibility was implementing of Plant DESIGN which was provided
from German project Dieffenbach Engineers/ team.
• Complete follow up of t o e x e c u t e all electrical works as per approved
electrical drawings.
• All power cables pulling including Main, distribution and controlling.
• Megger testing, cable quality inspection was the part of daily routine.
• Complete Estimation and procurement of Electrical materials that needed to
the Project as per Electrical Drawing/ layout.
• Giving suggestions and orientations to the electricians working at sites.
Sending weekly reports related to the progress of electrical works to the
consultancy.
• Modifications and Site Adopt changes in the Design according to standards in
Electrical drawings and then submit it for Red Line Drawing OR SLD single
line diagram.
• Making Invoice of Pay request related to the progress of electrical works at
the site and then send to the client/consultant.
• Making Punch List at the end of the Project and then follow up of all the

• Executed MEP works on-site in accordance with approved drawings, specifications, and
project standards.
• Reviewed and evaluated MIRs (Material Inspection Requests) and RFIs (Requests for
Information).
• Verified site work against approved drawings, BOQs, and technical submittals to ensure
compliance.
• Reviewed and implemented shop drawings, ensuring alignment with client requirements
and approved documents.
• Conducted regular inspections to ensure all electrical and MEP works comply with HSE
policies and regulations.
• Monitored the quality and quantity of materials delivered and used on-site.
• Performed daily site inspections to track progress and ensure execution matches approved
designs and specifications.
• Coordinated with contractors, consultants, and project teams to resolve technical issues
and ensure smooth workflow.
• Prepared procurement estimations for power cables, electrical systems, and related
accessories as per project BOQ.
• Inspected completed works and ensured compliance with contractual requirements and
project standards.
• Identified and reported non-conformities, ensuring corrective actions are implemented
effectively.
• Supported project documentation, reporting, and progress tracking activities.
• My responsibilities encompassed comprehensive tasks such as scheduling, bar bending
schedules, progress reporting, record maintenance, engineers estimate preparation,
contractor payment verification, and seamless coordination with all stakeholders,
including clients and upper management.
• Furthermore, I have collaborated with Senior Project Managers, Resident Engineers, the
entire project team, contributing to the refinement of objective scope.

calculation of an electrical loads, power DBs designing, cables / Main cables Meggar test, live test, cool test, power DBs activation test and flash test .
preparation of all electrical layouts and further implementation it on the site . verifying all electrical material quality and quantity wise as per approved submittals/ BOQ.
Ducting system, air supply/ air return, VCDs, fire dampers, air diffusers, chilled water system, chilled water return system, chilled water flashing test, water gravity test, fresh air system and air fragrance generator system designing and calculation.
Fire Fight system, sprinklers system, FF gate valve system, integration with Fire Alarm system using fire operated module designing and calculation.
plumbing system, water supply system, water return system, chilled water water, normal water system, RO system, using, PPR, HDPE etc. designing and calculation.

• Monitoring, checking, inspection, site visits, team leading, work, execution as per
electrical drawings and implementation It on the site.
• Main Power cables pulling for LV, ELV, & MV SYSTEMS (from the grid to the substation).
• Installation of power and control panels.
• Connection, cables termination, panel dressing, control wiring termination, panel
activation testing and commissioning.
• performing some QC Tests related to Electrical work such as Ground Testing, Lightening
Protection Tests, wire insulation test to check at the end of the project and hand over to
Diffenbachor.
• Complete Commissioning of DG system using ATS system having load 200kva

• Monitoring, checking, inspection, site visits, team leading, work execution as per electrical
• drawings and implementation on the site.
• Main Power cables pulling for LV, ELV, & low current SYSTEMS.
• Installation of power and control panels. Such as MDB, MCC, PFC, capacitor bank etc.
• Connection, cables termination, panel dressing, control wiring termination, panel
activation testing and commissioning.
• Perform QC Tests related to Electrical work such as Ground Testing, Lightening Protection
Test, cable insulation test to check at the end of the project and hand over to DIFFON
BACHOR.
• Complete Commissioning of DG system using ATS system having load 200kva with the
collaboration of MODARBAH Rental Company.
• Review inspectors daily reports, prepare engineers daily diaries, and oversee inspectors
daily activities, including work assignments and on-site performance.
• Coordinate with contractor supervisory personnel on work schedule, sequence, and
methods.
• Conduct ongoing inspections and consultations with the SRE, preparing written and oral
reports to the RE on contractual and procedural matters.
• Reviewing operational process and installations to ensure the sub-contractors comply
with the design, standards and specifications of the contract documents. Ensuring the
sub-contractors comply with operational and safety standards. Assisting to identify,
respond to or evaluate field construction technical issues to maintain the schedule.
• Verifying the field measurements for main cable lying/ pulling.
• Providing documentation relating to changes in contract work. Assisting in compiling Bill
of Quantity (BOQ) reports for monthly pay estimates. Participating in weekly design
review meetings with electrical engineering team.
• Attend site progress meetings as required by the Senior Resident Engineer (SRE),
identifying constraints and recommending corrective actions.
• Execute site activities, supervise site operations, and provide estimates before and after
execution.
• Verify and adjust reduced levels of different structural members according to drawings.
• Inspect main power cables and test concrete compressive strength.
• Maintain records of laboratory tests and daily work activities.
• Verify executed quantities with consultants to ensure accuracy.
• Study and implement inspection and testing plans (ITPs) for various contractor activities.
• Work with detailed diagrams, plans, and drawings, attending and organizing project
group and technical meetings, and reviewing design submittals.
• Study and implement method statements for different activities.

I worked with German consultant diffon bachor as electrical engineer for 7 years. my responsibility is to check work done as per approved submittals/layout AND single line diagram.
work cross check with subcontractors as per following BOQ.
inspection done on daily base to check work/material quality and quantity following safety rules and IEC, INC & NEC codes.
reject poor quality work straightaway.
performing different test electrical cables such as Megger test, DB LIVE, COOL tests for DB activation.
flashin tests performed for all power DBs to avoid further damage.

• The main responsibility was implementing of the Plant DESIGN which was provided from
German project DIFFON BACHOR.
• Engineers/ team.
• Complete follow up of to execute all electrical works as per approved power/electrical
drawings or layouts.
• power cable pulling including Main, distribution and controlling cables.
• Megger testing, cable quality inspection was the part of daily routine.
• Complete Estimation and procurement of Electrical materials that needed to the Project
as per power Drawings/layout.
• Giving suggestions and orientations to the electricians working at site.
• Sending weekly reports related to the progressed electrical work to the consultant.
• Modifications and Site Adopt changes in the Design according to standards in Electrical
drawings and then submit it for Red Line Drawing OR SLD single line diagram.

• Reviewing and follow up with of all approved Electrical & MEP drawings.
• Inspect & Cross check of work done as per approved/drawing and finalized BOQ to
compare the scope of work quality and used material quantity as well quality.
• Procurement of Quality Materials with quotation progression as per site requirement.
• Megger test, cold test, live test, and power panel activation test.
• Complete follow up with FLS drawings with FLS Consultant and civil defense team/org.
• Submission daily/weekly and monthly progressed report