مجموع سنوات الخبرة: 15 سنوات, 0 أشهر
مايو 2012
إلى حتى الآن
Application Engineer
في eaton
البلد :
الإمارات العربية المتحدة - دبي
Primary Function
Design the Automation Solution as per project requirement, Programming and Testing the Solution as per customer operating philosophy
Essential Functions
1. Develop Software Standards for Automation projects
2. Design and Develop the Software Solution
3. Assist Design Team to select the optimized automation platform for individual project with automation
4. Test and verify the software confirms the operating philosophy
5. Provide Technical support for software related problems on site and telephonic support
6. Continuous improvement and up gradation of the software standards
7. Develop philosophy for the standard blocks
8. Assist Sales support team for automation related project quotes
Design the Automation Solution as per project requirement, Programming and Testing the Solution as per customer operating philosophy
Essential Functions
1. Develop Software Standards for Automation projects
2. Design and Develop the Software Solution
3. Assist Design Team to select the optimized automation platform for individual project with automation
4. Test and verify the software confirms the operating philosophy
5. Provide Technical support for software related problems on site and telephonic support
6. Continuous improvement and up gradation of the software standards
7. Develop philosophy for the standard blocks
8. Assist Sales support team for automation related project quotes
مايو 2012
إلى أبريل 2014
Application Engineer
في Eaton
البلد :
الإمارات العربية المتحدة
Eaton, Application Engineer, 05/2012 till present
Primary Function
Design the Automation Solution as per project requirement, Programming and Testing the Solution as per customer operating philosophy
Essential Functions
1. Develop Software Standards for Automation projects
2. Design and Develop the Software Solution
3. Assist Design Team to select the optimized automation platform for individual project with automation
4. Test and verify the software confirms the operating philosophy
5. Provide Technical support for software related problems on site and telephonic support
6. Continuous improvement and up gradation of the software standards
7. Develop philosophy for the standard blocks
8. Assist Sales support team for automation related project quotes
Primary Function
Design the Automation Solution as per project requirement, Programming and Testing the Solution as per customer operating philosophy
Essential Functions
1. Develop Software Standards for Automation projects
2. Design and Develop the Software Solution
3. Assist Design Team to select the optimized automation platform for individual project with automation
4. Test and verify the software confirms the operating philosophy
5. Provide Technical support for software related problems on site and telephonic support
6. Continuous improvement and up gradation of the software standards
7. Develop philosophy for the standard blocks
8. Assist Sales support team for automation related project quotes
ديسمبر 2009
إلى مايو 2012
Service Engineer
في Eaton
البلد :
الإمارات العربية المتحدة
Eaton, Service Engineer, from 12/2009 to 05/2012
1. Factory Testing of Switchgear, MCC and Control Panel as per project specifications and according to Company quality and standard.
2. Site Commissioning of Switchgear, MCC and Control Panel and update the site visit report with Eaton System. Also to attend service and troubleshooting of supplied project.
3. Provide technical assistance to customers in areas of installation, startup, maintenance, repair, training and modification on switchgear &control panel equipment.
4. Perform the site visit and inspection for old projects were modification is required by customer.
5. Record all data and requested material for executing the modifications.
6. Carry out any necessary modification and record it in the project file to be amended by the design engineer.
7. Follow up the production phase to rectify any problem in early stages.
1. Factory Testing of Switchgear, MCC and Control Panel as per project specifications and according to Company quality and standard.
2. Site Commissioning of Switchgear, MCC and Control Panel and update the site visit report with Eaton System. Also to attend service and troubleshooting of supplied project.
3. Provide technical assistance to customers in areas of installation, startup, maintenance, repair, training and modification on switchgear &control panel equipment.
4. Perform the site visit and inspection for old projects were modification is required by customer.
5. Record all data and requested material for executing the modifications.
6. Carry out any necessary modification and record it in the project file to be amended by the design engineer.
7. Follow up the production phase to rectify any problem in early stages.
ديسمبر 2009
إلى مايو 2012
Service Engineer
في eaton
البلد :
الإمارات العربية المتحدة - أبو ظبي
1. Factory Testing of Switchgear, MCC and Control Panel as per project specifications and according to Company quality and standard.
2. Site Commissioning of Switchgear, MCC and Control Panel and update the site visit report with Eaton System. Also to attend service and troubleshooting of supplied project.
3. Provide technical assistance to customers in areas of installation, startup, maintenance, repair, training and modification on switchgear &control panel equipment.
4. Perform the site visit and inspection for old projects were modification is required by customer.
5. Record all data and requested material for executing the modifications.
6. Carry out any necessary modification and record it in the project file to be amended by the design engineer.
7. Follow up the production phase to rectify any problem in early stages.
2. Site Commissioning of Switchgear, MCC and Control Panel and update the site visit report with Eaton System. Also to attend service and troubleshooting of supplied project.
3. Provide technical assistance to customers in areas of installation, startup, maintenance, repair, training and modification on switchgear &control panel equipment.
4. Perform the site visit and inspection for old projects were modification is required by customer.
5. Record all data and requested material for executing the modifications.
6. Carry out any necessary modification and record it in the project file to be amended by the design engineer.
7. Follow up the production phase to rectify any problem in early stages.
مارس 2009
إلى نوفمبر 2009
Maintenance Engineer
في EMC
البلد :
مصر
EMC, Maintenance Engineer, from 03/2009 to 11/2009
Electric maintenance engineer in Middle east oil refinery (MIDOR) site
Maintenance (PROTECTIVE AND CORRECTIVE) for electric equipment such as electric motors, cathodic protection, AC and DC UPS system, switchgear, lighting, ECS (electrical control system)
TRAINING EXPERIENCE
Middle East Operation & Maintenance for Hydrocarbon Industries (MIDOM) Alexandria, Egypt, July 2005
1. On-site training in maintenance department.
• Participated in educational sessions led by industry experts covering the details of hydrocarbon industry.
Midelec Power station Alexandria, Egypt, July 2006
1. The preventive maintenance for G.T.P.P electrical equipment, which include: o G.T Major Components
o G.T Generator
o G.T Main Transformer
o 33 KV Switch Gear
SEG Middle East LLC Abu Dhabi, UAE, July 2007
1. LV components with demonstration using both Schneider and Seimens components
2. Electrical power generation with a focus on reciprocating engines driven genset
3. Genset control schemes with demonstrations using Woodward components
4. General electrical protection functions with demonstrations using SEG protection relays
5. PLC used in industrial systems with applications related to power generation control and demonstration using AB-SLC and Siemens S7
ATTENDED COURSES
• PLC (Siemens S7-200)
• Siemens S7 300/400 Basic Training
• German language beginners level 1, 2, 3, 4, 5 and 6
• Eaton 9x55 and 9390 UPS
Electric maintenance engineer in Middle east oil refinery (MIDOR) site
Maintenance (PROTECTIVE AND CORRECTIVE) for electric equipment such as electric motors, cathodic protection, AC and DC UPS system, switchgear, lighting, ECS (electrical control system)
TRAINING EXPERIENCE
Middle East Operation & Maintenance for Hydrocarbon Industries (MIDOM) Alexandria, Egypt, July 2005
1. On-site training in maintenance department.
• Participated in educational sessions led by industry experts covering the details of hydrocarbon industry.
Midelec Power station Alexandria, Egypt, July 2006
1. The preventive maintenance for G.T.P.P electrical equipment, which include: o G.T Major Components
o G.T Generator
o G.T Main Transformer
o 33 KV Switch Gear
SEG Middle East LLC Abu Dhabi, UAE, July 2007
1. LV components with demonstration using both Schneider and Seimens components
2. Electrical power generation with a focus on reciprocating engines driven genset
3. Genset control schemes with demonstrations using Woodward components
4. General electrical protection functions with demonstrations using SEG protection relays
5. PLC used in industrial systems with applications related to power generation control and demonstration using AB-SLC and Siemens S7
ATTENDED COURSES
• PLC (Siemens S7-200)
• Siemens S7 300/400 Basic Training
• German language beginners level 1, 2, 3, 4, 5 and 6
• Eaton 9x55 and 9390 UPS
مارس 2009
إلى نوفمبر 2009
Maintenance Engineer
في EMC
البلد :
مصر - الإسكندرية
Electric maintenance engineer in Middle east oil refinery (MIDOR) site
Maintenance (PROTECTIVE AND CORRECTIVE) for electric equipment such as electric motors, cathodic protection, AC and DC UPS system, switchgear, lighting, ECS (electrical control system).
Maintenance (PROTECTIVE AND CORRECTIVE) for electric equipment such as electric motors, cathodic protection, AC and DC UPS system, switchgear, lighting, ECS (electrical control system).
انشر على فيسبوك
انشر على تويتر
مشاركة عبر البريد الإلكتروني