Jamshed Ahmad

PROJECT-: ABDUL KARIM TOWER
Roles & Responsibilities
 Involved in the technical and Management supervision along with site
execution, Desining And Inspection & able to ensure completion of the works on due
time according to project specification, schedules & within the estimated cost.
 Review of the design drawings and material specifications in line with Saudi Aramco
Engineering standards (SAES) codes NFPA-70/NEC, IEC and Material specifications
(SAMSS).
 Prepare project milestone schedule and map it with the workforce & equipment
requirement. Responsible for BOQ and Procurement Inquiry.
 Prepare & Submit daily /weekly / monthly progress report to company management.
 Coordinate with operation & procurement department for the project resources and
materials to help Site Execution.
 Review vendor submittals in line with the project specifications and Saudi Aramco
Standards.
 Planning and execution on the electrical side for Projects closely monitoring the
construction activities, attending weekly meetings with other Engineers and
contractor Maintained weekly status reports.
 Calculate the size selection of transformer and Generator, all types of Control &
Protection Panels, Breaker, cable, and capacitor bank by Electrical load calculation.
 Monitoring Projects for installation of cables & raceways, MV/LV Switch Gear, Power
Transformer, RMU, ATS, PSA, UPS and Battery System, MCC with VFD, DDC Panel for
HVAC system, lighting/illumination requirement, Grounding & lightning protection
System.
 Monitoring of Installation and Termination of low current system Fire alarm Detection
& supperession system, Security (CCTV and Access control System), Public address
system, IP Data & Telephone System, MATV system and Clock system.
 Material receiving inspection of classified electrical equipment, MV/LV/ELV
likeTransformer, AC/DC Panel Board & cables etc.
 Inspection of MV/LV/ELV system like transformer, Switch Gear, RMU, cables, Motor
control centre, cable trays, switch racks, panel boards, industrial receptacle, lighting,
grounding system etc
 Witnessing the Megger & high pot testing, splicing & termination of MV/LV/ELV
System.
 Wide knowledge of contract practice, NEC/NFPA-70, SAES, IEC & SAUDI BUILDING CODE
(SBC) standards.

PROJECT-: DHAHRAN HILLS FIRE STATION & DHAHRAN SCHOOL
: TANDOORI HOUSE PROJECT
Roles & Responsibilities
 Involved in the technical and Management supervision along with site
execution, Desining And Inspection & able to ensure completion of the works on due
time according to project specification, schedules & within the estimated cost.
 Review of the design drawings and material specifications in line with Saudi Aramco
Engineering standards (SAES) codes NFPA-70/NEC, IEC and Material specifications
(SAMSS).
 Prepare project milestone schedule and map it with the workforce & equipment
requirement. Responsible for BOQ and Procurement Inquiry.
 Prepare & Submit daily /weekly / monthly progress report to company management.
 Coordinate with operation & procurement department for the project resources and
materials to help Site Execution.
 Review vendor submittals in line with the project specifications and Saudi Aramco
Standards.
 Planning and execution on the electrical side for Projects closely monitoring the
construction activities, attending weekly meetings with other Engineers and
contractor Maintained weekly status reports.
 Calculate the size selection of transformer and Generator, all types of Control &
Protection Panels, Breaker, cable, and capacitor bank by Electrical load calculation.
 Monitoring Projects for installation of cables & raceways, MV/LV Switch Gear, Power
Transformer, RMU, ATS, PSA, UPS and Battery System, MCC with VFD, DDC Panel for
HVAC system, lighting/illumination requirement, Grounding & lightning protection
System.
 Monitoring of Installation and Termination of low current system Fire alarm Detection
& supperession system, Security (CCTV and Access control System), Public address
system, IP Data & Telephone System, MATV system and Clock system.
 Material receiving inspection of classified electrical equipment, MV/LV/ELV
likeTransformer, AC/DC Panel Board & cables etc.
 Inspection of MV/LV/ELV system like transformer, Switch Gear, RMU, cables, Motor
control centre, cable trays, switch racks, panel boards, industrial receptacle, lighting,
grounding system etc
 Witnessing the Megger & high pot testing, splicing & termination of MV/LV/ELV
System.
 Wide knowledge of contract practice, NEC/NFPA-70, SAES, IEC & SAUDI BUILDING CODE
(SBC) standards.

PROJECT-500 BED AL SALAM HOSPITAL AL KHOBAR, SAUDI ARABIA
➢ Involved in the technical and Management supervision along with
site execution and highly driven in various project related to
Hospital and high-rise building.
➢ Ensuring that the Project is completed on time, within budget within
scope, respecting the NEC, NFPA-70, IEC & SAUDI BUILDING CODE
(SBC) standard and meeting the client’s requirement.
➢ All electrical Medium and low voltage installation works, which were
being carried out as per BOQ specifications and material as per
standard codes NFPA-70, NEC & SAUDI BUILDING CODE.
➢ Evaluate engineering proposals, shop drawing and design comments
for sound electrical engineering practice and conformance with
established safety and design criteria and recommend approval or
disapproval.
➢ Planning and execution on the electrical side for MEP Projects
closely monitoring the construction activities, attending weekly
meetings with other Engineers and contractor Maintained weekly
status reports.
➢ Responsible for BOQ and Procurement Inquiry.
➢ Installations of all electrical works were carried out as per approval
shop drawings ensuring compliance with safety requirements and as
per standards.
➢ Installation and termination of MV/LV Switchgear and transformers
up to 2000KVA, with Copper bus way and Cable.
➢ Designing the solutions and involved in execution i.e. installation, testing,
commissioning & Maintenance of Electrical System.
➢ To prepare As-Built drawings for any deviations during project execution.
➢ Assist in testing the system before the operation.
➢ Prepare daily QA/QC report regarding inspection, material & Non-
conformance etc.
➢ Taking care of QA/QC documents of the entire project including certificate,
calibration, test results, inspection requests, Non compliance reports and
site instruction/observations, permanent materials delivered.
➢ Responsible for the closure of NCR and Site Instruction.

PROJECT-400 BED PSYCHATRIC HOSPITAL ABHA, SAUDI ARABIA
Calculate Load Calculation for the whole project (Panel Board and Package Units).
Check and Approve Tender Drawings For all electrical system.
Calculate the Cable Size and Breakers according to the load.
Approve materials according to the project Specification and Standards.
Supervision of installation of underground Cabling.
Supervision of installation of Earthing and Lightning Protection System.
Supervision of Building Management System (BMS).
Supervision of Street lighting + Ring Road Lighting.
Approve the design of Medium voltage distribution network, Low voltage distribution network and Low current system (external and internal networks).
Supervision of Feeder Pillars and mini Pillars.
Receipt of Operational work and make required tests.
Coordinate with other Mechanical Systems for the desired electrical Load of Machines (Pumps, Fire Fighting and Chillers HVAC System).).
Supervision of installation all types of Lighting + Exhausts fans.
Supervision of all Fire protection systems (Fire Alarm system).
Supervision of Testing and commissioning as per Specification for all electrical equipment.
Supervision of Street Lighting poles 6m, 10m and 12m.
Supervision of CCTV, Data System, Sound system, Clock system.
Supervision of installation all types of Lighting and Power Control Panels. Supervision of installation of Low voltage Cables and Low current Cables.
Supervision of installation all types of Power Panel. Attend meetings with suppliers for approval of materials.

PROJECT DONE-KING ABDUL AZIZ CENTER FOR WORLD CULTURE(KACWC) at
DEHRAN
Calculate Load Calculation for the whole project (Panel Board and Package Units).
Check and Approve Tender Drawings For all electrical system.
Calculate the Cable Size and Breakers according to the load.
Approve materials according to the project Specification and Standards.
Supervision of installation of underground Cabling.
Supervision of installation of Earthing and Lightning Protection System.
Supervision of Building Management System (BMS).
Supervision of Street lighting + Ring Road Lighting.
Approve the design of Medium voltage distribution network, Low voltage distribution network and Low current system (external and internal networks).
Supervision of Feeder Pillars and mini Pillars.
Receipt of Operational work and make required tests.
Coordinate with other Mechanical Systems for the desired electrical Load of Machines (pumps, chillers and air handling units).
Supervision of installation all types of Lighting + Exhausts fans.
Supervision of all Fire protection systems (Fire Alarm system).
Supervision of Testing and commissioning as per Specification for all electrical equipment.
Supervision of Street Lighting poles 6m, 10m and 12m.
Supervision of CCTV, Data System, Sound system, Clock system.
Supervision of installation all types of Lighting Panels and Lighting Control Panels. Supervision of installation of Low voltage Cables and Low current Cables.
Supervision of installation all types of Power Panel. Attend meetings with suppliers for approval of materials.

Electrical Site Engineer