Jaffer Yugi

• As a field engineer I worked on the installation commissioning maintenance, troubleshooting both mechanical and electrical testing power generator, generator inspection, high voltage testing
• As a Mechanical, I install, maintain and repair field-distribution power supplies and lighting. I am also responsible for the mechanical and electrical repair of the Army's field generator systems and heavy plant caterpillar, Komatsu. Overseeing 3 people working in the workshop, fault finding, problem solving, completing servicing and inspections for jobs on generators of all sizes from 2KW to 40KW.hvac equipment, split air conditioning, reefer technician
• Undertaking standard service activities including major and minor diesel servicing.
• Carrying out maintenance and inspections, wiring and testing, fault finding and rectification in both electrical and mechanical disciplines, (experience covers electrical installations
• Electrical installation of control panels‚ changeovers etc.
• Identifying opportunities for remedial work.
• Repair and service motor vehicles eg land crusher Toyota brakes, engine turning up , clutch, transmission system
• Repair and service of heavy trucks, terrains trucks, bull dossers caterpillars, komatsu, Hitachi
• Disseminating full updates on workflow and other information to people under my supervision and to my direct reports, also reporting on quality standards and trade knowledge gaps.
• Using specialist equipment from multi-meters to PAT testing equipment and other specialist tools
• Supporting quality publications and wiring diagrams, overseeing and ensuring works it is completed up to the required high standard.
• Completing all paperwork regarding inspections and failure diagnostics
• Maintained all facilities repair and work orders
• Conducted all preventative maintenance checks in coordination with chief Engineer
• Ensure interior and exterior cleanliness of building
• Answered all questions with courtesy and efficiency
• Performed all task in compliance with security policy and OSHA regulations

• Carry out designated tasks as outlined by workshop leading hand
or the service department manager;
• Inspect machinery and develop a scope of repairs;
• Diagnose and fault find customer and operator complaints;
• Liaise with workshop leading hand or workshop supervisor to
update on job progress and completion times;
• Carry out tasks in accordance with all Force Equipment Service &
Hire policies and procedures;
• Work in and maintain a working environment with an acceptable
level of housekeeping;
• Correctly use and maintain P.P.E. at all times;
• Complete and update Job Safety Analysis (JSA/JHA) prior to
performing all work tasks.
• Use and maintain workshop tooling in accordance to working
specifications and conditions.
• Report and assist in the analysis of incidents or potential hazards.
• Complete service reports of performed work tasks so as to relay
such information to the customer;
• Maintain an accurate time-keeping record relating to work tasks;
• Monitor and record the use of workplace consumables;
• Assist in the training of apprentices and other workshop staff.

Tune gasoline, diesel, and alternate fuel powered engines on light and heavy equipment utilizing all diagnostic and measuring tools.
Perform complete overhaul of gasoline, diesel, and alternate fuel powered engines, major valve jobs, and replacement of gasoline, diesel, and alternate fuel systems.
Troubleshoot, diagnose, and repair electronic and electrical systems including electronically controlled engines, transmission, and fuel systems.
Diagnose, repair, and maintain automatic, standard, and hydrostatic transmissions in conjunction with power take off units, clutches, drivelines, differential assemblies, and final drive units.
Diagnose, troubleshoot, repair, and maintain mechanical and hydraulic steering systems and performs wheel alignments.
Diagnose, repair and rebuild complete hydraulic systems including hydraulic cylinders, motors, pumps, valves lines and related components.
Repair cooling system, performing radiator repair, replacement of cooling system components, water pumps, shutters, and hoses.
Conduct diagnostic testing and repair on computer, batteries, alternators, starters, relay switches, solenoids, regulators, wiring harnesses, and other related electrical components.
Diagnose, troubleshoot, repair, and maintain mechanical and hydraulic steering systems and performs wheel alignments.
Diagnose, repair and rebuild complete hydraulic systems including hydraulic cylinders, motors, pumps, valves lines and related components.
Repair cooling system, performing radiator repair, replacement of cooling system components, water pumps, shutters, and hoses.
Conduct diagnostic testing and repair on computer, batteries, alternators, starters, relay switches, solenoids, regulators, wiring harnesses, and other related electrical components.
Conduct routine and annual inspections and performs preventive maintenance on all vehicles.
Perform frame and body repairs including welding and fabrication.
Maintain records and reports.
Observe

From February 2010 -May 2012
AISGINC
Deals with sales, repair, maintenance and installation of generators, folk lifts and earth moving machines
MECHANICAL TECHNICIAN
Deal with Generators from 5KVA to 3000KVA of different types and models as F.G. Wilson, Perkins, Listter Petter, Caterpillar, Massey Ferguson, JCB, Honda, Yamaha and cumins e.t.c •Scheduled routine maintenance of generators.
•Installation of generators and changeover panels.
•Breakdown and emergency repairs of generators and change over panels.
•Domestic installations and repair of water pumps, fans and other electrical machines. •Designing of generators control panels, change over panels and motor controls. •Maintenance of all record of jobs done.
Main responsibilities include:
• Carry out designated tasks as outlined by workshop leading hand
or the service department manager;
• Inspect machinery and develop a scope of repairs;
• Diagnose and fault find customer and operator complaints;
• Liaise with workshop leading hand or workshop supervisor to
update on job progress and completion times;
• Carry out tasks in accordance with all Force Equipment Service &
Hire policies and procedures;
• Work in and maintain a working environment with an acceptable
level of housekeeping;
• Correctly use and maintain P.P.E. at all times;
• Complete and update Job Safety Analysis (JSA/JHA) prior to
performing all work tasks.
• Use and maintain workshop tooling in accordance to working
specifications and conditions.
• Report and assist in the analysis of incidents or potential hazards.
• Complete service reports of performed work tasks so as to relay
such information to the customer;
• Maintain an accurate time-keeping record relating to work tasks;
• Monitor and record the use of workplace consumables;
• Assist in the training of apprentices and other workshop staff.

Main responsibilities include:
• Carry out designated tasks as outlined by workshop leading hand
or the service department manager;
• Inspect machinery and develop a scope of repairs;
• Diagnose and fault find customer and operator complaints;
• Liaise with workshop leading hand or workshop supervisor to
update on job progress and completion times;
• Carry out tasks in accordance with all Force Equipment Service &
Hire policies and procedures;
• Work in and maintain a working environment with an acceptable
level of housekeeping;
• Correctly use and maintain P.P.E. at all times;
• Complete and update Job Safety Analysis (JSA/JHA) prior to
performing all work tasks.
• Use and maintain workshop tooling in accordance to working
specifications and conditions.
• Report and assist in the analysis of incidents or potential hazards.
• Complete service reports of performed work tasks so as to relay
such information to the customer;
• Maintain an accurate time-keeping record relating to work tasks;
• Monitor and record the use of workplace consumables;
• Assist in the training of apprentices and other workshop staff.

Tune gasoline, diesel, and alternate fuel powered engines on light and heavy equipment utilizing all diagnostic and measuring tools.
Perform complete overhaul of gasoline, diesel, and alternate fuel powered engines, major valve jobs, and replacement of gasoline, diesel, and alternate fuel systems.
Troubleshoot, diagnose, and repair electronic and electrical systems including electronically controlled engines, transmission, and fuel systems.
Diagnose, repair, and maintain automatic, standard, and hydrostatic transmissions in conjunction with power take off units, clutches, drivelines, differential assemblies, and final drive units.
Diagnose, troubleshoot, repair, and maintain mechanical and hydraulic steering systems and performs wheel alignments.
Diagnose, repair and rebuild complete hydraulic systems including hydraulic cylinders, motors, pumps, valves lines and related components.
Repair cooling system, performing radiator repair, replacement of cooling system components, water pumps, shutters, and hoses.
Conduct diagnostic testing and repair on computer, batteries, alternators, starters, relay switches, solenoids, regulators, wiring harnesses, and other related electrical components.
Diagnose, troubleshoot, repair, and maintain mechanical and hydraulic steering systems and performs wheel alignments.
Diagnose, repair and rebuild complete hydraulic systems including hydraulic cylinders, motors, pumps, valves lines and related components.
Repair cooling system, performing radiator repair, replacement of cooling system components, water pumps, shutters, and hoses.
Conduct diagnostic testing and repair on computer, batteries, alternators, starters, relay switches, solenoids, regulators, wiring harnesses, and other related electrical components.
Conduct routine and annual inspections and performs preventive maintenance on all vehicles.
Perform frame and body repairs including welding and fabrication.
Maintain records and reports.
Observe all

Tune gasoline, diesel, and alternate fuel powered engines on light and heavy equipment utilizing all diagnostic and measuring tools.
Perform complete overhaul of gasoline, diesel, and alternate fuel powered engines, major valve jobs, and replacement of gasoline diesel, and alternate fuel systems.
Troubleshoot, diagnose, and repair electronic and electrical systems including electronically controlled engines, transmission, and fuel systems.
Diagnose, repair, and maintain automatic, standard, and hydrostatic transmissions in conjunction with power take off units, clutches, drivelines, differential assemblies, and final drive units.
Diagnose, troubleshoot, repair, and maintain mechanical and hydraulic steering systems and performs wheel alignments.
Diagnose, repair and rebuild complete hydraulic systems including hydraulic cylinders, motors, pumps, valves lines and related components.
Repair cooling system, performing radiator repair, replacement of cooling system components, water pumps, shutters, and hoses.
Conduct diagnostic testing and repair on computer, batteries, alternators, starters, relay switches, solenoids, regulators, wiring harnesses, and other related electrical components.
Diagnose, troubleshoot, repair, and maintain mechanical and hydraulic steering systems and performs wheel alignments.
Diagnose, repair and rebuild complete hydraulic systems including hydraulic cylinders, motors, pumps, valves lines and related components.
Repair cooling system, performing radiator repair, replacement of cooling system components, water pumps, shutters, and hoses.
Conduct diagnostic testing and repair on computer, batteries, alternators, starters, relay switches, solenoids, regulators, wiring harnesses, and other related electrical components.
Conduct routine and annual inspections and performs preventive maintenance on all vehicles.
Perform frame and body repairs including welding and fabrication.
Maintain records and reports.
Observe all

Main responsibilities include:
• Carry out designated tasks as outlined by workshop leading hand
or the service department manager;
• Inspect machinery and develop a scope of repairs;
• Diagnose and fault find customer and operator complaints;
• Liaise with workshop leading hand or workshop supervisor to
update on job progress and completion times;
• Carry out tasks in accordance with all Force Equipment Service &
Hire policies and procedures;
• Work in and maintain a working environment with an acceptable
level of housekeeping;
• Correctly use and maintain P.P.E. at all times;
• Complete and update Job Safety Analysis (JSA/JHA) prior to
performing all work tasks.
• Use and maintain workshop tooling in accordance to working
specifications and conditions.
• Report and assist in the analysis of incidents or potential hazards.
• Complete service reports of performed work tasks so as to relay
such information to the customer;
• Maintain an accurate time-keeping record relating to work tasks;
• Monitor and record the use of workplace consumables;
• Assist in the training of apprentices and other workshop staff.

Main responsibilities include:
• Carry out designated tasks as outlined by workshop leading hand
or the service department manager;
• Inspect machinery and develop a scope of repairs;
• Diagnose and fault find customer and operator complaints;
• Liaise with workshop leading hand or workshop supervisor to
update on job progress and completion times;
• Carry out tasks in accordance with all Force Equipment Service &
Hire policies and procedures;
• Work in and maintain a working environment with an acceptable
level of housekeeping;
• Correctly use and maintain P.P.E. at all times;
• Complete and update Job Safety Analysis (JSA/JHA) prior to
performing all work tasks.
• Use and maintain workshop tooling in accordance to working
specifications and conditions.
• Report and assist in the analysis of incidents or potential hazards.
• Complete service reports of performed work tasks so as to relay
such information to the customer;
• Maintain an accurate time-keeping record relating to work tasks;
• Monitor and record the use of workplace consumables;
• Assist in the training of apprentices and other workshop staff.

From Jan 2008 to Jan 2009
CHINA ENGINEERING
Deals with sales, repair, maintenance and installation of generators, folk lifts and earth moving machines
Meachanical Technician
Dealing with:-
•Generators from 6KVA to 3000KVA of different types and models as F.G. Wilson, Perkins, Listter Petter, Caterpillar and cummins
•Scheduled routine maintenance of generators. •Installation of generators and changeover panels. •Breakdown and emergency repairs of generators.
•Repairs of digital/analogue control and changeover panels. •Programming of digital changeover and control panels. •Designing of generator changeover and control panels.
•Site survey to determine the size of generator, and design /type of installation required. •Commissioning and testing of newly installed generators.Generators from 6KVA to 3000KVA of different types and models as F.G. Wilson, Perkins, Listter Petter, Caterpillar and cummins
•Scheduled routine maintenance of generators. •Installation of generators and changeover panels. •Breakdown and emergency repairs of generators.
•Repairs of digital/analogue control and changeover panels. •Programming of digital changeover and control panels. •Designing of generator changeover and control panels.
•Site survey to determine the size of generator, and design /type of installation required. •Commissioning and testing of newly installed generators.