جيري morillo

Client:Baker Steel Construction
Abu Dhabi Louver
May 2014 - present
Steel Structural Assemble and Erection
Client: Dodsal/GASCO project
HMT Gas Pipeline

2012 March to Present: Position: Crane Operator
Company: Ejar National Cranes & Equipment
Mafraq, Abu Dhabi U.A.E.

March 2014 - May 2014
General Lifting
Client: Larsen & Toubro Ltd./BOROUGE project
P.O. & LDPE project (Al Ruwais)

May 2013 - February 2014
Structural Erection
Client: Sinopec Engineering/TAKREER project
Ruwais Refinery Expansion (Al Ruwais)

Date: 28-02-2013 to 27-02-2014
Safe Crane Operation and Operator Certification (TUV)
ID # HMS-CLED 07-02302

August 2012-March 2013
Pipe & Structural Erection
Client: Kharafi National/GASCO project

Habshan 5 Process Plant (Al Habshan)
April 2012- July 2012
Pipe Erection

Duties and Responsibilities: 1. Operate the crane to the best of my knowledge and as per the manufacturer instructions.
2. Follow and abide by company rules.
3. Abide by working schedule.
4. Not by pass the SLI system of the crane unless authorized by the manufacturer.
5. Not use the crane for capacities exceeding the load charts provided by the manufacturer.
6. Insure that the crane load charts are present and consulted at all times.
7. Operate the crane properly and safely at all times.
8. Inspect the crane daily before start up and report as required by company procedures.
9. Communicate crane problems to company supervisors at any time.
10. Not operate a faulty machine or an uncontrollable system.
11. Keep the equipment in good condition.
12. Insure that no lift is performed outside the crane safe operating radius and capacity.
13. Respond to one agreed slinger / signaler at any time.
14. Respond to a recognized stop signal given by any person.
15. Seek to obtain information regarding the lift and lift planning from the client or supervisor ahead of operation.
16. Refuse to carry any unsafe operation and in case of conflict, notify company supervisor.
17. Check the ground visually and insure to the best of my knowledge that the ground under the crane is suitable and that no excavations or empty ground exist under the crane outriggers before positioning the crane.
18. Use the assigned crane mats at all times under the outriggers.

Full Field Development Project (Al Asab)
September 2011- January 2012
Duties and Responsibilities: 1. Duties for operating the crane in safe way.
2. Responsible for checking the environment prior to setting of the crane.
3. Responsible for handling different loads in a variety of conditions and, if appropriate, crane configuration.
4. Use of proper and adequate signalling techniques.
5. Authorize to operate crane in accordance with the manufacture recommendation.
6. Authorize for routine maintenance, safety checks and inspection and completion of records.
7. Accountable for proper use and checking of crane safety devices prior to using.
8. Accountable for maintaining the crane in good order.
9. Accountable for ensuring crane is properly rigged and de-rigged according to manufacturers' instructions.
10. Accountable for the response from the signal man.

Training and Seminars: Assessment of Mobile Crane Operator
ID# ECD-CLED 13-02108

2012 March to Present: Position: Crane Operator
Company: Ejar National Cranes & Equipment
Mafraq, Abu Dhabi U.A.E.
Client:Baker Steel Construction
Abu Dhabi Louver
May 2014 - present
Steel Structural Assemble and Erection
Client: Dodsal/GASCO project
HMT Gas Pipeline
March 2014 - May 2014
General Lifting
Client: Larsen & Toubro Ltd./BOROUGE project
P.O. & LDPE project (Al Ruwais)
May 2013 - February 2014
Structural Erection
Client: Sinopec Engineering/TAKREER project
Ruwais Refinery Expansion (Al Ruwais)
August 2012-March 2013
Pipe & Structural Erection
Client: Kharafi National/GASCO project
Habshan 5 Process Plant (Al Habshan)
April 2012- July 2012
Pipe Erection

Duties and Responsibilities: 1. Operate the crane to the best of my knowledge and as per the manufacturer instructions.
2. Follow and abide by company rules.
3. Abide by working schedule.
4. Not by pass the SLI system of the crane unless authorized by the manufacturer.
5. Not use the crane for capacities exceeding the load charts provided by the manufacturer.
6. Insure that the crane load charts are present and consulted at all times.
7. Operate the crane properly and safely at all times.
8. Inspect the crane daily before start up and report as required by company procedures.
9. Communicate crane problems to company supervisors at any time.
10. Not operate a faulty machine or an uncontrollable system.
11. Keep the equipment in good condition.
12. Insure that no lift is performed outside the crane safe operating radius and capacity.
13. Respond to one agreed slinger / signaler at any time.
14. Respond to a recognized stop signal given by any person.
15. Seek to obtain information regarding the lift and lift planning from the client or supervisor ahead of operation.
16. Refuse to carry any unsafe operation and in case of conflict, notify company supervisor.
17. Check the ground visually and insure to the best of my knowledge that the ground under the crane is suitable and that no excavations or empty ground exist under the crane outriggers before positioning the crane.
18. Use the assigned crane mats at all times under the outriggers.

2007 October to 2012 February: Position: Mobile Crane Operator
Company: Al Jaber Heavy Lift and Transport
P.O. Box 2175 Abu Dhabi U.A.E.
Client: Bechtel/GASCO project
Onshore Gas Development 3 (Al Habshan)
February 2008- August 2008
Loading and Unloading of materials
Client: Technimont/BOROUGE project
Polyolefins Unit Product Handling and Marine (Al Ruwais)
September 2008- October 2009
Structural/Pipe Erection
Client: Al Jaber Company Asphalt Plant Division
(Abu Dhabi Airport)
November 2009- January 2010
Plant Demolition/General Lifting
Client: Petrofac/ADCO project

January 2010- September 2010
Manhole Installation

(Abu Dhabi Airport)
November 2009- January 2010
Plant Demolition/General Lifting
Client: Petrofac/ADCO project
Full Field Development Project ( AlAsab)

September 2008- October 2009
Structural/Pipe Erection
Client: Al Jaber Company Asphalt Plant Division

Client: Bechtel/GASCO project
Onshore Gas Development 3 (Al Habshan)
February 2008- August 2008
Loading and Unloading of materials
Client: Technimont/BOROUGE project
Polyolefins Unit Product Handling and Marine (Al Ruwais)

Date:10-11-2007
Safe Rigging and Slinging Training Course (TUV)
ID # RSS-CLED 07-02319
Date: 13-11-2007

2012 March to Present: Position: Crane Operator
Company: Ejar National Cranes & Equipment
Mafraq, Abu Dhabi U.A.E.
Client:Baker Steel Construction
Abu Dhabi Louver
May 2014 - present
Steel Structural Assemble and Erection
Client: Dodsal/GASCO project
HMT Gas Pipeline
March 2014 - May 2014
General Lifting
Client: Larsen & Toubro Ltd./BOROUGE project
P.O. & LDPE project (Al Ruwais)
May 2013 - February 2014
Structural Erection
Client: Sinopec Engineering/TAKREER project
Ruwais Refinery Expansion (Al Ruwais)
August 2012-March 2013
Pipe & Structural Erection
Client: Kharafi National/GASCO project
Habshan 5 Process Plant (Al Habshan)
April 2012- July 2012
Pipe Erection

Duties and Responsibilities: 1. Operate the crane to the best of my knowledge and as per the manufacturer instructions.
2. Follow and abide by company rules.
3. Abide by working schedule.
4. Not by pass the SLI system of the crane unless authorized by the manufacturer.
5. Not use the crane for capacities exceeding the load charts provided by the manufacturer.
6. Insure that the crane load charts are present and consulted at all times.
7. Operate the crane properly and safely at all times.
8. Inspect the crane daily before start up and report as required by company procedures.
9. Communicate crane problems to company supervisors at any time.
10. Not operate a faulty machine or an uncontrollable system.
11. Keep the equipment in good condition.
12. Insure that no lift is performed outside the crane safe operating radius and capacity.
13. Respond to one agreed slinger / signaler at any time.
14. Respond to a recognized stop signal given by any person.
15. Seek to obtain information regarding the lift and lift planning from the client or supervisor ahead of operation.
16. Refuse to carry any unsafe operation and in case of conflict, notify company supervisor.
17. Check the ground visually and insure to the best of my knowledge that the ground under the crane is suitable and that no excavations or empty ground exist under the crane outriggers before positioning the crane.
18. Use the assigned crane mats at all times under the outriggers.

2007 October to 2012 February: Position: Mobile Crane Operator
Company: Al Jaber Heavy Lift and Transport
P.O. Box 2175 Abu Dhabi U.A.E.

Full Field Development Project ( AlAsab)
January 2010- September 2010
Manhole Installation
Client: S.K Engineering and Construction/ADCO project
Bab Gas Compression Project (Al Habshan)
October 2010- August 2011
Tank Erection, Centrifugal Pump Erection (9.7 tons), Seal Vessel Erection
Client: Petrofac/ADCO project