QUALITY ASSURANCE/QUALITY CONTROL (QA/QC) ENGINEER
Al Naboodah Construction Group
Total years of experience :17 years, 11 Months
Project: Comprehensive Improvement of the Parallel Roads (Scope of works are bridges, asphalt works in roads,
underpass, bridge ramp, roadway signage, street lighting, and protection of services such as
DEWA-ED, DEWA-WD, Etisalat, sewerage, storm drainage and irrigation systems.
Client : Roads and Transport Authority
**Duties and Responsibilities:
To ensure that the work is in full compliance with contract specifications, drawings, method statement and ITP (inspection and test plan) during the execution of the work on site and ensure quality as per specification and client satisfaction and approval.
Conducts daily surveillance inspection on site to ensure that all site activity has been inspected and high quality of work is achieved prior to inspection of the client.
Prepare material submittal for approval of the client.
Conducts material inspection coming to site by preparing material inspection request in order to ensure that materials to be used for work are approved by the client. Prepares the material that needs test and reviews the test result if it is within the limit based on project specification.
Checking of earthworks, structural and finishing works and ensure that high quality of work is accomplished on site that is subject for client approval.
Issues non conformance report and QAQC observation memo with regards to deficiency of work on site.
Prepares method statement and ITP (Inspection and Test Plan) to ensure that the scope of work is properly followed and necessary inspection for the said activity on site is submitted to the client which is subject for their review and approval.
● QUALITY CONTROL (QC) INSPECTOR ( with N.O.C.)
Gulf Consolidated Contractor (GCC) - Wade Adams; Doha, State of Qatar
(Joined: May 2012 to June 2015)
Project: Construction of Roads, Utility Crossings and Street Lighting in the Industrial Area in Mesaieed
Client : Qatar Petroleum (QP)
(May 31 2012 up to June 5, 2014)
**Duties and Responsibilities: (May 31 2012 up to June 5, 2014)
To ensure that the work is in full compliance with contract specifications, drawings, method statement and ITP (inspection and test plan) during the execution of the work on site and ensure quality as per specification and client satisfaction and approval.
Conducts daily surveillance inspection on site to ensure that all site activity has been inspected and high quality of work is achieved prior to inspection of the client.
Prepare material submittal for approval of the client.
Conducts material inspection coming to site by preparing material inspection request in order to ensure that materials to be used for work are approved by the client. Prepares the material that needs test and reviews the test result if it is within the limit based on project specification.
Checking of earthworks, structural and finishing works and ensure that high quality of work is accomplished on site that is subject for client approval.
Issues non conformance report and QAQC observation memo with regards to deficiency of work on site.
Prepares method statement and ITP (Inspection and Test Plan) to ensure that the scope of work is properly followed and necessary inspection for the said activity on site is submitted to the client which is subject for their review and approval.
Project: Al Udeid Airbase - New Runway and Associated Works
Client: Qatar Armed Forces (GHQ)
**Duties and Responsibilities: (June 7, 2014 up to June 2, 2015)
To ensure that the work is in full compliance with contract specifications, drawings, method statement and ITP (inspection and test plan) during the execution of the work on site and ensure quality as per specification and client satisfaction and approval.
Conducts daily surveillance inspection on site to ensure that all site activity has been inspected and high quality of work is achieved prior to inspection of the consultant.
Prepare material submittal for approval of the client.
Conducts material inspection coming to site by preparing material inspection request in order to ensure that materials to be used for work are approved by the client. Prepares the material that needs test and reviews the test result if it is within the limit based on project specification.
Checking of earthworks and asphalt works to ensure that high quality of work is accomplished on site that is subject for approval of the consultant.
Issues non conformance report and QAQC observation memo with regards to deficiency of work on site.
Prepares method statement and ITP (Inspection and Test Plan) to ensure that the scope of work is properly followed and necessary inspection for the said activity on site is submitted to the client which is subject for their review and approval.
To ensure that the work is in full compliance with contract specifications, drawings and method statement during the execution of the work on site and ensure quality as per specification and client/consultant satisfaction and approval.
Prepares site monitoring forms for record of all the sequence of work on site has been followed.
Prepares inspection request (IR) for submission to the consultant.
Conducts material inspection coming to site by preparing material inspection request in order to ensure that materials to be used for work are approved by the client/ consultant. Prepares the material that needs test and reviews the test result if it is within the limit based on project specification.
Checking of structural and finishing works and ensure that high quality of work is accomplished on site that is subject for client/consultant approval.
Issues non conformance report and QAQC observation memo with regards to deficiency of work on site.
Prepares method statement and ITP (Inspection and Test Plan) to ensure that the scope of work is properly followed and necessary inspection for the said activity on site is submitted to the client which is subject for their review and approval.
● SITE ENGINEER
Dubai Rapid Link Consortium ( DURL) under Obayashi Corporation; Dubai, U.A.E. (Joined: May 2008 up to January 2010)
Project: Dubai Metro - Client: Roads and Transport Authority (RTA)
**Duties and Responsibilities: ➢ Supervising the construction of the Dubai Metro station and ensure that the implementation of all the construction works on site from structural to finishing, including post-tensioning works are done accordingly as per project contract and specifications.
➢ Supervising safety of the following on site; excavation works, competency of equipments and the operator, proper storage of hazardous and flammable materials, proper scaffolding installation, and proper usage of electrical equipments on site.
➢ Preparing daily accomplishment reports on activities on site.
➢ Preparing all documents needed for inspection on site for verification of QA/QC Engineer, and the consultant.
➢ Providing safety precaution on site and implementing safety rules and guidelines on site and use of safety gears by every worker.
➢ Monitoring material availability on site and scheduling procurement and delivery.
➢ Implementing quality control during material inspection of suppliers and work inspection of sub-contractors in the site prior to final inspection of QA/QC Engineer and the consultant.
➢ Review of plans and report/ coordinate with construction managers any conflicts against actual site condition.
● PROJECT ENGINEER
F.I. Regencia Builders - Quezon City, Philippines (Joined June 2006)
**Duties and Responsibilities: ➢ Project supervision and implementation from permit processing to turnover.
➢ Preparing schedule of activities base on project start and completion.
➢ Supervising safety of the following in site; excavation works, competency of equipments and the operator, checking if hazardous and flammable materials are kept in its right place, scaffolding installation, and proper usage of electrical equipments on site.
➢ Providing safety precaution on site and implementing safety rules and guidelines on site and use of safety gears by every worker.
➢ Preparing monthly accomplishment reports, and presiding monthly meetings to update designers, owners and superiors on project development.
➢ Preparing cost estimate and bill of materials in accordance with plans and specification.
➢ Canvassing materials from different suppliers and evaluate by price, brand and quality.
➢ Soliciting, evaluating and recommending quotations from suppliers, contractors and sub-contractors base on reliability, quality and workmanship.
➢ Conducting regular coordination meeting between contractors, sub-contractors and suppliers.
➢ Monitoring material availability on site and scheduling procurement and delivery.
➢ Implementing quality control during material inspection of suppliers and work inspection of contractors and labor sub-contractors.
➢ Evaluating and recommending weekly accomplishment reports submitted by labor contractors and billings of suppliers and contractors.
➢ Review of plans and report/ coordinate with designers any conflicts against actual site condition.
➢ Preparing shop drawing for Architect's approval prior to implementations.
PROJECTS HANDLED: • GREENWOODS HOMES (6-Storey Residential Building) Q.C., Philippines
• CITI BUSINESS PLAZA (15-Storey Commercial Building) Makati City, Philippines
● SITE ENGINEER ( Jan. 2006 - May 2006)
Project: Additional 4-Storey Building of Pleasant Mount School, Antipolo City, Philippines.
**Duties and Responsibilities: ➢ In charge of the construction of concrete road, drainage system, housing projects, buildings, perimeter fencing, earthworks and landscaping.
➢ Implementing quality control during material inspection of suppliers and work inspection of contractors and labor sub-contractors.
➢ Providing safety precaution on site and implementing safety rules and guidelines on site and use of safety gears by every worker.
➢ Supervising of all works done by daily workers and Sub- Contractor.
➢ Implementing the project cost reduction.
➢ Surveying the grade elevation.
➢ Checking and recording the daily materials withdrawn and received.
➢ Materials canvassing, purchasing and monthly inventory.
➢ Preparing the Sub-Contractor's weekly accomplishment.
➢ Estimating the quantity of materials base on plan & actual measure
● CONSTRUCTION ENGINEER ( Sept. 2005 - Dec. 2005)
Project: Our Lady of Fatima Parish Church - Cainta, Philippines.
**Duties and Responsibilities: ➢ Scheduling of works on a daily basis for the maintenance of the property.
➢ Providing safety precaution on site and implementing safety rules and guidelines on site and use of safety gears by every worker.
➢ Coordinate with the Owner on works to be done.
➢ Check listing equipment and materials needed for daily works.
➢ Monitor the works being done and the attendance of the personnel.
*A Graduate with a degree of "Bachelor of Science in CIVIL ENGINEERING" - (Technological Institute of The Philippines) *Knowledge in AUTOCADD, ESTIMATION, MS WORD, MS EXCEL, MS MAIL & Internet Explorer.
