HSQE Engineer
Khidmah LLC
مجموع سنوات الخبرة :18 years, 7 أشهر
1. To conduct proactive periodic inspections on fodder sites during a 24/7 cycle and promote safety leadership at contract site.
2. To ensure all contractors and other personnel on site understand and comply with HSE requirements and regulations and strive toward zero harm to life and property.
3. To report Khidmah and Aldar and liase with project site team on HSE Incidents and near misses.
4. To provide adequate information, instruction, supervision and training to Khidmah employees in matters related to HSE.
5. Daily report HSE Violations and follow ups in implementing controls and corrective/preventive actions to mitigate to risk.
6. To provide HSE support on site as required.
7. To ensure all reporting meets Khidmah’s requirements in a timely manner.
8. To coordinate with Facility Managers/Supervisors and Project client on site Manager to ensure that compliance to regulatory requirements and instructions from regulatory authorities met.
9. Documentations for HSE Management systems in line with OHSAS 18001:2007 standards, and local and international reporting requirements.
10. To be responsible for own safety compliance to the HSE regulations and Federal Laws.
11. Review and approved Method Statements, Risk Assessments and emergency plans.
12. Review and approve Permit to Work.
13. Personally responsible for own safety and conducting one’s self to the standards of Khidmah Policies and Procedures.
14. Coordinate with Facility Managers, Owners Association Managers, Department Directors nad project supervisors involving HSE concerns.
15. Liaison with Third Party contractors in regards to HSE matters.
16. Consultation with outside experts on HSE matters when required.
17. Responsible for adherence to company guidelines.
18. Developing, implementing and updating evacuation plans, procedures and measures.
19. Monitor the compliance against the monthly HSE Schedule.
20. Coordinate with the senior management concerning the implementation of the Safety Management System onsite and the ongoing instructions to all personnel in its use.
21. Monitor readiness / response to emergency situations through the regularly held and documented drills.
22. Execution/reviewing/monitoring of required QHSE Inspection for office areas and worker accommodation, reporting findings to the Accommodation Manager.
23. Monitor safety compliance with travel / pool vehicles and checklist under discussion with logistic coordination.
24. Conducting regular safety checks and escalating feedbacks and emergency issues to the Project Facility Manager and HSE Manager / Supervisor.
25. Establishing, Managing and administrating safety plans and evacuation drills.
26. Eliminating and controlling hazardous condition.
27. Developing and recommending a new HSE procedures and revising the existing ones.
28. Ensuring HSE aspects of the assets and operations and providing alerts and inspection reports.
29. Coordinating and liaising with PM Team for implementing procedures for safe environment for visitors, staff, equipment, cark park issues and produce reports.
30. Performing periodic and random inspections of the project sites, contract sites and properties, stores and camps as per schedule from HSE Manager and produce reports.
31. Perform HSE Audits on HSE aspects related to soft services and hard services by FM Team and Contractors.
32. Performing regular floor walks and documented checks to ensure cleanliness and hygiene of Khidmah staff.
33. Discuss and produce reports with FM Team on safe operation of Technical equipment such as HV, LV systems Fire Protection systems, Fire Alert and Firefighting systems, Gas systems, access control systems, storage and distribution systems are maintained in a safe manner.
Execute safety programs for locations and minimize company safety losses.
Develop a culture to anticipate and prevent health hazardous conditions.
Drive behaviors preventing illnesses in work place by engaging management commitment.
Interpret legal requirements and standards by monitoring projects.
Investigate incidents, determine root cause and develop corrective actions.
Support HSE inspections, audits and self-assessments.
Manage reports and present summaries to management with suggested solutions.
Execute environmental management processes such as chemicals and waste management and pollution prevention.
Handle industrial hygiene, equipment protection, machine guarding and other health and safety programs.
Handle safety assessments and deploy corrective measures to minimize hazard risk profile.
Report to NCC Safety Manager with dotted line to operations.
Administer NCC safety policies and develop uniform safety practices as per long term company safety goals.
Offer quality product safely and effectively and decrease errors and accidents and increase profits.
Achieve health and safety management excellence.
1. Position: HSE Supervisor
Duration: Feb 19, 2012 - Nov 25, 2013 (1.8 yrs)
Company: Daewoo Engineering And Construction
Company Industry: Chemical / Fertilizers / Pesticides
Location Kingdom Of Saudi Arabia
Department: HSE Department
Job Description:
1.Performs routine safety training sessions and holds toolbox talks with the crews on job sites or at show ups.
2.Performs regular job-site inspections of all crews in order to identify any unsafe work practices and unsafe conditions, documenting the visits on observation forms and forwarding findings to various administrative and management personnel.
3.Responsible for the coordination of supplemental inspections when new equipment, substances or processes are introduced as well as when new or formerly indistinguishable hazards are discovered.
4.Helps with the completion of project safety planning and hazard investigation with supervisors, foremen, and managers on new jobs. 5.Verify that corrective processes are finished in a suitable amount of time for all identified hazards.
6.Verify the completion of safety recommendations made by the insurance carrier, safety committee or any other safety consultants. 7.Investigate illnesses and injuries in order to determine the cause and take affirmative action toward preventing recurrence.
8.Submit status reports each week that specifies projects that were completed during that particular week.
9.Makes sure that proper fire extinguishers and first aid supplies are kept on or near company equipment and vehicles.
10.Enforces all of the company safety rules.
11.Works with supervisors and managers in order to apply adequate disciplinary procedures for employees who violate the safety rules.
2. Position: Safety Officer/Work Permit Receiver
Duration: Feb 17, 2010 - Feb 18, 2012 (2 yrs)
Company: Suedrohrbau Sa. Ltd.
Company Industry: Oil / Gas
Location Damam, Saudi Arabia
Department: HSE Department
Job Description:
Safety Officer;
1.) Investigates accidents and advises preventive measures.
2.) Studies imminent threats within the work facility.
3.) Conducts activities that promote security and administer safety training.
4.) Conducts safety inspections, makes incident records, and reports the supervisor.
5.) Understands important regulations and is familiar with revisions, trends, and updates concerning best practices in safety.
Specific Tasks:
* Ensures that company personnel observe and follows established safety guidelines.
* Attends regular department meetings to remain in line with comprehensive safety practices of the company.
* Assists in the organization of awareness campaigns regarding safety, such as workshops for occupational safety, fire safety, etc.
* Assists in the conduct of fire and emergency drills.
Permit Receiver
TWELVE RULES ON WORK PERMIT PROCEDURE (Aramco G.I. 2.100)
1) Issuer and receiver must inspect job site together before signing the work permit.
2) Issue the correct permits for the job - hot, cold, vessel or confined space entry, and/or gasrelease. Two or more permits may be required for the job.
3) Issuer and receiver must both have in their possession a valid work permit certification card (issuer and receiver respectively)
4) J-W Sniffer gas test and/or H2S gas test and/or oxygen analysis test must be made beforeissuing work permit.
5) Job description and equipment used must be clearly stated on the work permit. Be specific, issuepermits for a single pump, drum, etc.
6) All tick boxes must be correctly filled in and gas readings indicated.
7) Proper lockouts, hold tags, and blinds must be used where applicable (multiple clips with lock, and/or chains with padlocks)
8) Work permits should be issued for the specific period of time required to complete the job.
9) To extend time work permit beyond one shift, the oncoming shift issuer must inspect job site, write in extended time and sign permit.
10) Special precautions such as requirements for fire watch, Scott air packs, life lines, barricades, etc.must be written on the permit.
11) The work permit must remain on the job site in a conspicuously visible place while work is goingon. If an emergency develops, the permit must be withdrawn immediately and all work stoppedwithout questions.
12) The work permit must be closed out after a job is completed. Issuer and receiver must inspectthe job site and sign off the work permit
3. Position: Safety Officer / Work Permit Receiver
Duration: Sep 20, 2008 - Feb 16, 2010 (1.4 yrs)
Company: Daewoo Engineering And Construction
Company Industry: Oil / Gas
Location Daewoo Qatar
Department: Hse Department
Job Description:
Those receiving a Permit and Certificate/s must:
1. Review the permit, identify the equipment and work location.
2. Ensure that only skilled, qualified, trained and competent workers are assigned to complete the work.
3. Sign the permit and certificate/s to acknowledge understanding of all stated conditions. Advise the Responsible Officer if any the permit requirements are ambiguous or unclear and seek clarification.
4. Ensure all members of the work team have read and understood the permit and certificate/s conditions.
5. Ensure the work team complies with all permit and certificate conditions.
6. Inform the Responsible Officer of any change in conditions at the work site.
7. Ensure the work site is left in a clean, tidy and secure state.
8. Return the permit to the Responsible Officer at the end of the work or permit expiry time. Sign the permit to acknowledge completion of the permit work scope
4. Position: Junior Safety Officer
Duration: May 15, 2005 - May 15, 2008 (3 yrs)
Company: Four G Construction and Development Corporation
Company Industry: Construction / Building / Engineering
Location Manila, Philippines
Department: HSE
Job Description:
HEALTH AND SAFETY OFFICER
DUTIES AND RESPONSIBILITIES: 1. To develop, implement and monitor Board Occupational Health and Safety Policy, Programs, and
Procedures;
2. To assist the Board in complying with current health and safety legislation and/or regulations with the objective of ensuring that all reasonable and proper measures are taken to protect the safety and
health of learners, staff and visitors;
3. To establish budget proposals for the operation of the Occupational Health and Safety office and specific training programs;
4. To increase health and safety awareness at all levels within the organization;
5. To investigate and report on all serious/critical personal injury accidents occurring to students, staff
and/or visitors to the appropriate senior official, and to assist in the investigation of all
accidents/incidents that result in substantial damage to Board vehicles and property;
6. To investigate and report on complaints of hazardous working conditions to the Associate Director
and/or other appropriate senior staff;
7. To respond to employees' safety concerns;
8. To conduct, as necessary, the safety inspection of any Board facility;
9. To assist the Board's Joint Occupational Health & Safety Committees;
10. To respond to fires and other emergencies on or about the Board property;
11. To coordinate registration and removal of hazardous waste;
12. To receive reports from and respond to orders issued by Department of Labor inspectors;
13. To arrange for Occupational Health and Safety testing and/or evaluations of the workplace by external agencies/consultants as may be necessary;
14. To act as liaison with all related governmental bodies and regulating agencies;
15. To coordinate the training of personnel in areas of safety, including first aid, CPR, accident
prevention and investigation, work place inspections and other matters related to implementing safety
procedures in Board facilities;
16. To coordinate the Board's emergency procedures and act as the Board's emergency on-site
coordinator;
17. To assist executive staff, senior administrators, principals and supervisors in emergency preparedness;
18. To develop, review, and update appropriate sections of the Board's Emergency Procedures Manual;
19. To liaise with municipal and State Emergency planners, update plans, organize exercises and evaluate
procedures;
20. To liaise with the fire department regarding emergency procedures, communications and fire safety
education programs;
21. To coordinate the selection and distribution of emergency communications equipment to schools and administrative/support departments;
22. To assume other duties as may be assigned.
Highest Education Second Highest Education Education Level: College Level (Undergraduate) Vocational Diploma / Short Course Certificate Education Field: Education/Teaching/Training Computer Science/Information technology Course: BS Education - Secondary Education Major in English Computer Basic Programming School/University: Bataan Peninsula State University (Formerly Bataan Polytechnic State College) Perl Computer Center Location: Balanga, Bataan Philippi9nes Sta Cruz Manila, Philippines Date: Jun 2003 - Jun 2005 May 1999 - May 1999