Service Technician
NATIONAL OILWELL VARCO
Total years of experience :17 years, 7 Months
Clean, service, refurbished, downhole tools.
Assemble, disassembled, of drilling tools ( Mud Motors, Drilling/Fishing Tools, Coiled Tubing Tools, and Under Gauge products).
Visually checked parts upon third party inspection completion.
Take necessary measurement to fill the service reports ( handwritten and EDS).
Operate and maintained equipment.
Operate crane and forklit to load/unload parts and materials.
Perform various other duties and activities as a assigned by the leash and / shop supervisor.
October 2012-Present
Mattex Geosynthetics Jubail-KSA
(Saudi Co. for Mfg.of Carpet Materials)
Mechanical Maintenance Technican Level IV
➢ Performs regular routings and visual inspections performed from extrusion machine, spinning dies, godet roller, gearbox, pumps, crimper machine, utter wheels and valvan bailing machine
➢ Analyzes vibration reading and monitoring the temperaure of the machineries, pumps motors and gearboxdrives
➢ Handles forklift preventive and breakdown maintenance and used for load and offload materials at the plant
➢ Performs precautionary, weekly maintenance checklist and breakdown maintenance of all the machineries inside and outside the plant
➢ Performs spinning dies assembly, dismantling, cleaning and installation
Performs fitting activities in accordance with site safety policy and practices.
Responsible and accountable for maintenance and repair work, pumps, valves, rollers, conveyors etc.
Performs work in industrial setting with expose to heat, cold, dust, noise, and vibration.
March 2008- April 2012
BATAAN 2020 INC.
(Paper Mill Company)
226 Quirino Hi-way Baesa, Quezon City
Preventive Maintenance/Lube man
➢ Prepares all tools and equipment needed in the job; checks if oil and grease gun are full and with the right kind of lubricant
➢ Performs preventive maintenance of all scheduled machine and equipment; removes waste grease and apply new one on bearings; puts or adds oil to machine; checks oil lubricating parts and oil lines; report any damages observed to MMD team leader
➢ Records all necessary data on lubricant consumption report
➢ Washes with chemicals and wipes all tools used; cleans designated area after work
➢ Performs routine inspection mill wide; notes for leaks, abnormalities, vibration, and high temperature of equipments and check oil level and grease, adds lubricant when necessary
➢ Prepares Preventive Maintenance Report and submit to MMD team leader.
➢ Assists the millwrights in repairing and lubricating of damage machine or equipment
➢ During shutdown, performs preventive maintenance base on road mapping of equipments which cannot be lubricated when on the run; inspect bearing clearance and check for scratches; checks oil levels and grease of all machines and equipment
➢ Maintains safety precaution in the performance of the job and performs other duties as may be assigned
September 2007 - January 2008
ORIENTAL TIN CAN
( Tin Can and Metal Sheet Manufacturing)
General Luis Avenue, Bo. Capri Quezon City
Machine Operator (Bridge Port Milling Machine)
➢ Secures all needed tools for a specific job in warehouse
➢ Performs Machining jobs of different work piece into usable parts, based on required dimensions specified in drawings
➢ Washes with chemicals and wipes all tools used; cleans designated area after work
September 05, 2006 - February 26, 2007
UNITED CONTAINER CORPORATION
(Plastic Container Manufacturing)
720AGen. Luis St. Bo. Kaybiga, Caloocan City
Quality Controller
➢ Prepares daily production report based on production schedule
➢ Assign workers to their respective task
➢ Getting the actual cycle time of all blowing/injection machines in able to get the target product output
➢ Adjusts/control s and maintain the correct weight of all the product based on the product standards
➢ Prepares Line Clearance of all the product in line with their respective machine assignment
January 25, 2006 - June 29, 2006
VILLARCO MANPOWER SERVICES/MIG SYSTEM INC.
(PE Pipe, PVC Pipes and Fittings Manufacturing)
Malinta Valenzuela
Quality / Production Engineer
➢ Prepares the daily production report based on stock and purchase order
➢ Checks the quality of pipes and fittings, visually, dimensionally
➢ Performs Burst Test using hydro testing apparatus, to measure pipe pressure capacity in different sizes
➢ Prepares daily production schedule and assign manning in all running equipments and machines
➢ Coordinates all orders and deliveries to all of our customers
➢ Conducts daily extrusion/ injection report based on daily production plan
September 2004 - January 15, 2005
MITSUBISHI HEAVY INDUSTRIES INC.
(Car Aircon Division)
Cainta, Pasig
Assistant Q.C. Engineer
➢ Conducts assembly line monitoring report as part of daily report also for purpose of reference
➢ Prepares Non-conformance report of all the rejected parts based on set quality standard
➢ Conducts checking and measuring actual dimension of ingoing and outgoing parts based on given design using veneer/micrometer calliper, height gauges, steel rule and multi-tester
➢ Assists QC Engineer in preparing parts ordered by clients and check the volume of items
1998-2004 TECHNOLOGICAL INSTITUTE OF THE PHILIPPINES 938 Aurora Blvd. Cubao, Quezon City Bachelor of Science in Mechanical Engineering
1994-1998 PANGARAP HIGH SCHOOL Pangarap Village, Caloocan City