Senior Quality Assurance / Quality Engineer
Saudi Arabian Bechtel Company (SABCO)
Total years of experience :37 years, 0 Months
Senior Quality Assurance / Quality Control/ Quality Engineer in BACS Riyadh Metro project having completed 4 years and 11 months responsible in closing-out non-compliance reports with the consultants, client engineers through regular site walk downs in almost all the stations. Certified as Six Sigma Yellow Belt on waterproofing activity. Given job completion on May 31, 2019
-To read and understand the Specifications, Method Statements and design information and ensure the same is adhered to by the Contractor.
-To ensure the standards of Safety and Quality are not compromised.
-Monitoring the Contractor's activities and ensuring compliance with the Employer's Requirements and approved documentation.
-Manage Contractor's own time and prioritize effectively.
-Relate Specifications and drawings to Method Statements and Site Inspections and actual site activities.
-Review documents submitted to ensure they comply with safe working practices and the Employer's Requirements.
-To stop with immediate affect, any activity that, in the judgment of the individual, constitutes an unacceptable risk to the safety of any person, or the environment.
-Reports to the Senior Engineer/Deputy RE
-Informal communication with the Contractor for technical, safety and quality matters.
-To ensure the standards of safety and Quality are not compromised.
-To review the Contractor's short-term program, prioritize areas which require most attention and plan for the surveillance with the Inspectors.
-Monitoring the Contractor's activities and ensuring compliance with the Employer's Requirements and approved documentation.
-Initiating NCR's for any non-conforming works.
-Review documents submitted to ensure they comply with safe working practices and the Employer's Requirements.
-Observe and ensure safe working practices are maintained at all times.
-To stop with immediate effect, any activity that, in the judgment of the individual, constitutes an unacceptable risk to the safety of any person, or the environment.
-To advise the Contractor immediately if any activity is observed to be carried out in a manner that compromises the quality of the product, that the works may not be accepted as part of the permanent works.
-Informal communication with the Contractor for technical, safety and quality matters.
-To read and understand the Specifications, Method Statements and design information and ensure the same is adhered to by the Contractor.
-To ensure the standards of Safety and Quality are not compromised.
-To ensure the Contractor is following approved Method Statements.
-To review the Contractor’s short-term program, prioritize areas which require most attention and plan for the surveillance with the Inspectors.
-Close-out of NCR’s
-Monitoring the Contractor’s activities and ensuring compliance with the Employer’s Requirements and approved documentation.
-Maintaining accurate and detailed records.
-Following the QMS.
-Manage Contractor’s own time and prioritize effectively.
-To stop with immediate affect, any activity that, in the judgment of the individual, constitutes an unacceptable risk to the safety of any person, or the environment.
-To advise the Contractor immediately if any activity is observed to be carried out in a manner that compromises the quality of the product, that the works may not be accepted as part of the permanent works.
-Reports to the Senior Engineer/Deputy RE
Communication
-To ensure the standards of safety and Quality are not compromised.
-To ensure the Contractor is following approved Method Statements.
-To review the Contractor’s short-term program, prioritize areas which require most attention and plan for the surveillance with the Inspectors.
-Following the C-L JV Quality Management System.
-Manage Contractor’s own time and prioritize effectively.
-Report accurately on events and findings from site visits and inspections through Daily reports.
-Review documents submitted to ensure they comply with safe working practices and the Employer’s Requirements.
-Observe and ensure safe working practices are maintained at all times.
-To stop with immediate effect, any activity that, in the judgment of the individual, constitutes an unacceptable risk to the safety of any person, or the environment.
-Performing in-process and accepting inspections of contractor's works, in areas of archl, civil & structural disciplines, on a monitoring basis and assisting in resolving any noted problems with the contractor's work at Main Terminal Building, Conc-A, B & C, Passenger Terminal Expansion (PTE-Saddlebag East & West & In-bound Baggage Handling Facility East & West) and lay-down area (particularly on Anchor Bolts upgrade & improvements and terrazzo/Interior Glazing.
-Carrying-out surveillance on safety, workmanship, 100% quality and schedule and assuring that results are in full compliance with contract requirements.
-Responsible in reviewing and understanding contractor’s weekly work plans.
-Ensure that the contractor coordinates the work with the works of other contractors. Act as Team Leader in Weekly Quality Assurance Tours whenever designated.
-Attending Quality Tour and meeting at different location every week to ensure compliance with Quality Assurance and Quality Control procedures. Attend periodic tours at the Contractor’s lay-down area to verify materials delivered are per approved material submittals and samples.
-Attends Weekly Terrazzo/Interior Glazing Cascade Meetings presided by the Lead Engineer.
-Attended mock-up inspections with the Designer and Client’s representatives.
Participates in Project Execution Conference Meetings chaired by Delivery Team Engineers.
-Prepared Weekly Leads Report on the Terrazzo/Interior Glazing section for the weekly QA Manager’s meeting whenever the Lead Engineer is on leave.
-Took the Acting Lead Engineer’s role, duties and responsibilities whenever Lead Engineer is on leave.
-Reviewing Method Statements, Inspection Test Plans & Project specifications to ensure compliance with the Contract requirements.
-Providing input to technical reviews of drawings, product data, material samples, inspection reports, contractor's shop drawings and technical data to assure compliance with the requirements of the contract.
-Completed Punch Works Training Feb 22, 2011.
-Completed Quality Management System (QMS) Training Feb 24, 2011.
-Completed Lock-Out/ Tag-Out of Hazardous Energy Sources-Critical Task Training Awareness Course Feb 28, 2011.
-Completed training on iPad usage in performing my day to day job from issuing ES&H Compliance Checks, Safety Action Notice & STARRT and reporting daily Contractor's activities.
-Completed Stairs & Handrails Training May 17, 2011.
-Active OBI Site Engineer People-Based Safety (PBS) practitioner at site.
-3-4 years Area Warden for 30 personnel in OBI Emergency Alert Exercise.
-Completed 140 Bechtel University Online Courses. & 170 Safety Training & Courses.
Oct 2005 - May 2010 • CP 14 - Airside/Landside Roadways and Parkings
-In charge in monitoring the progress of civil works on the construction of graded and asphalt roads and bridges either thru surveillance or witness basis and providing assistance in resolving any noted problems with the contractors work.
-Attending Interface & Coordination meetings together with other representatives of different Contract Packages.
-Responsible in witnessing the Geotechnical works which include material test sampling, compaction test (FDT - using sand cone & nuclear gauge), sub grade proof rolling & smoothness test, and Plate bearing.
-Inspection, Supervision & Testing 50-km roads including the 8-lanes 7.5km highways, 27-km perimeter roads and 27 bridges.
-Participating in ES&H Meeting, Site Engineers Meeting, Tool Box Meeting, In-House Training and On Line Bechtel University Course.
-Preparing and submitting daily report, compliance checks and progress report to Resident Engineer.
-Attending Interface & Coordination meetings together with other representatives of different Contract Packages.
-Managing and tracking Quality Action Notices (QANs) & Non Compliance Report
(NCRs) closure through CTI resolution.
-Undertake the responsibility of Senior Engineer during his leave or absence on site.
-Performing in-process and accepting inspections of contractor's works, in areas of arch, civil & structural disciplines, on a monitoring basis and assisting in resolving any noted problems with the contractor's work at Main Terminal Building, Con A, B & C, Passenger Terminal Expansion (PTE-Saddlebag East & West & In-bound Baggage Handling Facility East & West) and lay-down area (particularly on Anchor Bolts upgrade & improvements and terrazzo/Interior Glazing.
-Carrying-out surveillance on safety, workmanship, 100% quality and schedule and assuring that results are in full compliance with contract requirements.
-Responsible in reviewing and understanding contractor's weekly work plans.
-Ensuring that the contractor coordinates the work with the works of other contractors. -Act as Team Leader in Weekly Quality Assurance Tours whenever designated
-Attending Quality Tour and meeting at different location every week to ensure compliance with Quality Assurance and Quality Control procedures. Attend periodic tours at the Contractor's lay-down area to verify materials delivered are per approved material submittals and samples.
-Attends Weekly Terrazzo/Interior Glazing Cascade Meetings presided by the Lead Engineer.
-Attended mock-up inspections with the Designer and Client's representatives.
Participates in Project Execution Conference Meetings chaired by Delivery Team Engineers.
-Prepared Weekly Leads Report on the Terrazzo/Interior Glazing section for the weekly QA Manager's meeting whenever the Lead Engineer is on leave.
-Took the Acting Lead Engineer's role, duties and responsibilities whenever Lead Engineer is on leave.
-Reviewing Method Statements, Inspection Test Plans & Project specifications to ensure compliance with the Contract requirements.
-Providing input to technical reviews of drawings, product data, material samples,
inspection reports, contractor's shop drawings and technical data to assure
compliance with the requirements of the contract.
Perform in-process & accept inspections of contractor's works, in areas of archl, civil & structl disciplines, on a monitoring basis & assist in resolving any noted problems with the contractor's work at Main Terminal Bldg, Concourse A, B & C, Passenger Terminal Expansion (PTE-Saddlebag East & West & In-bound Baggage Handling Facility East & West) & laydown area (Anchor Bolts upgrade & improvements & terrazzo/Interior Glazing. Carry-out surveillance on safety, workmanship, 100% quality & schedule & assure results are in full compliance with contract rqmts. Review & understand contractor’s wkly work plans. Ensure contractor coordinates the work with works of other contractors. Act as Team Leader in Wkly Quality Assurance Tours whenever designated, attended 34 Quality Assurance Tours & prepare 18 Quality Tour Reports. Attend Quality Tour & meeting at different location every week to ensure compliance with Quality Assurance & Quality Control procedures. Attend periodic tours at Contractor’s laydown area to verify matls delivery are per approved matl submittals & samples. Attend Weekly Terrazzo/Interior Glazing Cascade Meetings presided by the Lead Engineer. Attend mock-up inspections with Designer & Client’s rep. Participates in Proj Execution Conf Mtgs chaired by Delivery Team Engr's. Prepare Wkly Leads Report on the Terrazzo/Interior Glazing section for the wkly QA Manager’s mtg whenever Lead Engineer is on leave. Act Lead Engr’s role, duties & responsibilities whenever Lead Engr is on leave. Ensure the “Zero Accident Policy” of Bechtel is always implemented. Conduct Environment, Safety & Health Compliance Checklist daily to ensure ES&H policies are strictly adhered too. Review Method Statements, Inspection Test Plans & Project specs to ensure compliance with the Contract rqmnts. Provide input to technical reviews of drwgs, product data, mat'l samples, inspection reports, contractor's shop drwgs & technical data to assure compliance with the rqmnts of the contract.
-In charge in monitoring the civil works on the construction of OBI Site Office,
Contractor labor camp & lay-down area. Supervising work closely to ensure that job done is in accordance with the contract requirements.
Responsible in witnessing the Geotechnical works which include material test sampling, compaction test (FDT - using sand cone & nuclear gauge), sub grade proof rolling & smoothness test, and Plate bearing.
Participating in ES&H Meeting, Site Engineers Meeting, Tool Box Meeting, In-House Training and On Line Bechtel University Course.
Preparing and submitting daily report, compliance checks and progress report to Resident Engineer.
Undertake the responsibility of Senior Engineer during his leave or absence on site.
PDO C31-0281 OMR2.67Million 61km Marmul R/A to Andhur / Harweel Junction Asphalt Road Construction
Report to QA/QC Manager.
Implement and monitor of Contract Quality Plan (CQP) requirements and assure compliances, revision if necessary of all contract specific procedures, work instructions, QCPs.
Periodic review of CQP for its adequacy and update the same if required.
Check approval of all necessary obtained documentation and inspection formats properly filled, signed-off by concerned.
Control quality documents and maintain distribution list.
Coordinate with client (PDO) and Test Laboratory.
Check daily inspection reports for correctness and completeness.
Ensure that inspection/testing equipments are with valid calibration.
Maintain Instrument Measuring and Testing Equipments (IMTE) log.
Maintain and update all quality related records/documents at site.
Prepare final documentation and test packs.
Organize internal audits and audits on sub-contractors activities and follow-up close-out of corrective actions.
-Upgrade the company HSE Plan to best implement client’s standard procedures and specifications as per health, safety and environment of all employees.
-Supervise the recording, analysis of information on injuries, damage and production loss, and assessment of accident trends and the review of overall safety performances. Disseminate the information regarding
learning points thru daily Tool-Box-Talks (TBT).
-Monitor the Journey Management Procedure and record the findings.
-Conducts HSE inspection and participate in HSE audits on established procedures/ equipment on a regular basis with all Site Supervisors as per HSE Plan. Prepare reports as required and monitor follow-up on corrective or preventive actions to ensure that safe working practices are in operation.
-Identify the potential hazards, which have not been identified and ensure that the controls are in place for inclusion in the hazard register before work commences.
-Ensure that the emergency equipment and procedures are adequate to take care of an emergency. Conduct regular drills and exercises to test these and the emergency response or personnel including Sub-contractors.
-Ensure that the personal protective equipment (PPE) is adequate, maintained and appropriate for use by the employees with respect to the specific job hazards.
-Arrange for Safety Flashes/ Alerts in the event of Near Misses/Incidents and advice on the preventive measures needed to avoid repetition of the event.
-Monitor the Safety Training Observation Program (STOP).
-Investigate all reported unsafe actions/Near Misses immediately.
-Provide topics for TBT and monitor participation by all VTC and Subcontractors personnel. Assist line management and supervisors in the presentation of toolbox talks when required.
-Advise Site Supervisor/Site Manager on Occupational Health hazards, suitability of protective clothing and validity of equipment from a safety viewpoint and hygiene issues.
Gulf Petrochemical Services & Trading LLC ¶ Quality Control Engineer Apr 2004 - Jul 2004
Harweel, Marmul, Sultnanate of Oman • PDO C31-0281 OMR2.67Million 61km Marmul R/A to Andhur / Harweel Junction Asphalt Road Construction
Report to QA/QC Manager.
Implement and monitor of Contract Quality Plan (CQP) requirements and assure compliances, revision if necessary of all contract specific procedures, work instructions, QCPs.
Periodic review of CQP for its adequacy and update the same if required.
Check approval of all necessary obtained documentation and inspection formats properly filled, signed-off by concerned.
Control quality documents and maintain distribution list.
Coordinate with client (PDO) and Test Laboratory.
Check daily inspection reports for correctness and completeness.
Ensure that inspection/testing equipments are with valid calibration.
Maintain Instrument Measuring and Testing Equipments (IMTE) log.
Maintain and update all quality related records/documents at site.
Prepare final documentation and test packs.
Organize internal audits and audits on sub-contractors activities and follow-up close-out of corrective actions.
-Upgrade the company HSE Plan to best implement client's standard procedures and specifications as per health, safety and environment of all employees.
-Monitor the Journey Management Procedure and record the findings.
-Conducts HSE inspection and participate in HSE audits on established procedures/ equipment on a regular basis with all Site Supervisors as per HSE Plan. Prepare reports as required and monitor follow-up on corrective or preventive actions to ensure that safe working practices are in operation.
-Identify the potential hazards, which have not been identified and ensure that the controls are in place for inclusion in the hazard register before work commences.
-Ensure that the emergency equipment and procedures are adequate to take care of an emergency. Conduct regular drills and exercises to test these and the emergency response or personnel including Sub-contractors.
-Ensure that the personal protective equipment (PPE) is adequate, maintained and appropriate for use by the employees with respect to the specific job hazards.
-Arrange for Safety Flashes/ Alerts in the event of Near Misses/Incidents and advice on the preventive measures needed to avoid repetition of the event.
-Monitor the Safety Training Observation Program (STOP)
-Investigate all reported unsafe actions/Near Misses immediately. Site Supervisor, Engineers, Supervisors & workers.
-Improve HSE awareness consciousness amongst all VTC personnel using standard training aids such as videos, posters, films, handouts, etc.
-Provide topics for TBT and monitor participation by all VTC and Subcontractors personnel. Assist line management and supervisors in the presentation of toolbox talks when required.
-Advise Site Supervisor/Site Manager on Occupational Health hazards, suitability of protective clothing and validity of equipment from a safety viewpoint and hygiene issues.
-Provide Weekly activities based on overall schedule.
-Chase Invoice percentile value with respect to on time payments.
-Ensure all pre-fabricated materials are available on a weekly basis. Provide list with the delivery date required at site.
-Provide details list of equipments/erection tools and tackles availability, dispatched/procured pending list on monthly basis.
-Provide list of status of total requirement of consumables at site on weekly basis.
-Monitor the contract scope of works. Ensure that all changes are adequately recorded and approved by Head Office (HO) any scope changes and get concurrences.
-Keep account of all petty cash. All DO’s and invoices purchased locally to be sent to HO.
-Coordinate regularly the need of manpower and equipments to HO.
-Ensure that Safety and Quality considerations are kept in line with company/client/statutory requirements based on the contractual responsibilities.
The Project Manager has overall responsibility for HSE within the Company and its operations.
In particular committed to:
-Provide adequate financial resources to enable the Company HSE Management system and procedures
implemention (i.e. Incentive Scheme for Camp/Worksite/Wshop Man-of-the-Month).
-Ensure that the Corporate HSE Policy is reviewed annually and that it is in line with the operational activities of the Company.
-Review results of incident reports and statistics.
-Chair the Corporate Management & Weekly/Monthly HSE Meetings.
-Demonstrate visible and transparent Senior Management commitment by visiting Company work locations and addressing employees and sub-contractors staff on HSE matters.
-Attend the Incident Review Committee as required.
-Prepare Daily Site Progress Report.
-Review Documentation Update, HSE Activities & Inspection Checklist, HSE Training/Medical & PDO Baseline Employment Matrix for Auditing purposes.
Quality Control. Ensure that ISO 9001 international standard for quality requirements are implemented and maintained. The quality plan and quality procedures shall be fully adopted, checked with periodical review and issue corrective action report. Responsible for ensuring corrective action is carried-out on all NCR's/CAR's.
Health, Safety & Environment. Monitor adherence of HSE Plan by all staff, crew and sub-contractors.
Scope of Work. Monitor all project work with respect to the contract scope of work. Notify to Vice- President (P) / Project Engineer (PE) any change of scope and get his concurrence. Ensure that all change is fully authorized by VP (P) / PE in writing.
Document Control. Implementation of the document control procedure. Ensure correct compilation of all document packages.
Project Reporting. Responsible for all projects planning and reporting at site.
Interface w/ Main Contractor/Customer. Responsible for all interfaces with contractors/customers at site.
-Provide Weekly activities based on overall schedule.
-Chase Invoice percentile value with respect to on time payments.
-Ensure all pre-fabricated materials are available on a weekly basis. Provide list with the delivery date required at site.
-Provide details list of equipments/erection tools and tackles availability, dispatched/procured pending list on monthly basis.
-Provide list of status of total requirement of consumables at site on weekly basis.
-Monitor the contract scope of works. Ensure that all changes are adequately recorded and approved by Head Office (HO) any scope changes and get concurrences.
-Keep account of all petty cash. All DO's and invoices purchased locally to be sent to HO.
-Coordinate regularly the need of manpower and equipments to HO.
-Ensure that Safety and Quality considerations are kept in line with company/client/statutory requirements based on the contractual responsibilities.
Marmul Contracting & Trading Co. LLC. ¶ Project Manager Nov 2000 - Dec 2001
P.O. Box 1233 Ruwi Postal Code 112 Sultanate of Oman • PDO C2K5019 Civil Aid Road Maintenance
The Project Manager has overall responsibility for HSE within the Company and its operations.
In particular committed to: -Provide adequate financial resources to enable the Company HSE Management system and procedures
implemention (i.e. Incentive Scheme for Camp/Worksite/Wshop Man-of-the-Month)
-Ensure that the Corporate HSE Policy is reviewed annually and that it is in line with the operational activities of the Company.
-Review results of incident reports and statistics.
-Chair the Corporate Management & Weekly/Monthly HSE Meetings.
-Demonstrate visible and transparent Senior Management commitment by visiting Company work locations and addressing employees and sub-contractors staff on HSE matters.
-Attend the Incident Review Committee as required.
-Prepare Daily Site Progress Report.
-Review Documentation Update, HSE Activities & Inspection Checklist, HSE Training/Medical & PDO Baseline Employment Matrix for Auditing purposes.
Marmul Contracting & Trading Co. LLC.
¶ Project Manager \[Nov 2000 - Dec 2001\]
P.O. Box 1233 Ruwi
Postal Code 112
Sultanate of Oman • PDO C2K5019 Civil Aid Road Maintenance
The Project Manager has overall responsibility for HSE within the Company and its operations.
In particular committed to:
-Provide adequate financial resources to enable the Company HSE Management system and procedures
implemention (i.e. Incentive Scheme for Camp/Worksite/Wshop Man-of-the-Month).
-Ensure that the Corporate HSE Policy is reviewed annually and that it is in line with the operational activities of the Company.
-Review results of incident reports and statistics.
-Chair the Corporate Management & Weekly/Monthly HSE Meetings.
-Demonstrate visible and transparent Senior Management commitment by visiting Company work locations and addressing employees and sub-contractors staff on HSE matters.
-Attend the Incident Review Committee as required.
-Prepare Daily Site Progress Report.
-Review Documentation Update, HSE Activities & Inspection Checklist, HSE Training/Medical & PDO Baseline Employment Matrix for Auditing purposes.
Petroleum Development Oman ¶ Construction & Maintenance Supervisor-Civil Engineer Nov 1987 - Nov 2000
OYO/IC4 Yibal P.O. Box 81 Muscat Sultanate of Oman • All North & All South PDO Concession Areas, Sultanate of Oman DCMEI/CMEI/EPC Service Contracts
Drilling Technical Supports
Graded & Asphalt Road Maintenance
Completed 70 Safety & Training Courses
Holding Technical Authority TA Level 3 (July 20, 1998)
Focal Point responsibility for 1999 HSE, Waste Management & Road Maintenance
Works carried-out in NORTH OMAN (1987-1991, 1998-2000)
(Fahud ECE/111 21/11/87 Yibal OYE/314/34 19/02/98 OYO/1C4 1/1/2000-01/11/2000)
Inspection, supervision and testing of all gravel road construction, repair and maintenance of drilling rigs location, airstrips, buildings, tank pad and bundwall foundations in a desert environment in particularly Fahud, Yibal, Qarn Alam and Lekhwair, Government Gas Plant & NGL Plants (Yibal) with DCMEI Service Contracts, etc.
Inspection, supervision and testing of all gravel road construction, repair and maintenance of drilling rigs location, airstrips, buildings, tank pad and bundwall foundations in a desert environment in particularly Fahud, Yibal, Qarn Alam and Lekhwair, Government Gas Plant & NGL Plants (Yibal) with DCMEI Service Contracts, etc. and oil/gas/waterline in gathering and production facilities, airstrips, building and tank pad foundations in a desert environment particularly in Marmul, Nimr, Rima and Bahja, etc. Supports in monitoring the activity and performance of construction Contractors on projects to ensure that work is carried out on time and to the required quality and optimum cost under CMEI Service Contracts.
-Checks the compliance of contractor to shop drawings, for prefabrication, fabrication, erection and installation works.
-Implement and ensure the agreed HSE and quality standards in engineering work. By personal example, actively promote HSE standards and awareness in contractor personnel, as well as participating in HSE inspections and audits on construction activities/contractor's logistic support facilities.
-Provide project management and civil engineering input for interior projects, Field Change Proposals and projects related to the follow-up of technical safety audits, including planning and budget management between various Operations Departments.
Manage operational assistance on request in earthwork supervision, planning, scheduling, inspection and testing (soil, concrete & asphalt) on maintenance of graded road system, airstrips and drilling rigs location.
-Process job order tenders to the CMEI contractors as per the new contract strategy, including preparation of tender packages, commercial evaluation of bids and job order award.
-Check and field verification of all Civil work, i.e. steel structure, roads, culvert, sanitary and oily sewers, etc. and building construction including finishing works.
-Prepare and/or check scopes/MTO
-Checks the compliance of contractor to shop drawings, for prefabrication, fabrication, erection and installation works.
-Provide project management and civil engineering input for interior projects, Field Change Proposals and projects related to the follow-up of technical safety audits, including planning and budget management between various Operations Departments.
Manage operational assistance on request in earthwork supervision, planning, scheduling, inspection and testing (soil, concrete & asphalt) on maintenance of graded road system, airstrips and drilling rigs location.
-Process job order tenders to the CMEI contractors as per the new contract strategy, including preparation of tender packages, commercial evaluation of bids and job order award.
-Check and field verification of all Civil work, i.e. steel structure, roads, culvert, sanitary and oily sewers, etc. and building construction including finishing works.
-Prepare and/or check scopes/MTO's of interior project construction packages and prepare/process material requisition etc., to ensure efficient and timely implementation.
-Checks, monitor and report site preparation and ensures the implementation of construction engineering standard documents including detailed procedures, method of statements and drawings, by Service Contractors.
-Liaise with all client departments to determine their work needs/priorities. Where critical activities exist, ensure that complete job packages are issued in timely manner to minimize shutdowns and/or avoid oil deferment.
-Ensure that each job order is correctly (technically and financially) closed-out on completion of the work, and that all unused materials related to projects are properly returned to store.
-Liaise on a day-to-day basis with the Area Engineering Planner and Quality Control to ensure proper execution of works.
Construction of Wurtsmith Elementary School Project at Clark Air Base under supervision of ROICC (US Navy).
-In charge in the efficient supervision of as Material Controller for all local and Imported materials.
-Provided technical solution to the field problems and discussed it with management and client. Final decision on the solution of such deficiency and other related duties that concerned project management.
-Liaison with Contractor's quality control field inspector regarding the implementation of changes required to specification or drawing as a result of unforeseen site conditions.
William Golangco Construction Corporation ¶ Material Control Engineer Aug 1985 - Jun 1986
US Clark Air Base, Pampanga Philippines • Construction of Wurtsmith Elementary School Project at Clark Air Base under supervision of ROICC (US Navy)
-In charge in the efficient supervision of as Material Controller for all local and Imported materials.
-Provided technical solution to the field problems and discussed it with management and client. Final decision on the solution of such deficiency and other related duties that concerned project management.
-Liaison with Contractor's quality control field inspector regarding the implementation of changes required to specification or drawing as a result of unforeseen site conditions.
MWK (Morrison-Wyatt-Knudsen) International Ltd., Inc. ¶ Quality Control Engineer Jun 1983 - Aug 1985
US Naval Facilities Expansion Berbera, Somalia East Africa • Construction of United States Naval Facilities Expansion
-Provide efficient & satisfactory day-to-day engineering, technical, testing results (soil & concrete) and progress reporting to Project Manager at its deep-water port & airfield project for the United States Department of Navy.
-Supports to dredging/underground surface material testing.
-In charge as Site Engineer in the construction of the building, roadway, pavements and underground utilities such as water and sewer lines and drainage.
-Responsible in preparing accomplishment reports and estimates of materials to be used in the construction.
-Coordination with materials and testing engineers for quality control of work performed.
-Liaising with ROICC (client) representatives as to the changes required to specification on drawings.
-Directing tasks to foremen and leadsmen on my area of responsibility.
-Provide efficient & satisfactory day-to-day engineering, technical, testing results (soil & concrete) and progress reporting to Project Manager at its deep-water port & airfield project for the United States Department of Navy.
-Supports to dredging/underground surface material testing.
-In charge as Site Engineer in the construction of the building, roadway, pavements and underground utilities such as water and sewer lines and drainage.
-Responsible in preparing accomplishment reports and estimates of materials to be used in the construction.
-Coordination with materials and testing engineers for quality control of work performed.
-Liaising with ROICC (client) representatives as to the changes required to specification on drawings.
-Directing tasks to foremen and leadsmen on my area of responsibility.
REA Saudi Arabia Ltd. Philipp Holzmann A.G. ¶ Junior Civil Engineer Sep 1981- Sep 1983
Riyadh/Taif Kingdom of Saudi Arabia • Cadet Civil Engineering jobs
-In charge in the supervision of all civil works on construction of asphalt roads, tanks foundations / bund-wall, airports, buildings renovation, aggregates and bitumen testing and office/drafting works such as laying out of foundation for masonry, carpentry works and related specification on architectural works.
-Required to prepare accomplishment reports, CPM chart on project, daily activities regarding manpower and scope of works.
• Junior Civil Engineer KSA 1981 - 1983
CAREER HISTORY
• Bachelor of Science in Civil Engineering (1974 - 1980) Mapua Institute of Technology (Philippines) • Licensure Examination for Civil Engineers, Philippines Professional Regulation Commission (PRC), Manila, Philippines