Mahmoud Hassan

Painting inspector for petropel co.

• Painting Inspector for Pipe-lines, Tanks and Steel
Structure
• Coordinate with contractors, subcontractors, and
client representatives during inspections.
• Provide technical guidance and support to the
project team on coating/painting quality
• requirements.
Act as the primary contact for third-party
inspections and audits related to coatings.
• Ensure proper calibration and functionality of
inspection and testing equipment such as: DFT
gauges, holiday detectors, adhesion testers, and
environmental monitoring tools.
• Maintain and update calibration certificates for
inspection equipment.
• Maintain detailed records of inspections, tests,
and quality observations.
• Prepare inspection reports, test results, and final
coating inspection documentation.
• Verify and compile quality dossiers for
coating/painting activities for project handover.

• Workshop Inspector painting, and Fire Proofing
Coating
• Implement and follow quality control procedures,
inspection test plans (ITPs), and checklists.
• Ensure all construction and fabrication activities
meet quality requirements and project standards.
• Identify non-conformities (NCRs) and oversee
corrective and preventive actions.
• Mechanical and Piping Inspection
• Maintained up-to-date inspection and audit
records for improved reporting and analysis.
• Prepared reports detailing findings of inspections,
investigations, and tests.
• Inspect and verify surface preparation processes,
including: Abrasive blasting, chemical cleaning,
or mechanical methods. Surface cleanliness
according to standards (e.g., BGAS, NACE, ISO) .
Surface profile measurements using tools like
replica tapes or surface comparators.
Inspection protocols
Project coordination
Field inspections

• Site Punch Points clearness
• Identify non-conformities (NCRs) and oversee
corrective and preventive actions.
Monitor and inspect all stages of coating
application, ensuring:
• Use of approved coatings, primers, and paints
per project specifications and manufacturer
datasheets.
• Correct mixing ratios, application techniques,
and pot life adherence.
• Appropriate thickness of coatings using dry film
thickness (DFT) gauges and wet film thickness
(WFT) tools.
• Compliance with curing times and conditions for
each coat.
• Structural Inspection
• Ensure all activities align with relevant codes,
standards, and specifications: Standards such as
BGAS, NACE, ISO 12944.
Project-specific quality requirements and client
specifications.
• Review and verify coating procedure
specifications (CPS) and inspection test plans
(ITP).

• Site and Workshop Inspector for insulation,
painting, and Fire Proofing Coating
• Inspect and verify incoming materials,
equipment, and consumables against project
specifications and purchase orders.
• Conduct non-destructive testing (NDT) such as
ultrasonic, radiographic, magnetic particle, and
dye penetrant testing, or coordinate with
certified NDT technicians.
• Check surface preparation, application of
coatings, and curing processes.
• Ensure compliance with standards such as BGAS,
NACE, or ISO 12944.

• Material Receiving, Pickling, Internal Blasting to
Achieve Clean Build Technology, Monitoring and
Expedite Painting Application and Touch-up
Activity, Surveillance, Daily and Several Quality
Reports, RFI and Presentation
• Identify and document non-conformities (NCRs)
during inspections.
• Coordinate with the construction team to resolve
quality issues through corrective actions.
• Prevent recurrence by recommending and
implementing preventive measures
• Ensure compliance with project QA/QC plans,
Inspection and Test Plans (ITPs), and procedures.
• Provide feedback and suggest improvements for
quality management systems (QMS).
• Monitor inspections to ensure adherence to HSE
standards.
• Report and address any unsafe practices during
mechanical works.
• Knowledge of quality management systems such
as ISO 9001 .
• Liaise with project management, construction
teams, subcontractors, and third-party inspectors.
• Check surface preparation, application of
coatings, and curing processes.
• Ensure compliance with standards such as BGAS,
NACE, or ISO 12944

• Inspect and verify surface preparation processes,
including: Abrasive blasting, chemical cleaning,
or mechanical methods.
Surface cleanliness according to standards
(e.g., BGAS, NACE, ISO).
Surface profile measurements using tools like
replica tapes or surface comparators.
• Ensure that contaminants (e.g., dust, grease,
salts) are removed and environmental conditions
(e.g., temperature, humidity, dew point) are
within acceptable limits.
Monitor and inspect all stages of coating
application, ensuring:
• Use of approved coatings, primers, and paints
per project specifications and manufacturer
datasheets.
• Correct mixing ratios, application techniques,
and pot life adherence.
• Appropriate thickness of coatings using dry film
thickness (DFT) gauges and wet film thickness
(WFT) tools.
• Compliance with curing times and conditions for
each coat.
• Ensure all activities align with relevant codes,
standards, and specifications.
Project-specific quality requirements and client
specifications.
• Review and verify coating procedure
specifications (CPS) and inspection test plans
(ITP).
• Verify batch certificates and materials
compliance with technical requirements

• Painting, Coating, and Insulation Inspector for
Internal Tanks Repairs & Concrete Floor Anti-Acid
Coating
• Prepared reports detailing findings of inspections,
investigations, and tests.
• Inspect and verify surface preparation processes,
including: Abrasive blasting, chemical cleaning,
or mechanical methods. Surface cleanliness
according to standards (e.g., BGAS, NACE, ISO).
Surface profile measurements using tools like
replica tapes or surface comparators.
• Ensure that contaminants (e.g., dust, grease,
salts) are removed and environmental conditions
(e.g., temperature, humidity, dew point) are
within acceptable limits.
Monitor and inspect all stages of coating
application, ensuring:
• Use of approved coatings, primers, and paints
per project specifications and manufacturer
datasheets.
• Correct mixing ratios, application techniques,
and pot life adherence.
• Appropriate thickness of coatings using dry film
thickness (DFT) gauges and wet film thickness
(WFT) tools.
• Compliance with curing times and conditions for
each coat.
• Ensure all activities align with relevant codes,
standards, and specifications. Project-specific
quality requirements and client specifications.
• Review and verify coating procedure
specifications (CPS) and inspection test plans
(ITP).
• Verify batch certificates and materials
compliance with technical requirements

• Painting Inspector ON-Shore + OFF-Shore
• Identify and document coating and painting
defects such as: Blistering, cracking, pinholes,
holidays, or overspray. Ensure environmental
conditions are suitable for painting and coating
applications:
• Monitor ambient temperature, relative humidity,
and dew point.
• Ensure compliance with standards and
manufacturer recommendations during
application and curing.
• Raise Non-Conformance Reports (NCRs) and
recommend corrective actions.
• Oversee rework and verify compliance
post-repair
Monitor and inspect all stages of coating
application, ensuring:
• Use of approved coatings, primers, and paints
per project specifications and manufacturer
datasheets.
• Correct mixing ratios, application techniques,
and pot life adherence.
• Appropriate thickness of coatings using dry film
thickness (DFT) gauges and wet film thickness
(WFT) tools.
• Compliance with curing times and conditions for
each coat.

senior quality control inspector for a painting & coating which made for steel
structure buildings beside final visual inspection for welding and material.
Shared in projects:-
Project Client main contractor contractor
Steel Structure for
Syrian Cement
Company
Syrian cement company Orascom NSF*
Steel Structure for
Sorfert fertilizers
Sorfert fertilizers
company
Orascom NSF
Steel structure for
terga power plant
company
Algerian ministry of
electricity
Orascom NSF
Ezz billet steel Ezz flat steel company Orascom NSF
Steel structure for
elsafwa cements
company.
Elsafwa cement
company
Orascom NSF
Elmerk pipe rack Petrofac Orascom NSF
6 October power plant
600 MW
Egyptian ministry of
electricity
Ansandlo Orascom
Elobor crossing bridge Egyptian armed forces Orascom NSF
Baiji gas power plant
6*160 MW
Republic of Iraq
ministry of electricity
Ansandlo Orascom
*NSF=national steel fabrication
2-Worked at Ceramica Cleopatra Group for 1 year and half.
As a “production quality inspector & planner
responsible for charging silos of press through plc. System formation
the design of tiles through plc. Follows up the production process
until finishing.
3-Worked at Misr Gulf oil processing Co in Q.C for 1 year.
As a lab shift chemist”.
Make all chemical tests occur for oil (acidity, peroxide, iodine, color,
the final product inspection and fill the quality control reports, which
needed for ISO certification.

• Senior Quality Control Inspector for a Painting &
Coating for Steel Structure Buildings, Welding
Visual and Material Inspection, in Projects: Syrian
Cement Company, Sorfert Fertilizers, Terga power
plant company, Ezz billet Steel, Elsafwa Cements
Company, Elmerk Pipe Rack, 6 October power
plant 600 MW, Elobor Crossing Bridge, Baiji Gas
Power Plant 6
• 160MW

• Responsible for Charging Silos of Press Through
PLC
• System Formation the Design of Tiles
• Follows up The production Process until Finishing