Majed Aljuhani

• Conducted work for both Saudi Aramco onshore/offshore projects.
• Spearheaded PID inspection compliance for over +10 offshore projects for (Jacket, PDMs, and Risers).
• Participated in project inspection meetings (kick-of, weekly quality, and special process) as per Saudi Aramco SCH Q requirements.
• Reviewed contractor’s transmittals of WPSs, method statements, and job procedures against applicable Aramco and international specifications and codes (SAEP-M-005, SAEP-324, ASME IX, and AWS D1.1)
• Performed all hold/witness/surveillance inspections of critical TKY joints in offshore jackets, production PDMs, fabricated piping spools, and risers pipelines, ensuring compliance with all applicable with Company/International Standards and codes.
• Led mechanical/welding/coating inspections of piping/pressure vessels in several vendors fabrication shops.
• Root Cause Analysis (RCA) of welding defects (e.g., Porosity, cracks, and excessive undercuts).
• Reduced weekly weld rejection rates (WRR) through proactive analysis of weekly contractor’s reports and corrective actions (e.g., welder retraining or removal) to ensure compliance with SAEP-324.
• Witnessed hydrostatic testing of pressure vessels and piping systems.
• Executed final walkthrough inspections of the offshore jacket and PDM and ensure compliance with all relevant standards and specifications prior to handover.
• Escalated LBEs and company violations if not solved within agreed ACD per SAEP-381 and SCH Q.

• Handled the quality inspections of three pressure vessels, process piping, and structural steel in accordance with ASME VIII Div.1, ASME B31.3, AWS D1.1, and client mandatory specifications.
• Collaborated with Saipem for stage inspection per the approved Inspection Test Plans (ITP).
• Performed visual fit-up and welding inspections for all assigned equipment and work.
• Oversaw critical hold points of PWHT processes, including thermocouple placements and reviews the chart for (heating/cooling rates, soak time), ensuring compliance with ASME Sec VIII and client approved procedure.
• Witnessed Positive material identification (PMI) test for Alloy verification as per ASME II part C and as per project ITP.
• Reviewed and verified U stamp name plates and MDRs as per ASME Sec VIII requirements.
• Authorized final Inspection Release Notification (IRNs) when releasing from vendors.

• Acted as SWPC’s Owner Engineer (OE) and QA/QC welding inspection authority.
• Led 20+ weekly quality/progress meetings with contractors, proactively identifying and addressing any quality concerns to avoid deviations from the requirements.
• Reviewed and approved contractor Welding Procedure Specifications (WPS) and witnessed Performance Qualification Test for welders in compliance with project specifications and ASME Sec. IX code.
• Provided oversight of quality activities on the project, such as mechanical, welding, or coating works for both contractors and sub-contractors, and offer technical support and guidance as needed.
• Conducted welding inspection on SDSS, DSS, Austenitic SS piping systems and welding/coating inspections on two ASTM A36 carbon steel water storage tanks.
• Checked Third Party RT film interpretation as per Construction code ASME B31.3 and ASME Sec V.
• Reviewed weekly welder rejection rate.
• Performed visual inspection of coating/blasting applications, including surface preparation, air compressor blotter test, salt contamination test, and DFT check to ensure meeting with project requirements.
• Verified contractor inspection data log (relative humidity, temperature) before start tanks coating.
• Ensured induction time and pot life are strictly followed per product data sheet.
• Approved weld maps, NDT summaries and reports, visual and dimensional inspection reports.
• 100% Witness picking and passivation and PMI tests for all stainless steel grades as per ASTM A380 and ASME Sec II part c, respectively.
• Raised NCRs when needed as per project specifications and applicable codes.
• Guaranteed seamless site works by enforcing strict compliance with project specs and quality requirements.

• Executed QC inspections in both new construction and shutdown/turnaround projects.
• Reviewed the project’s drawings and resolve discrepancies internally before submitted to client for approval.
• Conducted material receiving inspection in multiple projects’ materials and welding consumables, ensuring 100% compliance with their corresponding Material Test Certificate (MTC), ASME Sec II, and client specifications.
• Coordinated and oversaw projects welder qualification with a third-party agency in accordance with applicable qualification standards (ASME Sec. IX, AWS D 1.1 and client specifications/standards).
• Verified calibration and condition of baking, holding, and portable electrode ovens of the projects.
• Performed mechanical inspections, including fit-up and dimensional checks, in accordance with approved stage Inspection Test Plans (ITPs) and Issued For Constructions (IFCs) drawings.
• Critically Monitored all welding activities, including pre-weld, in-process, and post-weld inspections in accordance with applicable codes and standards and client mandatory requirements.
• Performed alterations and major repairs inspections on pressure vessels/drums/columns under NBIC-23, ASME Sec VIII, and API 510, including replacements of reinforced nozzles with bigger sizes/classes and install the inserting plates to replace corroded/cracked plates.
• Carried-out internal/external inspections on repairs of (columns, vessels, drums, and reactors).
• 100% Witnessed nozzles localized hydrostatic test of columns and vessels.
• Monitored NDT (UT/RT reports and films) uses in lieu of localized hydrostatic test when the client engineers/AI ASME Inspector decided to conduct in according to API 510 standard.
• Validated internal SS lining repairs via ASTM A380 copper sulfate tests, confirming iron-free materials and eliminating future corrosion risks.
• Witnessed all types of NDT (PT, MT, and UT) on BSR/ASR, and review RT results, ensuring the integrity of the weld.
• Monitored both full and localized PWHT and reviewed generated chart, to confirm the heating rate, soaking time, and cooling rate in compliance with approved PWHT procedures.
• Ensured all welding parameters are met in according to approved Welding Procedure Specifications (WPS) to ensure sound weld.
• Raised non-conformance reports (NCR) when applicable as per project specifications and applicable codes.
• Verified handling, storage, baking, and drying temperature of welding consumables in reference with approved project procedure.

• Supported QA/QC inspectors in conducting inspections as per project specifications, applicable codes, and standards.
• Verified welding equipment validity of certification.
• Reviewed 100% inspection documents and records, such as inspection reports and NDT results.
• Conducted material receiving inspection activities against ASME II Part A/B, Material Test Certificates (MTC) and approved IFC drawings.
• Performed daily facility surveillance to enforce usage of approved materials only.
• Executed 100% post-fabrication inspections to condition of materials (corrosion or dimensional inaccuracies)