Manjur Patel

1. Perform inspection of above-ground storage tanks (AST) during fabrication, erection, maintenance, and repair activities.
2. Verify materials used in tank construction comply with approved specifications and standards.
3. Review approved drawings, procedures, and inspection test plans (ITPs) before work commencement.
4. Conduct incoming material inspection and verify material traceability.
5. Perform visual inspection of tank foundations, bottom plates, shell plates, roof structures, and appurtenances.
6. Verify fit-up, alignment, plumbness, roundness, and dimensional tolerances during tank erection.
7. Monitor welding activities and ensure compliance with approved WPS, PQR, and applicable codes.
8. Inspect weld joints before, during, and after welding operations.
9. Verify welder qualifications and welding consumable control requirements.
10. Witness and coordinate Non-Destructive Testing (NDT) activities such as VT, MT, PT, UT, RT, MFL, and vacuum box testing.
11. Review NDT reports and ensure acceptance criteria are met.
12. Inspect shell-to-bottom, roof-to-shell, and nozzle weld connections.
13. Monitor repair welding activities and verify compliance with approved procedures.
14. Conduct hydrostatic test inspections and monitor tank filling operations.
15. Verify settlement readings during and after hydrostatic testing.
16. Inspect tank internals, floating roofs, seals, ladders, platforms, and safety accessories.
17. Ensure compliance with API 650, API 653, ASME, and client specifications.
18. Verify coating and surface preparation activities as per project requirements.
19. Monitor blasting, painting, and coating application processes.
20. Measure and record DFT, environmental conditions, and coating quality parameters.
21. Identify defects, non-conformities, and deviations from project requirements.
22. Prepare inspection reports and maintain accurate inspection records.
23. Raise NCRs and follow up on corrective and preventive actions.
24. Coordinate with contractors, clients, and third-party inspection agencies.
25. Participate in quality meetings and progress review discussions.
26. Ensure all inspections are carried out safely and in compliance with HSE requirements.
27. Verify completion of punch-list items before tank commissioning.
28. Assist in tank integrity assessments and fitness-for-service evaluations.
29. Support turnaround, shutdown, and maintenance inspection activities.
30. Prepare final inspection dossiers and quality documentation for project handover.

1. Perform inspection of above-ground storage tanks (AST) during fabrication, erection, maintenance, and repair activities.
2. Verify materials used in tank construction comply with approved specifications and standards.
3. Review approved drawings, procedures, and inspection test plans (ITPs) before work commencement.
4. Conduct incoming material inspection and verify material traceability.
5. Perform visual inspection of tank foundations, bottom plates, shell plates, roof structures, and appurtenances.
6. Verify fit-up, alignment, plumbness, roundness, and dimensional tolerances during tank erection.
7. Monitor welding activities and ensure compliance with approved WPS, PQR, and applicable codes.
8. Inspect weld joints before, during, and after welding operations.
9. Verify welder qualifications and welding consumable control requirements.
10. Witness and coordinate Non-Destructive Testing (NDT) activities such as VT, MT, PT, UT, RT, MFL, and vacuum box testing.
11. Review NDT reports and ensure acceptance criteria are met.
12. Inspect shell-to-bottom, roof-to-shell, and nozzle weld connections.
13. Monitor repair welding activities and verify compliance with approved procedures.
14. Conduct hydrostatic test inspections and monitor tank filling operations.
15. Verify settlement readings during and after hydrostatic testing.
16. Inspect tank internals, floating roofs, seals, ladders, platforms, and safety accessories.
17. Ensure compliance with API 650, API 653, ASME, and client specifications.
18. Verify coating and surface preparation activities as per project requirements.
19. Monitor blasting, painting, and coating application processes.
20. Measure and record DFT, environmental conditions, and coating quality parameters.
21. Identify defects, non-conformities, and deviations from project requirements.
22. Prepare inspection reports and maintain accurate inspection records.
23. Raise NCRs and follow up on corrective and preventive actions.
24. Coordinate with contractors, clients, and third-party inspection agencies.
25. Participate in quality meetings and progress review discussions.
26. Ensure all inspections are carried out safely and in compliance with HSE requirements.
27. Verify completion of punch-list items before tank commissioning.
28. Assist in tank integrity assessments and fitness-for-service evaluations.
29. Support turnaround, shutdown, and maintenance inspection activities.
30. Prepare final inspection dossiers and quality documentation for project handover.

1. Perform inspections of pressure vessels, storage tanks, piping systems, and related equipment in accordance with API standards.
2. Ensure compliance with API 510, API 570, API 653, and applicable industry codes and standards.
3. Review inspection plans, procedures, drawings, and technical specifications before inspection activities.
4. Conduct internal and external inspections of equipment to assess integrity and serviceability.
5. Evaluate corrosion, erosion, cracking, deformation, and other damage mechanisms.
6. Determine remaining life and fitness-for-service of equipment.
7. Verify material identification and traceability requirements.
8. Review welding procedures (WPS), procedure qualification records (PQR), and welder qualifications.
9. Witness and verify Non-Destructive Testing (NDT) activities including VT, PT, MT, UT, RT, and MFL.
10. Review and approve inspection and NDT reports.
11. Assess inspection findings against API acceptance criteria.
12. Prepare risk-based inspection (RBI) recommendations where applicable.
13. Identify and document defects, anomalies, and equipment deterioration.
14. Recommend repair, alteration, rerating, or replacement of equipment when required.
15. Verify repair activities comply with approved procedures and applicable codes.
16. Monitor hot work, maintenance, and shutdown inspection activities.
17. Perform thickness measurements and corrosion rate calculations.
18. Establish inspection intervals based on equipment condition and risk assessment.
19. Review pressure test, leak test, and hydrostatic test results.
20. Inspect storage tanks, foundations, shells, roofs, bottoms, and associated structures.
21. Evaluate pressure vessel components including shells, heads, nozzles, and supports.
22. Inspect piping systems, valves, flanges, supports, and attachments.
23. Ensure inspection records and documentation are accurate and complete.
24. Prepare detailed inspection reports with findings and recommendations.
25. Raise non-conformance reports (NCRs) and monitor corrective actions.
26. Coordinate with operations, maintenance, engineering, and quality departments.
27. Participate in turnaround, shutdown, and commissioning activities.
28. Ensure compliance with company quality, safety, and environmental requirements.
29. Maintain certification requirements and stay updated with API code revisions.
30. Provide technical guidance to clients and management regarding equipment integrity, reliability, and regulatory compliance.

 Set up and calibrate nondestructive testing equipment’s and Conduct tests to ensure quality or
detect discontinuities (defects) using NDT methods of inspection
 Establish techniques for proper examination of objects under inspection, ensuring strict
adherence to safety regulations.
 Apply testing criteria in accordance with applicable specifications or standards and evaluate
results.
 Involved as NDE Inspector with various projects performing RT, MT & PT on Pressure Vessels,
Pressure Piping, Tubes, Pipelines, Boiler Tubes, Heat exchangers, Turbines, Structures,
Equipment’s and related piping, Storage Tanks etc.
 Radiographic inspection on pipes, brackets, plates and base plate on boilers as well as pressure
vessels and Interpretation of radiographs. Film interpretation as per acceptance criteria and film
development in dark room.
 Organize and report test results
 Welding &Quality Control Inspection
 Carrying out Material Inspection, Dimensional and fit-up inspections, Weld Visual Inspection,
Welding Surveillance, Verify correctness of welding consumables and proper baking and storage
and Documentation as per different material standards.
 Set-up and calibrate NDT Equipment and to provide clear and concise NDT reports.
 Well versed with the following, Specification Standards and Procedures, working knowledge of
applicable industry codes and standards: (ASME, ANSI, API & BS EN) for QC & NDT Inspection of
Structural, piping, pipeline, etc. BS EN, ASME-II, V, VIII and IX, ASME/ ANSI B31.1, B31.3, B31.4
and B31.8, ASME B16, AWS D1.1, ASTM, API1104, and NACE etc.as applicable.
 Inspection of welding visually and using gauges.
 Inspection of joint fit-up and welding process.
 Reviewing of approved Welding procedure qualification (WPS) & Procedure qualification record
(PQR), carry out /witness the PQR & Welder Qualification Test (WQT).
 Familiar with Welding Processes like SMAW, GTAW, SAW, FCAW, GMAW and most used
materials like Carbon Steel, Low Temperature Carbon Steel, Stainless Steels and Alloy Steel etc.
 Familiar with Fabrication /Construction Drawings, Piping Isometrics drawings etc.
 Prepare all necessary Welding documents

1. Perform inspections of pressure vessels, storage tanks, piping systems, and related equipment in accordance with API standards.
2. Ensure compliance with API 510, API 570, API 653, and applicable industry codes and standards.
3. Review inspection plans, procedures, drawings, and technical specifications before inspection activities.
4. Conduct internal and external inspections of equipment to assess integrity and serviceability.
5. Evaluate corrosion, erosion, cracking, deformation, and other damage mechanisms.
6. Determine remaining life and fitness-for-service of equipment.
7. Verify material identification and traceability requirements.
8. Review welding procedures (WPS), procedure qualification records (PQR), and welder qualifications.
9. Witness and verify Non-Destructive Testing (NDT) activities including VT, PT, MT, UT, RT, and MFL.
10. Review and approve inspection and NDT reports.
11. Assess inspection findings against API acceptance criteria.
12. Prepare risk-based inspection (RBI) recommendations where applicable.
13. Identify and document defects, anomalies, and equipment deterioration.
14. Recommend repair, alteration, rerating, or replacement of equipment when required.
15. Verify repair activities comply with approved procedures and applicable codes.
16. Monitor hot work, maintenance, and shutdown inspection activities.
17. Perform thickness measurements and corrosion rate calculations.
18. Establish inspection intervals based on equipment condition and risk assessment.
19. Review pressure test, leak test, and hydrostatic test results.
20. Inspect storage tanks, foundations, shells, roofs, bottoms, and associated structures.
21. Evaluate pressure vessel components including shells, heads, nozzles, and supports.
22. Inspect piping systems, valves, flanges, supports, and attachments.
23. Ensure inspection records and documentation are accurate and complete.
24. Prepare detailed inspection reports with findings and recommendations.
25. Raise non-conformance reports (NCRs) and monitor corrective actions.
26. Coordinate with operations, maintenance, engineering, and quality departments.
27. Participate in turnaround, shutdown, and commissioning activities.
28. Ensure compliance with company quality, safety, and environmental requirements.
29. Maintain certification requirements and stay updated with API code revisions.
30. Provide technical guidance to clients and management regarding equipment integrity, reliability, and regulatory compliance.

1. Perform inspections of pressure vessels, storage tanks, piping systems, and related equipment in accordance with API standards.
2. Ensure compliance with API 510, API 570, API 653, and applicable industry codes and standards.
3. Review inspection plans, procedures, drawings, and technical specifications before inspection activities.
4. Conduct internal and external inspections of equipment to assess integrity and serviceability.
5. Evaluate corrosion, erosion, cracking, deformation, and other damage mechanisms.
6. Determine remaining life and fitness-for-service of equipment.
7. Verify material identification and traceability requirements.
8. Review welding procedures (WPS), procedure qualification records (PQR), and welder qualifications.
9. Witness and verify Non-Destructive Testing (NDT) activities including VT, PT, MT, UT, RT, and MFL.
10. Review and approve inspection and NDT reports.
11. Assess inspection findings against API acceptance criteria.
12. Prepare risk-based inspection (RBI) recommendations where applicable.
13. Identify and document defects, anomalies, and equipment deterioration.
14. Recommend repair, alteration, rerating, or replacement of equipment when required.
15. Verify repair activities comply with approved procedures and applicable codes.
16. Monitor hot work, maintenance, and shutdown inspection activities.
17. Perform thickness measurements and corrosion rate calculations.
18. Establish inspection intervals based on equipment condition and risk assessment.
19. Review pressure test, leak test, and hydrostatic test results.
20. Inspect storage tanks, foundations, shells, roofs, bottoms, and associated structures.
21. Evaluate pressure vessel components including shells, heads, nozzles, and supports.
22. Inspect piping systems, valves, flanges, supports, and attachments.
23. Ensure inspection records and documentation are accurate and complete.
24. Prepare detailed inspection reports with findings and recommendations.
25. Raise non-conformance reports (NCRs) and monitor corrective actions.
26. Coordinate with operations, maintenance, engineering, and quality departments.
27. Participate in turnaround, shutdown, and commissioning activities.
28. Ensure compliance with company quality, safety, and environmental requirements.
29. Maintain certification requirements and stay updated with API code revisions.
30. Provide technical guidance to clients and management regarding equipment integrity, reliability, and regulatory compliance.

Complete QC activities & compiled documentations of Projects records.
 Meeting clients and execution of NDT job as per requirements and satisfaction of clients/representative.
 Welding inspection with welder qualification and QC activities.
 Preparation of reports and co-ordination with the client representatives.
 Witnessing hydro test, vacuum-box testing, monitoring pre & post weld heat treatment.
 Interpretation & evaluation of radiographs, carrying out RT, UT, MPT, LPT, VT on ASME coded pressure
vessels and heat exchangers.
 Allied structures, storage tanks, power piping and process piping; visual inspection of fit-up, in-process
welding.
 pre & post weld inspection at various sites and co-ordination with third party inspectors,
preparation & maintaining reports at various projects.
 Method of statement & risk assessment, Preparing & verifying WPS & Welder Qualification Test based on
API 1104, AWS-D1.1.
 Ensure Piping and Mechanical ITP stages are followed and complied
 Review IFC P&IDs, ISOs & vessel drawings to ensure appropriate WPS are referenced with weld details
and overall accuracy.
 Monitor Piping and Mechanical operations and conduct required inspections work to resolve quality
related issues with workers, subcontractors, and the client
 Communicate with management, staff, and clients the requirements of qualitys scope of work.
 Verify that all site activities comply with the quality codes and standards.
 Coordinate with area sales group on all quality issues and distribute relevant QC/QA documentation to site
sub-contractors.
 Provide appropriate feedback to management regarding QA/QC matters. Develop inspection and test
programs. Timely completion of paperwork and piping and mechanical turnover binder.
 Coordinate quality site inspections with all site sub-contractors and vendors, coordinate all nondestructive
testing on site, and monitor the implementation of the approved site QC plan.
 Inspect / review product material, weld quality and testing to ensure compliance with code, standards,
specifications and QCM. With Witness all pressure testing; finalize testing documentation.
 Ensure all quality control documentation is compiled and competed in a timely matter meeting project
deadlines. Prepare regulatory documentation as required and provide to client.

• Perform inspection of Above Ground Storage Tanks (AST) including foundation, bottom plates,
shell courses, roof structures, and nozzles throughout fabrication, erection, and commissioning
stages.
• Conduct fit-up inspection, dimensional checks, and visual inspection during fabrication and
construction activities.
• Ensure welding activities are performed as per approved WPS, PQR, and applicable ASME/API
codes, including monitoring of root, hot pass, filling, and final welding stages.
• Coordinate and witness NDT activities (RT, UT, PT, MT) in accordance with approved ITPs and
project requirements.
• Review Material Test Certificates (MTC) to ensure material traceability, correctness, and
compliance with project specifications.
• Verify correct material identification, storage N handling at site in line with quality requirements.
• Inspect surface preparation and coating application as per project specifications and BGAS/SSPC
standards, including blasting, painting, DFT measurement, and repair activities.
• Ensure compliance with API 650 / API 653 standards and client specifications (Aramco, SABIC,
SATORP, SASREF).
• Perform corrosion inspection and monitor corrosion prevention systems including protective
coatings and surface protection systems.
• Support selection and verification of materials suitable for corrosive service environments and
operating conditions.
• Identify corrosion-related defects and recommend corrective and preventive actions to improve
asset integrity.
• Participate in root cause analysis (RCA) of material failures, corrosion issues, and quality
deviations.
• Ensure compliance with API 510, API 570, API 653, API 571, and API 580 inspection codes where
applicable.
• Support Risk Based Inspection (RBI) programs and asset integrity management activities.
• Prepare daily inspection reports, punch lists, and NCR documentation to maintain QA/QC records.
• Coordinate with client representatives, contractors, and project teams for hold points, witness
points, and inspection approvals.
• Support hydrotesting, final inspection, and mechanical completion activities prior to system
handover.