Marine Technician
Adnoc Logistics And Services
Total years of experience :11 years, 9 Months
Maintenance of SINGLE POINT MOORING A, B, C, OFFSHORE REPEATER TOWER Genset
Purpose Maintain marine equipment offshore Zirku Island as well as electrical installations on the Island Principal Accountabilities Electrical Mechanical and Instrumentation connected works on Loading Terminals and OSR
Coordinates with Supervisor for maintaining minimum stock of essential spares parts and materials to meet any eventualities
Offshore Installation LOADING TERMINALS SPMA SPM B SARB Electrical Hydraulic Installations Navigation Aids OFFSHORE REPEATER TOWER Diesel Power Generators Electrical Power Distribution System Navigation Aids NAVIGATIONAL AIDS INSTALLED OVER Channel Marker Buoys ZWDP PLATFORM Onshore Installation Zirku Jetty Nav Aids Shore Power for Marine Vessels Marine Shore Base Hose Test bench associated equipment EOT Cranes Responsibilities Scheduled maintenance works Weekly Monthly inspection and checking of equipment planning for major minor overhauling replacement programmers Trouble shooting and corrective maintenance Identifying failure components analyzing the causes and reporting to supervisor for permanent remedial measures Refurbishment of equipment and accessories Refurbishment of Diesel Generator Ventilation Blowers Pumps etc for OSR Generator House Refurbishment of Electrical Solenoid actuated Hydraulic skid Refurbishment of Nav aids like Fog horn navigation light taking care its character requirements Preparing Battery banks for periodical replacements or testing and accessing condition for remedial action replacement Maintain Solar panels improve support arrangements and inter connections during major maintenance activities Planning and preparing material requirements for Electrical Instrumentation jobs during major maintenance demobilizing mobilizing activities on SPMs OSR etc
Prepare material spare parts specification and provide support services to SR MAR MTN Supervisor for procurement activities
Carry out to inspection and checking on bought out items for conformity HSE Requirements Apply work permit procedures safety regulation for self and the team of personnel working for the same cause.
ELECTRICIAN
Abu Dhabi Oilfield Services (Sparrows)
Corniche road, Mussafah
Abu Dhabi, United Arab Emirates
(December 27, 2012 - up to present)
- Crane maintenance offshore
- MIPEG calibration
- Engine control troubleshooting
SHIPBUILDING / COMBAT SYSTEM
COMPONENT ELECTRICIAN
Abu Dhabi Ship Building Company
Mussafah Industrial Area
Abu Dhabi, United Arab Emirates
(July 26, 2010 up to December 11, 2012)
* Termination of the Following Panel / Console: * Helmsman Console / Damage Control Console / Engine Control Console (MTU) Bridge Control Console / Chilled Water Plant / IPMS Console (MTU) / MTS Engine Telegraph / KAMEWA WATERJET SYSTEM.
* Directly Involved in Commercial and Navy Ships Installing and Repairing of Shipboard Electrical Systems Including Identifying and Running Cable Connection.
* Termination of Electronic equipment aboard ship specializing in combat system equipment (i.e. Amphenol, rj45 connector, Nav Radar, Electronic Warfare / terminal block etc.)
* Making Cable Connection Including Water Tight for the new Constructions, Refit or Repair Project.
* Install / Hook up Power; Panel Board, Equipment Phones, Mounting Equipment and Lightings, Testing of Power System (Generators, Switch Board, Distribution and Breaker Panels)
* Testing of Inter-Communication Equipment, Main Engine and Auxiliary Monitoring System and other Electrical or Electronic Devices.
* Installation and Fabricated of Cable Tray for New Ship Cable Pulling such as: Disturber Cable, Degaussing Cable, Sensitive Cable and Neutral Cable and also Gland and Termination / Connectorization of Cable.
* Testing of Power System (Generators, Switch Board, Distribution and Breaker Panels
* Practice the Tool Box Talk before Commencement at any Work Area.
Industrial Electrician / Marine electrician
JERSA INDUTRIAL & MARINE CORP.
Herma Shipyard Industrial Complex
January 26, 2010 - July 20, 2010
* Point to Point Line checking from Device to Junction Box / Junction Box to Marshalling Cabinet.
* Cable Pulling, Installation of Electrical Equipment such as: Power Distribution / Motor Control / Intercommunication / Conduiting.
* Fire Alarm Installed and Connect Tested New Electrical Equipment / Electrical Motors.
* Conduct Insulation Test in all Electric Motor / Generators / Blower and Power Cables.
* Cleaning Baking / Varnishing of Winding / Replace Bearing and Testing of all Motor and Generators as Witness by Chief Engineer and the Owners representative.
* Check and maintain all Types of Inside and Outside Wiring and Conduits.
* Termination of Lights / Control / Motors / Switches
Point to Point Line checking from Device to Junction Box / Junction Box to Marshalling Cabinet.
Cable Pulling, Installation of Electrical Equipment such as: Power Distribution / Motor Control / Intercommunication / Conduiting.
Fire Alarm Installed and Connect Tested New Electrical Equipment / Electrical Motors.
Conduct Insulation Test in all Electric Motor / Generators / Blower and Power Cables.
Cleaning Baking / Varnishing of Winding / Replace Bearing and Testing of all Motor and Generators as Witness by Chief Engineer and the Owners representative.
Check and maintain all Types of Inside and Outside Wiring and Conduits.
Termination of Lights / Control / Motors / Switches
On-the-job training
Practice Electrical Construction and Maintenance, Including Mounting of Electrical Panels, Cable Pulling and Installation of all Sizes of Electrical Conduit, Cables, Wires, Switches, and Pole line Construction.
Knowledge of Occupational hazards and necessary Safety Precaution s.
Assembly of Panel Board and Switch Gear.
Carry out Rewinding of Electrical Motors and Transformers.
Performs Routine checks of Electrical Equipment Including Daily Check of Lighting, Indicators, Motor Controllers, and Wiring.
Laying and Pulling Cable from Main Switch Board to all Machines / Motor Controller and Magnetic Starter.
Loop Checking / Insulation Testing / Marking and Termination if Necessary.
Conduct Insulation Test in all Electric Motor / Generators / Blower and Power Cables.
Checks all Controllers / Starter / Breakers / and Replace Defective Fuse / Wire if Necessary.
Fabrication and Installation of Wire Ways / Cable Trays / Emergency and Normal Lights AC/DC Supply Manual Call Points.
Industrial Electrician / Marine Electrician
ROUVIA ROAD YACHT DESIGN
BEZ Mariveles, Bataan
March 9, 2009 - December 23, 2009
* Laying and Pulling Cable from Main Switch Board to all Machines / Motor Controller and Magnetic Starter.
* Loop Checking / Insulation Testing / Marking and Termination if Necessary.
* Conduct Insulation Test in all Electric Motor / Generators / Blower and Power Cables.
* Checks all Controllers / Starter / Breakers / and Replace Defective Fuse / Wire if Necessary.
* Fabrication and Installation of Wire Ways / Cable Trays / Emergency and Normal Lights AC/DC Supply Manual Call Points.
Laying and Pulling Cable from Main Switch Board to all Machines / Motor Controller and Magnetic Starter.
Loop Checking / Insulation Testing / Marking and Termination if Necessary.
Conduct Insulation Test in all Electric Motor / Generators / Blower and Power Cables.
Checks all Controllers / Starter / Breakers / and Replace Defective Fuse / Wire if Necessary.
Fabrication and Installation of Wire Ways / Cable Trays / Emergency and Normal Lights AC/DC Supply Manual Call Points.
Industrial Electrician / Marine electrician
HERMA SHIPYARD INC.
Herma Shipyard Industrial Complex
BEZ Mariveles, Bataan
February 11, 2008 - March 5, 2009
ON-THE-JOB-TRAINING
Industrial Electrician / Marine electrician
HERMA SHIPYARD INC.
Herma Shipyard Industrial Complex
BEZ Mariveles, Bataan
June 26, 2007 - December 3, 2007
* Practice Electrical Construction and Maintenance, Including Mounting of Electrical Panels, Cable Pulling and Installation of all Sizes of Electrical Conduit, Cables, Wires, Switches, and Pole line Construction.
* Knowledge of Occupational hazards and necessary Safety Precaution s.
* Assembly of Panel Board and Switch Gear.
* Carry out Rewinding of Electrical Motors and Transformers.
* Performs Routine checks of Electrical Equipment Including Daily Check of Lighting, Indicators, Motor Controllers, and Wiring.
NONE
Occupation: Housewife
Person to contact: Herlene Almamento
In case of emergency (+971507438257)
I hereby certify that the above information are true and correct to the best of my knowledge and belief.
Applicant
2004 - 2008 BATAAN PENINSULA STATE UNIVERSITY (Main Campus) Capitol Compound Balanga City, Bataan Bachelor of Science in Industrial Technology Major in Electrical
2000 - 2004 MARIVELES NATIONAL HIGH SCHOOL Barangay Poblacion, Mariveles, Bataan Secondary Education
1996 - 2000 ANTONIO G. LLAMAS ELEMENTARY SCHOOL Barangay Poblacion, Mariveles, Bataan Primary Education