Mechanical Tech. 1/ fabrication supervisor
Maaden Phosphate company
مجموع سنوات الخبرة :24 years, 10 أشهر
► performing walk down on area assign SAP sulfuric acid plant, preparing the preventive maintenance procedure or SMP-standard maintenance procedure each equipment, preparing checklist weekly and monthly, attending location of P&IDs, attending training WSP- work safety procedure, confine space and preparing Job Safety analysis (JSA), working at height, radiation training, excavation permit, authorized level-gas test, hot work permit at work permit receiver, attending training for LTT-lock out and tag out procedures, (PSST) preventive standard safety talk, Support company's program in implementing the full awareness of safety and health hazard .
► performing a central maintenance in whole area. PAP-Phosphoric acid plant, SAP- sulfuric acid plant, PAU-power and utility, MH-material handling, BENE-beneficiation upstream wet, (SOC)- sorter conveyor, POC-primary crusher in mining area, Act on problems concerning spare parts unavailability and also conduct modified equipments if needed in plans, As a member of maintenance Receives verbal or written instructions from Supervisor, obtains requirements for work and permits to work and proceeds to worksite to carry out the job, Complies with all PPE, safety and fire rules and regulations, including the use of protective clothing and equipment. Maintains work locations in a clean and tidy condition at all times, including removal of wastes and spillages. Also responsible for the efficient operation and equipment. evaluates, troubleshoots, research and developed possible ways to maintain the efficiency of all machinery's.
► As a member maintenance workshop department performing to Overhauling, Evaluates, repair, all kinds of equipment and machinery's in all area. As a member, imparting learned and effective preventive maintenance planning, cost efficient use of all consumable and fixed industrial materials as needed by the system.
► Performing as a in-charge for fabrication department in Beneficiation upstream workshop Department, performing all kinds of fabrication job structural, piping modification, all kinds of fabrication in needed to every area and department, performing also shutdown support all kinds of welding and fabrication job, including the issuer and receiver permit (confine space/hot, cold work).
►support management for any safety 5's, safety issue awareness, hemaya and company program.
► As team team member maintenance department performing to Overhauling, Evaluates, repair, and troubleshoot to all machinery's in hotmill area PQF mill-(Premium Quality Fine), CTP mill(Cone Type Piercer), MTB (Mandrel Trust Block), Mandrel Furnace/Gearbox Drive, Cooling Bed Area, BPA (Billet Process Area), Graphyte lubrication System, all Lubrication Oil System and GLS (Grease Lubrication System), including the Pre Finishhig Area(layer saw mach., scraf bin, straihtenner mach., Dedusting mach., Tuboscope/Amalog mch., Marking mach., all Roller conveyor machine, inlcuding all Hydraulic System and Finishing Area, Also conduct regular monitoring, regular applying lubrication and inspection of all equipments and machines including the daily checklist, weekly, monthly report.
► research and developed possible ways to maintain the efficiency of all machinery's.
► Support company's program in implementing the full awareness of safety and health hazard . Act on problems concerning spare parts unavailability and also conduct modified equipments if needed in plans, also conduct all kind of Fabrication works.
► As a member, imparting learned and effective preventive maintenance planning, cost efficient use of all consumable and fixed industrial materials as needed by the system. Also responsible for the efficient operation and equipment. evaluates, troubleshoots and report breakdown of machineries, maintain records, monitoring all machineries during operation.
As team leader in-charge to organized all maintenance crew and fabricator, Overhauling, Evaluates, repair, and troubleshoot machinery's, Also conduct regular monitoring and inspection of all equipments and machines. Prepare maintenance schedule and fabrication of all technical personnel. Plans, research and developed possible ways to maintain the efficiency of all machinery's. Check and summarize maintenance reports daily, weekly, and monthly submitted by all technical personnel as well as their accomplishments and submit to engineering head in-charge. Support company's program in implementing the full awareness of safety and health hazard for the staff. Act on problems concerning spare parts unavailability.and i will work with my crew and alone if needed defense of the situation. also conduct modified and build new equipments if needed in plan
Duties and Responsibilities
► Operation and maintenance of High Energy 9MeV Linear Accelerator X-ray System; Siemens and Allen Bradley SCADA system, 100Tons capacity hydraulic pack lifting system. Remote controllers using intranet within the Cargo X-ray System; Building Management System (BMS) and Repairing & Overhauling of all Gear Box Drives.
► As a team member of the maintenance department, imparting learned and effective preventive maintenance planning, cost efficient use of all consumable and fixed industrial materials as needed by the system. Also responsible for the efficient operation and maintenance of all facilities and equipment. Ensures complete manning of shifting staff, evaluates, troubleshoots and report breakdown of machineries, maintain records, monitor operating parameters of the equipment.
► Also conduct fabrication system.
► Siemens mobicT8 wireless control and monitor operator.
► Canduct of Fabricator
► Performed: Intallation and Commissioning all Gantry X-ray Project
SEMINARS ATTENDED
Siemens Simatic S7 System Handling Course
Course: Short course on basic PLC Programming of Siemens Simatic S7
Location: EG&G Middle East Branch Office- Dammam- KSA
Date: Feb. 08 to 16, 2006
Duties and Responsibilities
► Overhauling of various machineries.
► Evaluates, repair, and troubleshoot machineries; Also conduct regular monitoring and inspection of all equipments.
► Prepare maintenance schedule of all technical personnel.
► Plans, research, and developed possible ways to maintain the efficiency of all machineries.
► Check maintenance reports submitted by all technical personnel as well as their accomplishments.
► Support company's program in implementing the full awareness of safety and health hazard for the staff.
► Act on problems concerning spare parts unavailability.
SEMINARS ATTENDED
VICKERS & EATON - Fluid Power Industrial Hydraulic Visual Aids
Course: Troubleshoots, evaluates of principles of hydraulic, symbols, setting, formula and set-up hydraulic basic component system, specification of all pumps, flow and controls, pressure setting, directional symbols of valve, accessories of hydraulic system, in/T connection, to make and understand schematic diagram, sequence for operation and layout, and preventive maintenance.
Location: Head Office/ Oriental Tin Can & Metal Sheet Mfg. - Philippines
Date: Sept. 24 to Oct. 06, 2005
Duties and Responsibilities
► Conduct planning, research and develop all the machine such as; Printing Line or Lithography Machine, Seamer, Pneumatic Press Machine, Machine shop Machine Lathe/ Milling/ Grinding Precision Machine (External/ internal and surface), Vertical/ horizontal shaper machine, NC Universal milling machine, CNC & VTC Machine, Drilling Universal Press Machine, Gear Horber Manual Machine, Palletizer, Manual Press Machine Cantrack, Conveyor, Oven, Counter Machine, Vacuum Machine, Coolant and Water Pump Motor, Hydraulic Pump (Vane Pump -12V&24V, Gear Pump, Bent/ In-Line Axis Piston Pump, Variable Displacement Pump), Compressor, Hydraulic Press Machine, Gear Box Drives and Coil Cutting Machine.
► Daily monitor, checking and filling of grease and oil lubrication of machine tank.
► Also conduct overhauling.
Duties and Responsibilities
► Maintain the excellent condition of all machines such as; Manual Press Machine, Pneumatic Press Machine, Manual Seamer, Cantrack, Conveyor, Counter Machine, Vacuum, Compressor, and Oven.
► Also conduct troubleshooting and overhauling of all machineries being used on the production.
► Die setter and assembler.
► Provide proper scheduling for overhauling and maintenance of all machineries.
► Checked on lubrication schedule.
Duties and Responsibilities
► Check, repair and troubleshoot of machineries.
► Work as a Lubman. Checking and regular refilling of all grease and oil lubrication.
► Preserve and maintain good condition of all machineries such as; Injection Machine, Manual Press Machine, Hydraulic Press, Seamer, Welding (mig wire) Machine, Coil Cutter Machine, Vacuum, Compressor, Oven, Conveyor, Expander Machine, Bender Machine (pipe), Mixer Machine, Pipe Cutter Machine, Pump Machine, Machine Shop Machine Lathe, Milling, and Grinder.
► Also conduct overhauling of various machineries.
SEMINARS ATTENDED
ISO 9002
Course: Basic Quality Control Tools/ Quality Improvement Circle
Location: Head Office/ Carparts Manufacturing Inc. - Philippines
Date: November 1995
Under Graduate