martin kasyoki

❖ Coordinate day-to-day maintenance activities across 14 branches to ensure operational
continuity of workshop equipment and facilities.
❖ Developed and maintain the first comprehensive equipment asset register covering all
workshop equipment across 14 branches.
❖ Coordinate preventive and corrective maintenance activities for vehicle lifts, compressors,
pneumatic systems, hydraulic equipment, and workshop infrastructure.
❖ Work closely with branch supervisors, team leaders and technicians to schedule maintenance
activities and minimize operational disruptions.
❖ Conduct inspections, troubleshooting, repairs, and compliance checks on workshop
equipment and facility systems.
❖ Maintain maintenance records, service reports, equipment histories, and spare parts tracking
documentation.
❖ Support contractor activities, equipment servicing, and vendor coordination for specialized
maintenance works.
❖ Monitor equipment condition, identify reliability improvement opportunities, and recommend
corrective actions.
❖ Ensure compliance with company HSE requirements, safety procedures, and operational
standards.
❖ Assist with procurement requests for maintenance materials, spare parts, and workshop
equipment requirements.

❖ Increased equipment uptime from approximately 60% to 95% through implementation of
preventive and predictive maintenance programs.
❖ Improved plant reliability by over 80% within the first three months by introducing structured
maintenance planning and equipment reliability initiatives.
❖ Reduced maintenance turnaround time by more than 70% through effective spare parts
management and CMMS implementation.
❖ Eliminated recurring equipment failures through root cause analysis (RCA) and long-term
corrective actions.
❖ Reduced generator fuel consumption by over 80% through optimization of power systems and
plant utilities.
❖ Successfully overhauled borehole pumping systems and irrigation infrastructure supporting
over 800 acres of operations.
Management & Leadership Responsibilities
❖ Coordinated day-to-day maintenance operations for plant utilities, production equipment,
water systems, HVAC, generators, compressors, and supporting infrastructure
❖ Maintained contractor documentation, service reports, quotations, invoices, and procurement
records to support operational and financial controls.
❖ Supported equipment installation, commissioning, handover, testing, and documentation
activities, including operating manuals and technical records.
❖ Supervised maintenance technicians, contractors, and external service providers to ensure safe
and efficient execution of maintenance activities.
❖ Developed maintenance schedules, work orders, shutdown plans, and equipment reliability
improvement programs.
❖ Coordinated maintenance activities with production, quality, and operations departments to
minimize downtime and maximize plant availability.
❖ Trained and mentored maintenance personnel on troubleshooting procedures, equipment
maintenance, and safety practices.
❖ Led continuous improvement initiatives focused on reliability, energy efficiency, and
maintenance cost reduction.
Asset Management & Spare Parts Control
❖ Managed maintenance inventory, spare parts procurement, supplier selection, and stock
control for critical plant equipment.
❖ Forecasted spare parts requirements and maintained optimal inventory levels to prevent
equipment downtime.
❖ Prepared technical specifications and purchase requisitions for pumps, motors, compressors,
bearings, seals, gearboxes, electrical components, and plant utilities.
❖ Evaluated vendor quotations and coordinated procurement activities to ensure timely
availability of maintenance materials and services.
❖ Implemented CMMS-based maintenance tracking and spare parts management systems to
improve planning and cost control.
Mechanical Maintenance Responsibilities
❖ Managed maintenance and repair activities for pumps, compressors, boilers, HVAC systems,
generators, water treatment equipment, and facility utilities.
❖ Directed troubleshooting, overhaul, alignment, and repair of rotating equipment including
pumps, motors, bearings, seals, couplings, and gear-driven systems.
❖ Performed root cause analysis and condition monitoring to improve equipment reliability and
reduce recurring failures.
❖ Supported installation, commissioning, testing, and modification of plant equipment and
utility systems.
❖ Performed maintenance and repairs on company trucks, tractors, excavators, forklifts, motor
graders, motorcycles, Tuktuks, pickups, and SUVs.
Health, Safety & Environmental (HSE) Responsibilities

❖ Ensured compliance with HSE policies, permit-to-work procedures, risk assessments, and
plant safety standards.
❖ Conducted safety inspections, toolbox talks, and hazard identification activities to maintain a
safe working environment.
❖ Led incident investigations and implemented corrective actions to prevent recurrence.
❖ Maintained compliance with environmental regulations, operational procedures, and quality
management requirements.

❖ Performed preventive and corrective maintenance on water pumping systems,
borehole pumps, motors, piping networks, valves, automotive fleet, and
mechanical equipment.
❖ Diagnosed mechanical faults and carried out repairs on rotating equipment
including centrifugal pumps, motors, couplings, bearings, seals, and gear
driven systems.
❖ Conducted equipment inspections, alignment checks, vibration monitoring,
and condition assessments to improve reliability and reduce breakdowns.
❖ Executed pump overhauls, bearing replacement, seal replacement, and
mechanical component refurbishment activities.
❖ Maintained maintenance records and supported planning activities through
computerized maintenance management systems (CMMS).
❖ Coordinated maintenance activities with operations personnel to minimize
plant downtime and ensure continuous water supply operations.

❖ Performed preventive and corrective maintenance on water pumping systems,
borehole pumps, motors, piping networks, valves, and associated mechanical
equipment.
❖ Diagnosed mechanical faults and carried out repairs on rotating equipment
including centrifugal pumps, motors, couplings, bearings, seals, and gear
driven systems.
❖ Conducted equipment inspections, alignment checks, vibration monitoring,
and condition assessments to improve reliability and reduce breakdowns.
❖ Executed pump overhauls, bearing replacement, seal replacement, and
mechanical component refurbishment activities.
❖ Maintained maintenance records and supported planning activities through
computerized maintenance management systems (CMMS).
❖ Coordinated maintenance activities with operations personnel to minimize
plant downtime and ensure continuous water supply operations.

❖ Performed preventive and corrective mechanical maintenance on heavy-duty
transport trucks and fleet equipment, ensuring reliability for long-distance
operations.
❖ Diagnosed and repaired mechanical faults in engines, chassis components, and
structural assemblies to minimize vehicle downtime.
❖ Conducted inspections of mechanical systems, welded joints, and structural
components to ensure compliance with operational and safety standards.
❖ Assisted in mechanical modifications and equipment upgrades to meet
specialized transport requirements and improve fleet functionality.
❖ Supported the implementation of preventive maintenance schedules to extend
equipment lifespan and improve fleet availability.
❖ Collaborated with engineering and maintenance teams to troubleshoot
mechanical issues and optimize maintenance procedures.

❖ Assisted engineers and technicians in performing operations for CNC
machines in machining components such as milling, turning, boring, and
gear cutting, which are used in making automotive components and
machine parts.
❖ Assisted in performing metal fabrication and machining operations, which
involve cutting, shaping, and assembling components and structural parts
of machines.

❖ Assisted in foundry operations, which involve melting metals, casting, and
making molds for making ferrous and non-ferrous components.
❖ Assisted in interpreting engineering diagrams, blueprints, and computer
aided designs for performing machining, fabrication, and component
manufacturing operations.
❖ Assisted in inspection and quality control of machined components by
checking their dimensions and ensuring their compliance with technical
specifications.
❖ Assisted in metallurgical testing and analysis of materials for verifying
their composition and properties.
❖ Assisted in maintaining and troubleshooting machines in the workshop to
ensure continuous production operations for machined components.
❖ Assisted in design and development of components of machines using
computer-aided design and computer-aided manufacturing tools and
engineering design software packages.
❖ Maintained technical documentation for components manufactured and
engineering designs developed in the workshop.

❖ Assisted engineers and technicians in performing operations for CNC
machines in machining components such as milling, turning, boring, and
gear cutting, which are used in making automotive components and
machine parts.
❖ Assisted in performing metal fabrication and machining operations, which
involve cutting, shaping, and assembling components and structural parts
of machines.
❖ Assisted in foundry operations, which involve melting metals, casting, and
making molds for making ferrous and non-ferrous components.
❖ Assisted in interpreting engineering diagrams, blueprints, and computer
aided designs for performing machining, fabrication, and component
manufacturing operations.
❖ Assisted in inspection and quality control of machined components by
checking their dimensions and ensuring their compliance with technical
specifications.
❖ Assisted in metallurgical testing and analysis of materials for verifying
their composition and properties.
❖ Assisted in maintaining and troubleshooting machines in the workshop to
ensure continuous production operations for machined components.
❖ Assisted in design and development of components of machines using
computer-aided design and computer-aided manufacturing tools and
engineering design software packages.
❖ Maintained technical documentation for components manufactured and
engineering designs developed in the workshop.

❖ Assisted in the assembly, inspection, and maintenance of commercial
vehicles as well as heavy-duty automotive systems, supporting maintenance
activities in the workshop.
❖ Assisted in the diagnosis, repair, and maintenance of mechanical systems of
vehicles, including engines, transmissions, suspensions, as well as braking
systems.
❖ Assisted service technicians in the servicing of vehicles, changing of parts,
and ensuring service standards are met.
❖ Assisted in mechanical fabrication and welding activities, particularly in the
modification of vehicles as well as repairs.
❖ Assisted in inspections of equipment as well as vehicles, ensuring proper
functionality as well as safety.
❖ Assisted in documentation activities, including service reports, repair
records, as well as technical inspections.

❖ Gained hands-on experience in fabrication and welding through various
industry projects.
❖ Performed automobile maintenance and repair, enhancing troubleshooting and
mechanical skills. Participated in boiler and plant operations, learning safety protocols and
operational efficiency. Developed project teamwork skills by collaborating on
month-long projects across different industries. Engaged in machine shop activities, including lathe operation, milling, and
CNC machining. Designed and manufactured power supply circuits, applying electrical
engineering principles. Conducted material testing using destructive and non-destructive methods to
assess material integrity. Acquired carpentry and plumbing skills through practical projects, broadening
technical expertise.