medhat ali

JOB TITLE: Testing And Commissioning Manager.
• Experience in installation, testing and commissioning of electric work, high voltage and medium voltage switchgears.
• Experience in trouble shooting in protection and control schemes trouble shooting in operating equipment’s and devices.
• Skill in operation of static and digital relays, human man interface knowledge to communicate to relays by manual and computer operated software methods to change the operating setting as per system requirements.
• Collect project master schedule from planning department.
• Plan optimum resources (Man, Machine/Equipment, and Method) for the project.
• Coordinate with client for mobilization of T & C team to project site.
• Check from client the action points of pre-mobilization (Technical & Safety) inspection reports.
• Collect all drawing of the project necessary for T & C activities.
• Prepare three week look ahead schedule as per the site situation.
• Ensure all engineers follow safety & work permit requirements during the T& C activities.
• Ensure understanding of work plan by all engineers.
• Ensure that engineering are clear about the allocated budget man-days for assigned activities.
• Ensure use of calibrated equipment for all T & C activities.
• Ensure proper handling and storage of equipment by engineers during after work activities.
• Ensure strict supervision, control and monitoring of project activities.
• Ensure the completion of all work activities as per budget man-days and record delays if any.
• Take immediate steps to resolve any unforeseen problem that occurs during the T & C activity and inform to site manager and area projects manger immediately for proper action and protocol.
• Plan utilization of the manpower for some other useful and productive activity if unforeseen problem needs time for solution.
• Prepare the recovery plan for the delay in the activity due to unforeseen problem and try his best to complete the activity on or before schedule.
• Highlight the problems of his subordinate staff to the site manager / area project managers.
• Submit lessons learned at the completion of each project.
• Define a method to get improvement suggestions from his engineers.

JOB TITLE: Lead Electrical Engineer.
Al-Gihaz Industrial Project Unit (IPU)
Upgrade Power Transmission System at Saudi Aramco (SAOO).
• Assumed the responsibility of Lead Electrical Engineer at Al-Gihaz Company in AlGihaz Industrial Project Business Unit. Such multitasked role includes dialogue with clientele, preparation for basic and detail design of 50%, 90% and IFC Packages, review of detail design 50%, 90% and IFC packages, technical requirements, preparation of material take-off (MTO) and material requirements, review of vendor technical offers, vendor and client meetings, review of purchase requisitions (PR), preparation of technical bid evaluations (TBE), technical appraisals (TA) and material submittals, review of all nonmaterial requirements packages (NMR's) and interconnection diagrams along with the cable schedules, red line and mark-up drawings, involved in the planning schedule for activity preparation and finalization, shutdown schedule preparation, bidding meetings, site visits and material take off (MTO), Involved in new projects site visit, estimation.
• Preparation of Red line drawing as per the site condition.
• Coordination with vender in case of equipment failure.
• Preparation of Request for Inspection (RFIs) for Material receiving.
• Excellent Knowledge in Saudi Aramco Standards such SAMSS, SAES, SATIP, SATR, SAIC.
• To supervise the testing and commissioning work in 69KV & 115KV substation in all areas of Gas Oil Separation Plant (GOSP) and Water Injection Plant(WIP) in North, Central and South Ghawar in Saudi Aramco.
• Design review, procurement, resource management, Risk management, cost management.
• Planning for Partial Shutdown or cutover (Total Shutdown).
• Coordination with ARAMCO team, PMT, PSED, POD (Power+ Relay) plant Maintenance.
• Presenting the planning prior to the shutdown and progress review meeting with Saudi ARAMCO team.
• Comply with the Saudi ARAMCO procedure and standards of Safety, QAQC, work permit etc. during execution period.
• Testing of outdoor Switchyard equipment’s, Dead Tank Circuit Breakers ( DTCB), Insulator switch, Earth, Switches, ( motor operated & hand operated) 115KV tubular bus bar, Free Standing CT, CVT, Surge, arrestors, Circuit Switcher etc.
• Testing& commissioning breaker control protection panel, Transformer protection panel, line protection panel, downstream incomer panel of (13.8KV & 4.16KV), of MCCB 400/220 V, ACDB & DCDB panels, modification work, Testing of SEL 487-E, SEL 311L, SEL 451-5 & SEL 751 type relays.
• Preparation of Energization as per Aramco standards and test reports.

JOB TITLE: Senior Commissioning Engineer.
• Prepare & review the site test procedure and test sheet formats.
• Coordinate with the testing and commissioning subcontractors and supervise them during work execution.
• Prepare the testing schedules and energization procedure.
• Supervise Installation, testing and Commissioning for EHV, HV and MV substations
• Performing Scheme design developing and modification.
• Supervise Installation, testing and commissioning for different types of latest Protection, inter -tripping and fault recording Equipment.
• Supervise Installation & testing all types of protection relays (distance, differential), bus bar and transformer stability test.
• Carry out all required function and scheme check tests for different manufactures schemes.
• Scheme Check for Relay panels & Bus bar protection panel.
• Prepare the procedure for Tr. & B/B stability and perform the Tr. & B/B stability test.
• Supervise Installation, testing and commissioning of 380, 132, 33 & 13.8kV Control Panels, Scheme Check.
• Supervise Installation, testing and commissioning of 380, 132, 33 & 13.8kV Relay Panels, Scheme Check.
• Supervise the termination of control and protection panel.
• Perform interfacing check & over all interlocking check.
• Carry out function check for AVC, ABTS system.
• Carry out all tests for power cables testing & commissioning works.
• Carry out all tests on transformer, C.T, V.T, C.B Like (Primary injection test, Secondary injection test, Winding resistance test, Polarity test, Knee point test, Ratio test & Resistance test) and Switchgear equipment.
• Supervise Installation, testing and commissioning for new installation in the area substations reinforcement.
• Supervise Installation, testing and commissioning of Digital Energy Meter (ABB).
• Supervise Installation, testing and commissioning of Synchronizing panel and scheme Check.
• Supervise Installation, testing and commissioning of Load Shedding Panel & SCADA Interface Panels.
• Supervise Installation, testing and commissioning of Power Factor correction in SOA (Automatic Capacitor Control System) ACCS.
• Perform Configuration for Sequence of Events Recorder (SER) & Fault Recorder (FR) and apply testing by injection.
• Officially visited various substations in southern region of K.S.A. for the preparation of modification in protection Scheme of existing substation.

JOB TITLE: Testing and Commissioning Engineer
• Installing and testing protection relays in transformers substations 220/66/11kv.
• Supervised assembly and erection to completion of outdoor 220/66/11kv equipment, control and protection system.
• Doing the basic tests for new transformers substations and put it in service.
• Testing and calibration of measuring instruments like voltmeters, amp meters, power meters, frequency meters, PF meters, power recorder, energy meters and transducers.
• Design and testing of inter looking schemes, control and alarm schemes, synchronizing schemes, voltage regulating schemes, bus bar schemes and breaker failure schemes.
• Calculating operating and setting values for protection relays.
• Maintaining and designing control circuits for any part in transformers substation (i.e. power transformers, circuit breakers, isolators, compressors ….etc).
• Working on the operating programs for the digital relays such as ABB, SIEMENS, AREVA, SEL and GE.
• Testing power transformers (winding insulation, ratio test, D.C. resistance test and vector group test).
• Testing circuit breakers (measuring contact resistance, measuring closing and tripping time and measuring circuit breaker insulation).
• Testing current transformers (insulation test, saturation test (magnetic curve), polarity test and ratio test).
• Testing voltage transformers (insulation test, and ratio test).
• Testing the protection relays in the transformer power substations with the device tester as (Manta - Sverker - fregaa300 - Omicron - Isa - Q.Z).
• Working in construction the distance, over current, differential protection relays in the transformer power substation such as ( AREVA MicomP441, P442, P143, P120, P632, P631…. - SEL311c - SIEMENS 7SA610, 7SA611, 7UT612, 7SJ600, 7SJ602 - G.EDTP - ABB REL511, REL316*4, REF542, RET615 transformer protection, RET521v2.3 transformer protection - A/R - SPAD340c - KBCH120 - KCGG142 - MICRO MHO - L8 - LH1W - RD110 - RAZFE - R30 - D202 - FAULT RECORDER (HATHAWAY)).
• Testing and commissioning all distance protection Relays and power transformer commissioning in Kafr Elzayat substation (500) KV.
• Witness upon two Companies (EGEMAC & SIEMENS) in Kafr Elzayat substation (500/220/66) KV.
• Bus bar and Breaker fail scheme ( EHV & HV substations).
• Transformer & Generator feeder scheme, Stability & Sensitivity test, AVR panel scheme, load shedding panel scheme Auto Bus Transfer scheem, downstream incomer scheme, Capacitor bank scheme, Aux. Transformer scheme.