ميلبيرت Puson

Assure the Quality Standards as per Project Specification, Performs initial in-progress and final inspections on preventive and corrective maintenance work orders, Performs on the spot corrections while conducting in-progress inspections, Ensures repairs and alterations to remedy inspection violations are accomplished according to required industry code(s), Uses As-Built plans, Approved Drawings, blueprints, and schematics as references to perform inspections, Auditing of field work by subcontractors, performance of specific inspections and tests, and audit report preparation, Performs site visits during each phase of construction (initial through final) to conduct inspections, Follow-up as needed to perform additional inspections during each phase of construction (initial through final), Receives supervision from higher level QA/QC personnel, Maintain the Environmental Team Individual Training Folders and places in Quality Management System (QMS), Conducts materials testing and analysis, using tools and equipment and applying technical knowledge necessary to conduct test, Inspects in-progress and completed work for quality workmanship and safety, Prepares reports detailing test conducted and results, Proactively reviews contractor plans to ensure insure the materials and procedures will pass quality testing, Reviews materials to be used prior to the start of work, To implement the Inspection Activities in accordance with Quality Control Plan, Approved ITP Procedure, Standard, Approved Drawings, Project Specification and Project Requirements, Makes on the spot corrections (Safety and Quality) on repairs and installations during in progress inspections, Perform Planned Inspections and Test as per relevant approved Inspection and Test Plans and liaise with Site Engineers and Supervisors Staff of the Engineer regarding Inspection Requests, arrangements, inspections and Test Results, Conduct Internal Inspection prior to notify Request for Inspection (RFI) or Inspection Notification (IN) and Generate Client Inspection Notification (IN) or Request for Inspection (RFI) to the client when the status of the preliminary inspection is satisfactory to ensure compliance to Project Specification requirements and obtain their approval, Perform and attend all necessary inspection as identified in the approval inspection test plan, Review and Evaluate certificate of materials, material data sheets & specification, certificate of compliance and test certificate that will meet as per Project Requirements and Project Specification prior to its final acceptance, Conduct Material Inspections and verify materials as received as per purchase order, Delivery Note, approvals, Material Approval Request, Material Test Certificate, Certificate of Compliance and from approved vendor that compliance with all applicable codes, standards, and specifications,

, Review and Evaluate certificate of materials, material data sheets & specification, certificate of compliance and test certificate that will meet as per Project Requirements and Project Specification prior to its final acceptance, Conduct Material Inspections and verify materials as received as per purchase order, Delivery Note, approvals, Material Approval Request, Material Test Certificate, Certificate of Compliance and from approved vendor that compliance with all applicable codes, standards, and specifications, Conduct in-house inspection in coordination with the Project Engineer to ensure that all corrective actions necessary from the said inspection are perform promptly by Site Engineer and Site Supervisor prior for submission of Inspection, Performs continuous surveillance of assigned construction activities to ensure compliance with all applicable codes, standards, and specifications, Supervises the operation of the electrical works, wiring, grounding system, testing, Circuit Integrity, Cable installation and termination from and to, installation of conduits, cable trays, Electrical Equipment, , and adherence to statutory and Clients Regulations, Log in all observed non- conformances in daily surveillance report and shall coordinate with the Construction Team for implementation of timely corrective measures, Identify and Issue Non Conformance Report (NCR) items which is not acceptable and do not meet as per Standard, Approved IFC Drawing and Project Specification, Ensure that Non-Conformance Report (NCR) are raised once the activities deviated from the Contract Specifications or normal construction industry practice, Monitoring Non-conforming products under areas of their responsibility and support Site Engineer in their closure, Issued on the Log Book Entry the violations committed by the Construction Department, Prepare punch list during final state of project and close the items after complete the punch item, Maintain a record of Job Specification or Acceptance Log criteria of items which cover the inspection, Witness and Conduct Tests activities at Site pertain to Electrical activities to determine if work has been done in accordance with contract specification, Inspect the production quality to establish if the client requirements are being achieved, Provide support and advice to the construction personnel in relation to the project quality program, Verify the site activities to ensure that all works will be done as per applicable standards and approved IFC Drawings, Performs other duties as assigned, Prepare and Checking for the proper documentation for Testing package folders, and Dossiers for Handover of the Projects.

Prepares reports detailing test conducted and results, Proactively reviews contractor plans to ensure insure the materials and procedures will pass quality testing, Reviews materials to be used prior to the start of work, To implement the Inspection Activities in accordance with Quality Control Plan, Approved ITP Procedure, Standard, Approved Drawings, Project Specification and Project Requirements, Makes on the spot corrections (Safety and Quality) on repairs and installations during in progress inspections, Perform Planned Inspections and Test as per relevant approved Inspection and Test Plans and liaise with Site Engineers and Supervisors Staff of the Engineer regarding Inspection Requests, arrangements, inspections and Test Results, Conduct Internal Inspection prior to notify Request for Inspection (RFI) or Inspection Notification (IN) and Generate Client Inspection Notification (IN) or Request for Inspection (RFI) to the client when the status of the preliminary inspection is satisfactory to ensure compliance to Project Specification requirements and obtain their approval, Perform and attend all necessary inspection as identified in the approval inspection test plan, Review and Evaluate certificate of materials, material data sheets & specification, certificate of compliance and test certificate that will meet as per Project Requirements and Project Specification prior to its final acceptance, Conduct Material Inspections and verify materials as received as per purchase order, Delivery Note, approvals, Material Approval Request, Material Test Certificate, Certificate of Compliance and from approved vendor that compliance with all applicable codes, standards, and specifications, Conduct in-house inspection in coordination with the Project Engineer to ensure that all corrective actions necessary from the said inspection are perform promptly by Site Engineer and Site Supervisor prior for submission of Inspection, Performs continuous surveillance of assigned construction activities to ensure compliance with all applicable codes, standards, and specifications,

Monitoring and oversee Electrical Engineering Projects at Construction Site, Resolving issues and ensuring that the work is completed according to specifications, Make ensure that the plan and the work are completed according to local and national electrical codes, Determine schedules in collaboration with subcontractors to ensure that the electrical works is completed in tandem with the other element of the Project, Manage Construction schedules related to electrical elements of job sites, Assist construction project as needed on location technical support, Ensuring projects meets agreed specifications, budgets or timescales, Supervise site construction activities and site implementation, Provide technical advice and solving problems in site, Checking approved drawings and design to ensure that they are followed correctly in site, , Witness and Conduct Tests activities at Site pertain to Electrical activities to determine if work has been done in accordance with contract specification, Inspect the production quality to establish if the client requirements are being achieved, Performs duties related directly to the operatio0nal aspects of the Department, Conduct Internal Inspection prior to notify Request for Inspection (RFI) or Inspection Notification (IN) and Generate Client Inspection Notification (IN) or Request for Inspection (RFI) to the client when the status of the preliminary inspection is satisfactory to ensure compliance to Project Specification requirements and obtain their approval, , Reviews materials to be used prior to the start of work, To implement the Inspection Activities in accordance with Quality Control Plan, Approved ITP Procedure, Standard, Approved Drawings, Project Specification and Project Requirements, Performs other duties as assigned.

construction, installation, electrical systems, fixtures, apparatus, and participates in the more difficult work, Trains and instructs subordinates on detailed procedures, Conducts periodic inspections and gives on-site supervision over hazardous or unusual work assignments; assures availability of equipment, materials, and supplies, Estimates the time and material costs required for projected jobs; keeps cost and job records and submits reports; initiates requisitions for supplies, tools, and equipment, Supervises the operation of the electrical work for high rise building like slaving, wiring, Grounding system, testing, termination from and to, installation of conduits and cable trays for LV systems, Enforces safety regulations, rules, and working conditions, Recruits and trains personnel in the safe operation of equipment and tools.
Know and explain the electrical drawings to the electrician, Conduct toolbox meeting prior to execute work on site.

Inspect electrical systems, equipment, and components to identify hazards, defects, and the need for adjustment or repair, and to ensure compliance with codes, Test electrical systems and continuity of circuits in electrical wiring, equipment, and fixtures, using testing devices such as ohmmeters to ensure compatibility and safety of system, Removes defective electrical devices from system, decontaminates, disassembles, and replaces defective parts, using hand tools.

Confer with engineers, customers, and others to discuss existing or potential engineering projects and products, Design, implement, maintain, and improve electrical instruments, equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes., Operate computer- assisted engineering and design software and equipment to perform engineering tasks, Direct and coordinate manufacturing, construction, installation, maintenance, support, documentation, and testing activities to Ensure compliance with specifications, codes, and customer requirements, Inspect completed installations and observe operations, to ensure conformance to design and equipment specifications and compliance with Operational and safety standards.