Mechanical Engineer/Maintenance Engineer
VARIOUS COMPANIES IN UAE AND PHILIPPINES
Total years of experience :29 years, 6 Months
Thirty (30) years of work experience in position of various companies, supervised and managed all technical aspects of construction projects, in the field of Mechanical Engineering, Design, Estimation,
Installation and Maintenance Works (12 years in U.A.E.).
• As part of Engineering/Technical Department, I follow all aspects of Mechanical, Plumbing, Electrical Works of the company projects, deal with owner, consultant, contractor, sub contractors and suppliers.
• Direct supervise the site engineer, supervisor, foreman and the workforce on the field of construction site. Maintain and develop production at target schedules and activities. Does
different problem solving.
• Actively responding to project correspondence and obtain Client’s consultant, representative, engineers, architects and clients approval.
• Does responsible for Construction/Maintenances of all facilities from water supply pipings, sewerage. Drainage system, lights, electrical, plumbing, fit out works, etc.
• Make and prepare mechanical and plumbing estimation and material take off, inquiry. Receiving quotation, procurement and arrange timely delivery from respective suppler. Make material requisition prior to project completion date. In charge of site coordination, operation and manpower requirements.
• Prepare work schedule, manpower & equipment schedule and prepared method of procedure reports for various stages of construction.
• Work in Judicial Department, Police, Army and Air force of UAE (CMW) Command of Military Works.
Maintenance Engineer at our ADARCH marble factory, Mussafah, UAE, does various maintenance works on facilities, equipment, water supply, drainage system, repair machines and different power tools.
Appointed as Project Engineer/Mechanical Engineer for ABU DHABI ARCH various projects in UAE.
March 2017- March 2019
• Approval for ADDC Water & Electricity, Maintenance works and Hand over to client for Khoory Villa. MBZC, UAE
• Fit out, MEP works, ADDC Approval and Hand over to client for Al Zaabi Villa, Shamka, Abu Dhabi, UAE
• Fit out, MEP works for Al Hamadi Villa, Baniyas, Abu Dhabi, UAE
• Construction, Fit out, MEP works, ADDC Approval and Hand over to client for Murtadha’s Al Hashmi Villa, MBZC, UAE
October 2016- February 2017
• Maintenance Engineer at our ADARCH marble factory, Mussafah, UAE, does various maintenance works on facilities, equipment, water supply, drainage system, repair machines and different power tools.
July 2015-September 2016
• Project Engineer/MEP/Mechanical Engineer- AL QUDRA HOLDINGS BLDG., Ministry Area, Salam Road, Abu Dhabi, UAE -in charge of construction, fit out of various offices, marble works on lift lobbies, ground floor, parking areas. MEP works
And Hand over to client.
December 1-December 30, 2015
• Plumbing, drainage system, water supply, sanitary wares & fixtures and accessories at Mr. Jamal JLA Residence Villa, Palm Jumeirah, Dubai, UAE
February 2015- June 2015
• Maintenance Engineer at our ADARCH marble factory, Mussafah, UAE, operated chamfering/profile machines for marbles & granites, does various maintenance works on facilities, equipments, water supply, and drainage system of our factory site.
March 2014 - December 2014
• Project Engineer/Mechanical Engineer- SCONES BAKERY & CAFÉ, Al Maqta, Abu Dhabi, UAE-in charge of construction, fit out works, marble works, MEP works and Hand over to client.
July 2015-September 2016
• Project Engineer/MEP/Mechanical Engineer- AL QUDRA HOLDINGS BLDG., Ministry Area, Salam Road, Abu Dhabi, UAE -in charge of construction, fit out of various offices, marble works on lift lobbies, ground floor, parking areas. MEP works
And Hand over to client.
July 2015-September 2016
• Project Engineer/MEP/Mechanical Engineer- AL QUDRA HOLDINGS BLDG., Ministry Area, Salam Road, Abu Dhabi, UAE -in charge of construction, fit out of various offices, marble works on lift lobbies, ground floor, parking areas. MEP works
And Hand over to client.
December 1-December 30, 2015
• Plumbing, drainage system, water supply, sanitary wares & fixtures and accessories at Mr. Jamal JLA Residence Villa, Palm Jumeirah, Dubai, UAE
February 2015- June 2015
• Maintenance Engineer at our ADARCH marble factory, Mussafah, UAE, operated chamfering/profile machines for marbles & granites, does various maintenance works on facilities, equipments, water supply, and drainage system of our factory site.
March 2014 - December 2014
• Project Engineer/Mechanical Engineer- SCONES BAKERY & CAFÉ, Al Maqta, Abu Dhabi, UAE-in charge of construction, fit out works, marble works, MEP works and Hand over to client.
February 2015- June 2015
• Maintenance Engineer at our ADARCH marble factory, Mussafah, UAE, operated chamfering/profile machines for marbles & granites, does various maintenance works on facilities, equipment's, water supply, and drainage system of our factory site.
As part of Engineering/Technical Department, I follow all aspects of Mechanical, Plumbing, Electrical Works of the company projects, deal with owner, consultant, contractor, sub contractors and suppliers.
•Direct supervise the site engineer, supervisor, foreman and the workforce on the field of construction site. Maintain and develop production at target schedules and activities. Does
different problem solving.
•Actively responding to project correspondence and obtain Client’s consultant, representative, engineers, architects and clients approval.
•Does responsible for Construction/Maintenances of all facilities from water supply pipings, sewerage. Drainage system, lights, electrical, plumbing, fit out works, etc.
•Make and prepare mechanical and plumbing estimation and material take off, inquiry. Receiving quotation, procurement and arrange timely delivery from respective suppler. Make material requisition prior to project completion date. In charge of site coordination, operation and manpower requirements.
•Prepare work schedule, manpower & equipment schedule and prepared method of procedure reports for various stages of construction.
•Work in Judicial Department, Police, Army and Air force of UAE (CMW) Command of Military Works.
MECHANICAL ENGINEER / MEP/ HEAD MAINTENANCE ENGINEER
Abu Dhabi ARCH General Contracting LLC.
COMMAND OF MILITARY WORKS (CMW), GHQ, AL AIN
26 December, 2011 UP TO March 2014
• KHALIFA AIR FORCE AND AIR DEFENCE COLLEGE, AL AIN
• ZAYED SECOND MILITARY SCHOOL, MEZYED CAMP, AL AIN
• LEWA AL DHAFRAH CAMP, AL AIN
• REGIMENT 42 CAMP, AL AIN
• MILITARY HIGH SCHOOL, 43 CAMP, AL AIN
• REGIMENT 44 CAMP, AL AIN
• BORDER GUARD, ZAABA, AL WAGAN CAMP
• SEA BORDER GUARD, UM GAFA CAMP
• AL TOWAISA CAMP, AL AIN
• RADAR STATION, JEBEL HAFEET CAMP, AL AIN
a.)Directly supervise the site engineer, foreman, supervisor and the workforce on the field
of construction site. Maintain and develop production at target schedules and activities.
b.) Actively responding to project correspondence and obtain Command of Military Works
Consultants, engineers and client’s approval.
c.) Fully responsible in charge for 2 and half years as Maintenance Engineer, lead a team at different
Military Sites to carry and independently all related schedules, activities, complains from offices,
accommodations, stores, mess, kitchens, gymnasiums, training & other areas and guide all personnel
In technical works on right direction as per the standardization. Does responsible for maintenance of
all facilities from water supply, sewerage/drainage system, lights, electrical, plumbing etc.
d.) Make & prepare Mechanical/ Electrical/ Plumbing Estimation, Costing and Material Take Off,
inquiry / receiving quotation, procurement and arrange timely delivery from respective suppliers.
e.) Safety and coordination with Contractor, Consultant’s, Clients and all trades for project
implementations as per the Specifications, Shop Drawings and Site condition.
f.) Make material requisition prior to project completion date.
g.) In-charge of Site Coordination, Operations and manpower requirements.
Direct supervision for Tank Cleaning; repair of leaks and re-bottoming
Of Bunker Fuel Storage Tank No.8 (15 ft. dia. X 18 ft. ht.
RENOVATION OF BATHROOMS & PANTRIES @ WING No. 7, 9 & 11
Abu Dhabi ARCH General Contracting LLC.
ABU DHABI JUDICIAL DEPARTMENT, JUDICIAL COURT
ABU DHABI, UAE
1 October, 2011- 24 December, 2011
Direct supervision, inspections, coordination's to clients and consultants. Supervise and control of labors
in achieving progress and productivity in constructions. Does project planning and scheduling of activities,
monitor the sub-contractors, works for conformance with the specifications. Does inspections of works
at appropriate stages to ensure the quality and standard. Coordinate with all trades for the proper implementation
of Mechanical/ Electrical & Civil works in accordance to the plans and specifications.
PROJECT ENGINEER/MECHANICAL ENGINEER
Abu Dhabi ARCH General Contracting LLC.
SKYWAY COFFEE SHOP
PENTHOUSE FLOOR AREA, SALAM STREET,
ABU DHABI, UAE
18 July 2011- 30 September, 2011
Managed, performs supervision, does proper planning on the erection, installation of sewage, drainage
system/ plumbing works including water supply connection, lights and fixtures, sanitary wares, ventil-
lation system including tiles and marble fixing to owners requirements and needs.
November 3, 2010 up to April 30, 2011
Handles various projects/maintenance and plumbing works on Ministry of Interior-Maintenance
And Construction Department at Sharjah Prison Jail, Ras Al Khaimah Prison Proposed Cell
Extension, Classrooms for Fujairah Police HQ, Fujairah, New Bathrooms and Toilets at
Sharjah Villa.
A.) November 5, 2010 to December 8, 2010 -SHARJAHPRISON JAIL
Sanitary/Drainage works-Handles the supply and installation of hot and cold water pipes; done external and internal drainage network by removing the old and supply/installed UPVC pipelines, including excavation and backfilling; done connection of drain pipes and all sanitary equipment's and its hardware; supply and fixing western and Arabic toilets; shower mixers; hand wash and water heater.
B.) December 10, 2010 to January 8, 2011-SHARJAH VILLA-NEW BATHROOMS/TOILETS
Managed/handles the constructions of new bathrooms/toilets of Sharjah Police Maj.Arif sister
Madame Marianne Ali's Villa-removal of existing ones to convert to two (2) new rooms which
Includes new drainage systems, design new hot and cold water supply line to owners require-
ments and needs; done partition walls including tiles fixing and grouting works, fixed all
required toilets and bathroom fixtures and fittings such as wash basins, water closets,
bathroom trays and showers including exhausts fans and water heaters.
C, ) January 12, 2011 up to May 30, 2011 -RAK CENTRAL PRISON PROPOSED CELL EXTENSION
AND CLASSROOMS FOR FUJAIRAH POLICE HQ.
Handles and providing needed toilets and water supply system to be used for manpower and
Staff‘s working at both sites including worksites requirements.
Coordinate /handles /supervise the installation of drainage/ sewage piping's; water supply lines on
both ongoing projects.
A.) July 20, 2010 to September 30, 2010
MECHANICAL ENGINEER / SITE ENGINEER
XL TOWER (3B + G + 4 PODS + 20 TYP.Flr.) Office Building
BUSINESS TOWER ( 3B + G + 3POD + HC + 18 TYP. Fir. ) Office Building
Business Bay (Zoning Authority) Dubai, United Arab Emirates
- Handle / manage snags and de snagging works for both towers up to completion for Civil Defense approval.
- Does proper planning and handling of rectification to meet the specified deadline of works.
- Manage daily activities of manpower/co -coordinating with charge hand, foreman’s, supervisors on proper distribution of works and handling of labors.
- Coordinate and communicate to all pre-commissioning inspections, servicing, preventive maintenance services.
- Does quality control of materials, piping works, welding works, plumbing works in working area.
B.) JUNE 23, 2010 TO JULY 19, 2010
MAINTENANCE ENGINEER / SITE ENGINEER
AL MOOSA TOWER-4 POINTS SHERATON (G+M+41 FLR.) HOTEL/APARTMENT BLDG.
TRADE CENTER, Dubai, United Arab Emirates
- Manage/handle MEP snag works such as providing/installation of 2 units motorized dampers on toilet exhaust fan at 19th floor level ( mechanical floor area ) also rectified stairs pressurization fan dampers at 41st floor area wherein damper was weak which does not open on air pressure load.
- Rectified riser copper pipes by providing necessary pipe supports on mechanical shaft area from ground floor to roof top area.
- Handles rectification of various portable water pumps by changing rubber expansion joints with stainless steel flexible joints on 19th, 41st and car parking pump rooms.
- Rectified the gym area air balancing by providing necessary openings
- Handles/manage rectification of chilled water riser in mechanical shafts by providing insulations including 19th floor area (mechanical floor) chilled water pipes to prevent sweating.
C.) JULY 2007 to JUNE 22, 2010
BIN SHAFAR ELECTRO MECHANICAL ENGINEERING CO. LLC.
P. O. No. 111637, Dubai, United Arab Emirates
MECHANICAL ENGINEER / SITE ENGINEER / SAFETY ENGINEER
JULY 2007 to JUNE 22, 2010
MEP IN CHARGE FOR MAINTENANCE/SITE ENGINEER/SAFETY ENGINEER
BONNINGTON TOWER.PLOT J3, JUMEIRAH LAKES TOWERS, DUBAI, UAE
(4B+P+M+39 FLR.) HOTEL/APARTMENTS BLDG.
-Fully responsible in charge for seven (7) months as Maintenance Engineer tie up with Bonnington
Engineering Department, lead a team at site to carry and independently all related schedules, activities,
complains from hotel / apartment guest and occupants, training and guide all personnel in technical
works on right direction as per standardization. Does responsible for maintenance of all facilities from
watersupply, A/C, Mechanical floors area, sewerage and drainage, lights electrical, F/F systems, etc.
.
-Handles direct supervision all activities, maintain and develop production at target schedule and activities
-Performs site supervision on quality works for all installations, erection, fabrication, assembly
and conduct routinely checkup all various equipment's at site protecting at all times.
-Manpower and activities mobilization in daily basis, coordinating to all personnel for all related
-Fully responsible at site for safety before taking any step starting in working area.
-Provide manpower evaluation and records’ showing the methods of work and precautions needed has
been checked by appropriate person.
-Specify to all personnel the precautions to take, ensure precautions, checked safety procedures during
work in progress. Check area and equipment's are safe to work on, complete all necessary certification
sign permit to start the work.
-Conduct seminars and briefings, tool box meeting on employee and manpower, and also serve as first
aider and medic.
-Does maintaining the quality and quantity of works, ensure the satisfaction of clients, main contractor,
Sub-contractor and maintain the standard integrity of company at all times.
-Familiarized in the following system such as internal and external drainage woks includes; site piping
installation, soil, water, rain water, balcony drains, domestic water sterilization and grease separator
system. Familiarized on hot and cold system, PPR, pex pipes, UPVC & UPVC pipes, sanitary ware and
accessories installation.
-Familiarized on the installation, maintenance, commissioning of equipment's and accessories,
Components such as AHU, FAHU, FCU.
-Does/familiarized, works on cable pulling.
Direct supervision for the Erection of the 380 KL. ADO TANK
For PREMIUM PACKAGING INTERNATIOINAL INC.
SAN MIGUEL CORPORATION
• Supervision necessary for the fabrication and installation of the
Proposed Receiving and Service line for the 380KL.Storage Tank
MODULE TECHNICAL SAFETY (Punta Baluarte Resort, Calatagan, Batangas)
August 6 -
PROJECT MANAGER/ SAFETY ENGINEER/PROJECT ENGINEER
Length of Service: July 1994-December 2005
Company Name: KESCK INDUSTRIAL AND MARINE SERVICES / KESCK ENGINEERING
AND CONSTRUCTION
Company Address : Escanilla St. Concepción, Malabon City, Metro Manila
SUB-CON TO KEPPEL BATANGAS SHIPYARD
KEPPEL PHILIPPINES
Bo. San Miguel, Bauan, Batangas
Job Description
• Submit quotation/offer for a particular contractor project
• Attend seminars/biddings/meetings representing a certain contractor as per request
• Prepare daily/weekly time report and salary computation
• Record daily activities and accomplishment\
• Direct supervision on every project; monitor fabrication, ship repair; ship fabrication of LOCAL AND INTERNATIONALVESSELS Dock at KEPPEL BATANGAS SHIPYARD (Barges; Tankers; Passenger Vessels, Cargo Ships, Navy Ships and other.)
• Balance manpower; prepare work schedule
• Conduct weekly safety meetings/briefings
• Prepare accomplishment Billings
• Manage cash flow and prepare payroll
Position: PROJECT ENGINEER / SAFETY ENGINEER
Length of Service: February 20- June 30, 1994
Company Name: C.E.M. INDUSTRIAL SALES AND TECHNOLOGISTS
Company Address 2585 Beata St., Pandacan, Metro Manila
Job Description
• Supervise/monitor fabrication works at PSPC Pandacan Installation
• Balance manpower/field coordinator on various projects; order Materials required
• Prepare work schedules/estimates; attend biddings
• Work on the repair of various leaks at LUB OIL BATCHING GANTRY STEAM LINE
• Identify live pipelines at LOPP and provision of markings
• Supervise on the repair of Fire Pump No.5 base plate; modification of collapsible ladder hand rail
• Work on Modification of BJ Noi.2 base plate at LPG Plant
• Direct supervision on the installation of LUB OIL SERAC FILLING MACHINE including pipelines; valves base supports, post supports and other assembly.
CUSTOMER -PILIPINAS SHELL PETROLEUM CORPORATION
PANDACAN INSTALLATION, PANDACAN, MANILA
Position: SAFETY ENGINEER / POJECT ENGINEER
Length of Service: January 3-February 15, 1994
Company Name: M.E. TECHNOLOGISTS
Company Address: 6 Impel St. Marietta Romeo Villa Sta. Lucia, Pasig City, Metro Manila
• Supervise fabrication works/balance manpower/estimates
• Prepare work schedule
• Supervise the Tapping of Various pipelines of Bunker Fuel Tank at PSPC BULI DEPOT CUSTOMER -PILIPINAS SHELL PETROLEUM CORPORATION BULI DEPOT
• Supervise the installation of Two (2) units METER HINGE RAMP For Bulk Filling Gantry
CUSTOMER - PILIPINAS SHELL PETROLEUM CORPORATION
PSPC APARRI DEPOT, APARRI, CAGAYAN
Supervise the fabrication, installation, erection of pipe/electrical Bridge between Main Power Plant to
Tank Area.
CUSTOMER - PILIPINAS SHELL PETROLEUM CORPORATION
PANDACAN INSTALLATION, PANDACAN, MANILA
CUSTOMER - PREMIUM PACKAGING INTERNATIONAL INC.,
SAN MIGUEL CORPORATION (SMC)
(Halayhay, Tanza Cavite )
May 10 - July 23, 1991 -FIELD ENGINEER / SAFETY ENGINEER
• Direct supervision for the Erection of the 380 KL. ADO TANK
For PREMIUM PACKAGING INTERNATIOINAL INC.
SAN MIGUEL CORPORATION
• Supervision necessary for the fabrication and installation of the
Proposed Receiving and Service line for the 380KL.Storage Tank
MODULE TECHNICAL SAFETY (Punta Baluarte Resort, Calatagan, Batangas)
August 6 - 9, 1991 -TECHNICAL SAFETY SEMINARS
• Participated/completed MARKETING SAFETY TRAINING
CUSTOMER - PILIPINAS SHELL PETROLEUM CORPORATION
JOCASP NAIA DEPOT, Ninoy Aquino International
Airport, Pasay City
September 26 -December 15, 1991 -PROJECT / SAFETY ENGINEER
• Direct supervision for the Erection and Installation of Fire Pump Shed
And Fire Pump/Piping for JOCASP NAIA
CUSTOMER - NATIONAL POWER CORPORATION
Hopewell Gas Turbine Power Plant, Navotas, Metro Manila
January 8- February 4, 1992
• Work on the Fabrication Drawing and Plan for the
Proposed 70 Ft. dia. DIESEL FUEL OIL
STORAGE TANK for HOPEWELL GAS TURBINE POWER PLANT
CUSTOMER - NATIONAL POWER CORPORATION
(San Pascual, Batangas)
February 5- March 23, 1992 -SAFETY / PROJECT ENGINEER
• Direct supervision for the repair and rehabilitation of 62 M.dia.FLOATING ROOF BUNKER FUEL OIL STORAGE TANK
CUSTOMER - PILIPINAS SHELL PETROLEUM CORPORATION
PSPC PANDACAN INSTALLATION (Pandacan, Manila)
April 5, 1992- May 30, 1993 - PROJECT / SAFETY ENGINEER
• Direct supervision for the Re-bottoming and Internal Cleaning of Tank
No.13 W 919
• Fabrication/ Installations of Roof Extension for LUB OIL WARE-
September 20, 1992 and January 19, 1993 - Awarded Plaque of Recognition on Invaluable contribution to 3.0 Million Man-hours and 4.0 Million
Man-Hours worked without Lost Time Incident
MARKETING METRO MANILA, Pandacan, Manila
• Participated in and successfully completed
ENTRY INTO CONFINED SPACES SEMINARS
PILIPINAS SHELL PETROLEUM CORPORATION
CUSTOMER - NATIONAL POWER CORPORATION
Hopewell Gas Turbine Power Plant, Navotas, Metro Manila
January 8- February 4, 1992
• Work on the Fabrication Drawing and Plan for the
Proposed 70 Ft. dia. DIESEL FUEL OIL
STORAGE TANK for HOPEWELL GAS TURBINE POWER PLANT
CUSTOMER - NATIONAL POWER CORPORATION
(San Pascual, Batangas)
February 5- March 23, 1992 -SAFETY / PROJECT ENGINEER
• Direct supervision for the repair and rehabilitation of 62 M .dia .FLOATING ROOF BUNKER FUEL OIL STORAGE TANK
OCTOBER 1989 TO DECEMBER 31, 1993
F.E.D. CONSTRUCTION CO., INC. (119 Flamengco St. Panghulo, Obando, Bulacan)
PROJECT ENGINEER/ SAFETY ENGINEER/ ENGINEERING IN CHARGE
• Balance Manpower
• Prepare Work Schedule
• Estimates
• Supervise shop Fabrication
• Order materials required for the projects
• Attend Bidding
CUSTOMER - SAN MIGUEL CORPORATION, POLO BREWERY (SMC)
(Polo, Valenzuela City, Metro Manila)
October 20 to November 1989 - ESTIMATOR / SAFETY / PROJECT ENGINEER
• Direct supervision on the Rehabilitation of Pipe Bridge between Main Power Plant to CO2PH and CO2 water tank (painting, cladding and insulation of various pipelines/dismantling of acid tanks).
CUSTOMER - PILIPINAS SHELL PETROLEUM CORPORATION
(Baliwasan Seaside, ZamboangaCity)
January 12 to August 24, 1990 - FIELD ENGINEER - PILIPINAS SHELL
PETROLEUM CORPORATION (PSPC)
• Direct supervision for the installation of deep well for Zamboanga
PSPC fire water supply; tapping of pipelines including electrical Installation.
CUSTOMER - FORTUNE TOBACCO CORPORATION
(Parang Marikina City, Metro Manila)
January 14 - February 17, 1991 - PROJECT / SAFETY ENGINEER
• Direct supervision for Tank Cleaning; repair of leaks and re-bottoming
Of Bunker Fuel Storage Tank No.8 (15 ft. dia. X 18 ft. ht.
Graduated Bachelor Degree in Mechanical Engineering