miguel rivera jr

DMCI CONSTRUCTION AND ENGINEERING
TPLEX PROJECT PHILIPPINES
CIVIL CONSTRUCTION Jan 23 2012 to present
Crane operator TADANO 250RT / SANY 1100

Duties and responsibilities
Load unload of rebar sreel fixer stir up assist on sheet piling operation, tandem operation for loading of girder (HEAVY LIFT)

JE MANALOGENERAL CONTRACTOR
CIRCULO VERDE PASIG MM PHILIPPINES
CIVIL CONSTRUCTION Dec 19 2011 to May 18 2012
Pile driving / sheet piling operator KOBELCO 80T

Duties and responsibilities
Move hand and foot levers of hoisting equipment to position piling leads, hoist piling into leads and position hammer over pilings. Conduct pre-operational checks on equipment to ensure proper functioning. Drive piling to provide support for buildings or other structures, using heavy equipment with a pile driver head. Move levers and turn valves to activate power hammers or to raise and lower drop hammers that drive piles to required depths. Clean lubricate and refill equipment

QATAR ENGINEERING AND CONSTRUCTION CORP
QATAR GAS QG 3 and 4 al khor Qatar
June 14, 2011 to Nov 18 2011
OIL AND GAS
RIGGING SUPERVISOR

Duties and responsibilities
Received instructions from and report to the respective supervisor. Secure and organizes appropriate materials and plants, Direct and supervises the activity of the rigging personnel. Performs quality assurance / control to a standards established by the company. Receives orders and discusses about the extent of the work and other duties. Check daily on progress of work and inspects completed work to ensure conformity to company standards and sound rigging practices Responsible for the full compliance with permit to work and safety regulations as applicable generally ensuring


Contract work in safe and competent manner. Ensures all lifting tackles are maintained in sound conditions and that store stock levels are kept at an adequate level. Also ensure that central rigging stores equipment "out and in" system is properly monitors and regularly checked

ROYAL CARGO CONSOLIDATED LOGISTIC INC
PHILIPPINES, Jan 20 2011 to June 9 2011
LOGISTIC
Crane operator liebherr 45 tonner

Duties and responsibilities
assemble of new SANY crawler crane 150 tonner and LIEBHERR 300 tonner to be used for the assemble of new portal crane for ASIAN TERMINAL INCORPORATED (ATI), load, unload and transfer of material such as vessel, steel plate, container. Also to be used for project in wind mill in la onion pangasinan .rigging plan and execution

AUTOMATIC MACHINE FACTORY Jeddah Saudi Arabia
MARCH 16 2009 TO JUNE 17 2010
OIL AND GAS
LTM 1100 -5.2 (100T) and LTM 1090- 4.1 (90T) trucks mounted crane Rigging supervisor

Duties and responsibilities
Work on rigging plan and execution
Splicing of cable both non rotating wire and left Lang lay cable, positioning of crane on ground and on cabin, understand the use of LCC ( LIEBHERR COMPUTED CONTROL), load and unload of materials. Make a rigging drawing plan for the team
Work preparation for the lifting and execution, Lift and install of mill and vessel,
Load and unload of plate and channel

HANJIN HEAVY EQUIPMENT INDUSTRY
SUBIC ZAMBALES, PHILIPPINES
SEPT 3 2008 - FEB 10 2009
SHIPYARD BUILBING
IHI CCHI 1000 (100T) crawler crane GROVE GMK 165-2 (165T) truck mounted crane Crane operator;

Duties and responsibilities
Responsible in crane maintenance work preparation and planning, loading and unloading of steel plate and erection of ship parts, the use of man basket is essential in high places for work job, watch the wind speed, take precaution on heavy lift and taking the load away from the crane.
Calculating load, splicing of cable, use of international hand signal, certified crane operator, know how to use the load charts, crane capacity, lifting tools capacity, angle effects, choke effects, and good technique in rigging, check pre lift before finally lift the total load on air. Prior before lift swing 360 degrees to make sure no obstacle on crane radius, check the ground position for the stabilizer
PRODUCTION SERVICES NETWORK / EXXON MOBIL CHAD AFRICA

OIL AND GAS
GROVE RT 530 (30T) to RT875C (75T) mobile crane
0ct 19 2003 to Aug 11, 2008
Wellwork crane general foreman

Duties and responsibilities
Dispatch all crane operator and rigger on all location to where they will work, if lacking of manpower assist as trailer driver, crane operator, forklift and man lift operator, coordinate with the supervisor for any additional job to be taken, liaise with other company such as WOODGROUP, SCHULUMBERGER, FMC WELL HEAD, PRIDE DRILLING and ESSO, have permit accept and close before and after the job finish, work with SCHULUMBERGER such as diesel stimulation, well testing, set posit, slick line, wire line, brine bull head, sump packer, etc. work with WOODGROUP on removing and installing of drive head, bearing box and space rod out, FMC WELL HEAD to assist on installing and removing swab valve and tree cap, to assist with PRIDE DRILLING on erection and dismantling of rig platform, to deliver nitrogen from different location using the nitrogen truck, installing and removing of flow line and working on well testing
Well work services for work over jobs
Remove flow line, choke and wing valve. You will need to N/U (nipple up) a blind flange to the side of the "flow tee" to isolate the tree. When the rig has completed the work and moved off of location, well work crew will N/U the choke, flow line and wing valve. ( the wing valve may already be attached if the tree was sent in to FMC)
Required tools - compatible blind flange, extra studs and nuts, hammer wrenches, ring gasket (s)
For sump packers
Well work crew will N/D (nipple down) the dry hole tree, wire line will set the sump packer, well work crew will N/U the dry hole tree
Required tools- hammer, wrenches
For slick line and E-line work
Remove tree cap, N/U swab valve, when work is completed, N/D swab valve and re-install tree cap
Required tools- swab valve, ring gaskets, hammer wrenches, extra stud and nuts
For stim jobs
Remove tree cap, N/U stim block (at FMC), when job is completed, N/D stim bock, install tree cap. Always have a work permit and JSA, your JSA should be updated for every job as conditions always change. Always make sure the well is DE-ENERGIZED! Always make sure that the master valve is in the closed position before breaking nuts loose.

INDUSTRIAL MAINTENANCE INTERNATIONAL/ KELLOG BROWN AND ROOT
OIL AND GAS
AUG 30 2002 to OCT 19 2003
RT 530 to 875C (75T) Mobile crane: MANITOWOC 999 (200T) crawler crane Crane operator

Duties and responsibilities
Dispatch all crane operator and rigger on all location to where they will work
Assist as trailer truck driver, crane operator, forklift operator and man lift operator if


Lack of manpower, Coordinate with supervisor for any additional job to be taken
Liaise with other company such as WOODGROUP, SCHULUMBERGER, FMC, PRIDE and ESSO Have permit accept and close before and after the job is finish
Work with schulumberger with their different types of jobs such as logging, diesel stimulation, slick line, brine bull head, well testing, set posit, etc.
Loading and offloading of vessel (120MT)
Installing and assisting of equipment for fitter, welder and fabricator.

MARUBENI ENGINEERING NIGERIA
ENERGY
Mar 7, 2001 to May 31, 2001
Boiler rigger supervisor

Duties and responsibilities
Under designation as boiler rigger supervisor, planning scheduling and overseeing. To utilize, inspect prepare all tools and work plan, working with a group of rigger, welder, fitter and turbine specialist Work on rigging plan Utilize worker on beveling, grinding, welding and rigging Work on dis-assembly and assembly of Boiler Feed Pump (BFP)
Work on assembly and dis-assembly of Automatic Recirculation Control Valve (ARCV)
BFP work preparation Release oil from hydraulic coupling tank Remove accessories pipe Disassemble coupling bearing, casing covers and pulls out inner check centering
Calibrate valve and instrumentation Non-conformance processing work according to result Adjustment of local test. ARCV work preparation. Check of condition (inspection of appearance) Movement of the handle Gland condition Rigging of water wall, back stay and trusses to disassemble and after to assemble Knowledge on rigging, pipe fitter, welder and millwright Rigging and installing of turbine
(ASRY) ARAB SHIP REPAIR YARD
BAHRAIN
SHIPYARD REPAIR

Jun 3, 2000 to Sept 29 2000
SAILOR RIGGER

Duties and Responsibilities
To load and offload materials from inside the bulk of ship or any part of the ship that need to be brought to shop for repair
To check all chain blocks and hooks are within the capacity of the tools or equipment to load and position
Secure the ship when berthing on the dry duct or floating duct
Understand where the different area of the ship
Must be an expert rigger in maneuvering of equipment from skylight down to location without bringing it down until it reach to its location

DAEWOO HEAVY INDUSTRIES INCORPORATED
PORT HARCOURT, WEST AFRICA NIGERIA
OIL AND GAS
Jan 12, 1997 to Apr 19, 1998
Rigger foreman


Duties and Responsibilities
To transfer pipe from one place to another using overhead crane
The skills and knowledge on hitches and different types of knot tying is recommended to use in this kind of job to load and offload pipe from shop to pipe rack
Offloading and installing of vessel (120mt) Expert on international hand signaling Expert on different types of hitches and knot tying Must know how to calculate load and the sling and shackles to be used Have the center of gravity be known before lifting
To operate crane when out of manpower

ENGINEERING EQUIPMENT INCORPORATED
MANILA PHILIPPINES
CIVIL CONSTRUCTION
Nov 18, 1996 to Apr 12, 1997
POTAIN GMK 5165-2 (16T)
Rigger / tower crane operator

Duties and responsibilities
Under designated supervision as rigger/ tower crane operator must have the knowledge on general rigging, wire rope information and crane positioning, assembly and dis-assembly Knowledge and skills on rigging and signaling Knowledge on composition of a wire rope its grade, lays and core Selecting the proper wire rope for the right job
Knowledge on uncoiling and unreeling wire rope Knowledge on splicing, hitches of wire
Knowledge on revving Knowledge on shackle and wire capacity to be used
Knowledge on different types of knot tying and hitches Skills and knowledge on signaling and its effect Use tag line in controlling of load No cutting action on running lines, use buffer Hooks are turned out when hooking on container and material
Secure all unused sling when not in use Check on sling angle, the choke effect and its center of gravity to load and offload material from truck to shop to erect all material from shop to the building to signal the tower crane operator to lift the load using radio only

ELECTRUCK PACIFIC INC. SUBIC BAY FREEPORT ZONE
Olongapo Subic Bay Free port Zone
Rigger/ Overhead Crane Operator
MANUFACTURING
DEMAG OVERHEAD
Apr 7, 1994 to Sept 19, 1996
Duties and responsibilities
Must be well known on all aspect of rigging system
Must know how to balance in perpendicular all equipment
Must know how to manipulate heavy equipment inside a narrow space
To load and offload all tools and equipment from causeway to shop
To turn upside down a 40T column of container carrier
To erect all parts of straddle crane and container carrier or portal crane
The use of international hand signal must be use at all times during operation
Check and inspect the sling to be used if there is a crack, bend, kink or rust on the sling, never to use it, discarded it if necessary
Use the right shackles and sling for heavy lifting
Have the portal railway clear of any obstacle as operations on going


Skills and Duties as Overhead Crane Operator
Inspect the crane daily or periodically and perform daily or periodic maintenance as prescribed by the manufacturer for cranes in daily regular or other periodic service
Operate the crane only if trained and qualified
Perform prelift crane check and confirm that crane controls, operating aids and safety devices are operational
Operate the crane in a safe, controlled and smooth manner
Maintain the daily crane operation log
Have a thorough understanding of the information in the crane's operating manual and understand the crane limitations
Determine the load and rigging weight and verify that they are within the capacity of the crane
Check that all hazards are identified
If applicable, review the lift plan, signalman needs, rigging and the need for radio communication with the site supervision during the prelift meeting
Rig the load and carry out the lift in accordance with manufacturer's recommended operating procedures and lift plan
Inform site supervision of any dangerous condition observed before or during crane operations

Personal background


Zip code
2200
Passport #
EB1271593
Seaman book B0616645
Driver license C09-03-000755
SSS #
02-0764161-5
Tin #
177113006000
Phil health
190253905496


Weight 110 lbs.
Height 5'5"
Built medium