معاوية ابوعبيد

*Advise executive management on relevant regulatory standards, trends, and contractual requirements related to safety, health, and environmental protection, and aligning safety initiatives with overall business objectives is essential for demonstrating a strategic contribution.
*Ensure that all relevant occupational safety regulations are followed to minimize workplace accidents. This involves staying up-to-date with legislation and conducting thorough assessments to confirm compliance. Additionally, follow up on audits and inspections to ensure that both regulatory requirements and company policies are being met.
*Anticipate, identify, predict, and evaluate potentially hazardous conditions and work practices, in respect of current and future operations through available information sources e.g. performance records, historical data, research, work experience / completed projects, etc.
*Review / evaluate, in conjunction with concerned specialists / competent persons or technical staff or other outside related organizations (if required), existing or potential safety, health, and environmental problems and issues that may concern or have the potential impact on the company's operations or employees' welfare.
*Formulate and prescribe engineering / administrative hazard controls through the development of job-specific safety procedures, programs, manuals, policies, and guidelines and integrate them into the work system or practice, to prevent, nullify, or reduce the probability of, if not eliminate all identified and reasonably foreseeable hazardous conditions and practices.
*Direct and administer the implementation of hazard controls and programs within the organization. in conjunction with the management at all levels including planning design, purchasing, and line supervision, to effectively cause and maintain the desired compliance.
*Evaluate measure and audit the effectiveness of the hazard control programs and preventive measures in place, through universally accepted techniques, principles, and guidelines. Provide the executive management, responsible entities, and individuals with the results of the effectiveness assessment, for their respective management and appropriate actions. Manage incident investigations, root cause analysis, and the implementation of corrective actions.
*Maintain accurate records of HSE performance, incidents, and compliance activities. Evaluate and interpret safety statistical data related to occupational injuries/illnesses, accidents/incidents, evaluate their trends and identify causes, and formulate and implement appropriate permanent preventive and control measures through management at all levels and line supervision.
*Advice on setting up the improvement guidelines for the Project HSE Management System for project employees. Ensure improvements are implemented and results are feedback to employees.
*Support the tendering team, by reviewing and approving safety-related technical submittal requirements e.g. safety execution plans, statistics, programs, and similar job-specific pertinent information, in conformance to clients' standards or work requirements.
*Managing HSE budgets, and optimizing resource allocation to maximize efficiency

Key Achievements
1- Achieved and maintained 100% compliance with local, national, and international health and safety regulations, resulting in zero fines or penalties
2- Led initiatives that reduced environmental impact, such as waste reduction programs and energy efficiency projects, contributing to corporate sustainability goals.
3- Reduced risk and control hazards by 42%, by performing site audits to ensure compliance with HSE standards.
4- Successfully developed and lead the team that achieved both the ISO 45001 and IS0 14001 accreditations for the company

**7 Projects Overview**
*Employees: 5, 000+ (including 7 HSE Managers, 15 Senior HSE Advisors, 75 HSE Advisors, 3 Document Controllers, and 1 HSE Trainers)*

1. Advise executive management on relevant regulatory standards, trends, and contractual requirements related to safety, health, and environmental protection that may affect business operations and activities.

2. Anticipate, identify, predict, and evaluate potentially hazardous conditions and work practices regarding current and future operations through available information sources, such as performance records, historical data, research, and prior project experiences.

3. Review and evaluate, in collaboration with concerned specialists or technical staff, existing or potential safety, health, and environmental issues that may impact operations.

4. Formulate and implement engineering and administrative hazard controls by developing job-specific safety procedures, programs, manuals, policies, and guidelines, integrating them into the work system to prevent, mitigate, or eliminate identified and foreseeable hazardous conditions and practices.

5. Direct and administer the implementation of hazard controls and programs within the organization, in collaboration with management at all levels, including planning, design, purchasing, and line supervision, to ensure effective compliance.

6. Evaluate, measure, and audit the effectiveness of hazard control programs and preventive measures using universally accepted techniques and guidelines. Provide executive management and responsible entities with results of these assessments.

7. Analyze safety statistical data related to occupational injuries, illnesses, accidents, and incidents, identify trends and causes, and develop and implement appropriate permanent preventive and control measures in conjunction with management at all levels and line supervisors.

8. Support the tendering team by reviewing and approving safety-related technical submittals, such as safety execution plans, statistics, and job-specific information, ensuring compliance with client standards and requirements.

9. Participate in job prerequisite site surveys and hazard identification tours with clients to develop job-specific safety programs or work procedures for new projects.

10. Develop and issue client approved job specific overall safety plans and programs for new projects, ensuring compliance among the project workforce through site management and line supervision.

11. Create customized safety training programs and materials tailored to job requirements and current practices (e.g., rigging safety, scaffolding safety, hazard recognition and communication, lockout/tagout, fire safety, confined spaces) to enhance the safety awareness of site employees.

12. Attend technical clarification meetings, kickoff meetings, and pre-qualification meetings with clients, representing the company in all safety-related matters as needed.

13. Qualify and appoint safety personnel for new projects, including subcontractor safety representatives.

14. Oversee the overall implementation of the corporate and client-approved project-specific safety and loss prevention program and related policies and procedures across all projects.

15. Maintain the highest level of safety throughout all stages of work to prevent incidents or accidents.

16. Ensure compliance with all statutory requirements related to project implementation.

- Construction of Al-Hikma drug warehouses in Tabuk, supervising their operation and training of staff, 2 year’s
- Establishment, operation and maintenance of a military base in Al - Ahsa) Shadqam) 2 year’s
1. Ensure Health & Safety, Environmental and Security of men, equipment, materials and methods during all phases of work.
2. Prepare Health & Safety, Environmental and Security instructions/ precautions for several of operations and for handling various equipment's
3. Coordinate with site manager, Construction manager, site engineers, and other workers to ensure that HSE instruction are well understood & followed strictly.
4. Finalization and follow-up of all functions required by Civil Defense / Responsible authorities and related to work on risk management.
5. Conduct investigation of accidents to determine actual cause, and recommend preventive & corrective action to avoid recurrence.
6. Follow up for corrective & preventive actions recommended.
7. Assist in safety training of workers.
8. Maintain proper documentation systems for all accident reports/ investigation reports.
9. Carry out surprise checks on site to determine effectiveness & adequacy of system for safety. Highlight wrong practices being followed which are not Meeting safety requirements & recommend corrective action. Keep records of the same.
10. Coordinating with other departments to develop, implement and monitor HSE programs
11. Implement the Site Safety Management Plan (SMP) for the locations to ensure a safe work environment for all company employees, contractors, visitors and community.) By preparing a safety plan and submitting it to the competent authorities for approval. (
12. Following-up all safety systems installation & Maintenance job orders, including (Firefighting, and Fire Alarm).
13. Perform frequent HSE compliance inspections for Client locations, and maintain reports of significant risks and recommendations & prepare risk Assessment.
14. Conduct frequent safety training (TBM, TBT, Fire safety, evacuation plan etc.) to the company employees in locations.
15. Design, implement, monitor, and update the environmental management plan and environmental monitoring program (water quality, noise, air quality, waste water, sludge, traffic and transportation, hazardous material, hazardous waste, domestic solid waste, and soil)
16. Processing all guidance and safety markers in accordance with global standards
17. Lead all safety engineer & officers in maintaining all HSE aspects on sit during Establishment, operation and maintenance of the project.
18. Supervising the safety technicians, activities.

- North Railway Project CTW400) implementation of the Qassim / Riyadh railway with a length of 456 km in all its facilities of bridges, passages and storage yards for trains (1 year
-Constructing Ha'ir Hawtah Bani Tamim Highway road, with a length of 108 km and consists of two directions (8 lanes), and 8 bridges. 1 year
1. Inspect machinery, equipment, and also working conditions in the site or other setting to make sure compliance with occupational safety health regulations
2. Securing the work of mobile cranes and making the necessary calculations and establishing the necessary requirements
3. Ensure safety procedures for the following works (deep excavations, work in cramped places, work in confined areas, work on the rise, working on Scaffolding, etc.)
4. Inspection of fire prevention equipment and distribution to the project according to NFBA10 Standard, several first aid kits were distributed to some drivers.
5. Training of staff on (firefighting, first aid, safe handling in emergencies)
6. Participates in incident investigations, including near-misses, property damage & injuries.
7. Participates in weekly contractors’ health, safety & environment (HSE) meeting & communicating/driving management to correct or recognize discussed issues.
8. Conduct weekly meeting with all Sr. & HSE field officers & to discuss HSE issues & rise to management for adequate action.
9. Prepare weekly & monthly & yearly health, safety & environment (HSE) statistics report.
10. Test work areas ( noise, light, humidity, temperature, static electricity, toxic gases as well as other hazards) using devices intended for this purpose in the different work site and developing the necessary corrective actions

-Establishment of a high school Project (Irbid- Jordan)
1. Follow-up safety work during construction
2. Design, implement, monitor, and update Risk analysis