Senior Electrical Engineer
Arabian Bemco Contracting Company
Total years of experience :14 years, 11 Months
During my tenure as an Electrical Engineer at Arabian BEMCO Contracting Company, I made significant contributions to an infrastructure project aimed at enhancing the first ring road in Mecca city. This project covered a 5‐kilometer stretch and involved the construction of 6 bridges, 1 tunnel, 1 electrical substation, and a backup generator building housing 6 generators, collectively generating approximately 15 MW of power.
This project held immense significance as one of the most critical endeavors in Mecca, with its primary objective being to improve traffic regulation in the central region.
Job description:
• Fulfill the senior electrical engineerjob.
• Coordinating with the Project Manager on work and material‐related issues.
• Verify received materials for compliance and obtain consultant approval.
• Studying job specifications and contract requirements thoroughly.
• Leading the engineering team to ensure optimal work progress.
• Overseeing the completion of punch lists by the engineering team.
• Supervising the testing team to conduct necessary testing and commissioning for cables and equipment installed by our team.
• Ensure project stays within budget while maintaining high quality.
King Abdulaziz International Airport holds immense significance as the primary gateway for Hajj and Umrah pilgrims journeying to the Holy Mosque in Makkah. A standout feature is the worlds fourth‐largest terminal, the Hajj terminal, covering an expansive 510, 000 square meters.
Our company plays a pivotal role in supporting SBG and Smart Vision to ensure the successful completion of this monumental project. Our contributions span various critical areas, including electrical rooms, MVSG rooms, MDB rooms, UPS rooms, battery rooms and HVAC rooms all of which are essential to the projects overall success.
Job description:
• Fulfill the construction managerjob.
• Coordination with the Project manager regarding work and material issues.
• Attend the weekly meetings with the main contractor, to discuss work‐related issues.
• Check the conformity of received materials.
• Study job specs and contract requirements.
I had the privilege of serving as the Project Construction Manager for GIJCC5 in Jizan.
This project involved the oversight of all MEP (Mechanical, Electrical, and Plumbing) building work as part of the construction of a new refinery plant for Saudi Aramco, a significant venture in their refining projects. The project was executed under TR (Tecnicas Reunidas) as the main contractor.
Within BEMCOs scope, we were responsible forthe management of 12 critical buildings, including:
• 4 Electrical Substations
• 3 PIOBs (Process and Interface Buildings)
• 1 Control Building
• 1OMEM (Operation Maintenance and Engineering Building)
• 1 WaterTreatment Building
• 1 Maintenance Shelter
• 1 Catalyst Store
These buildings played a pivotal role in the projects overall success.
Job description:
• Fulfill the construction managerjob.
• Coordination with the Project manager regarding work and material issues.
• Attend the weekly meetings with the main contractor, to discuss work‐related issues.
• Verify received materials for compliance and obtain consultant approval.
• Study job specs and contract requirements.
• Prepare the planning of work and make allocation of resources.
• Interpret the drawings tagged for construction.
• Lead the Engineers and all team for best work progress.
• Discuss with QC/PID engineers to maintain the works performed as per contractual requirements and up to standards.
• Lead the Engineers and all team forthe punch list closing.
• Make the required testing and commissioning for cables and equipment installed by us.
• Ensure project stays within budget while maintaining high quality.
I served as a Project Manager for the HVAC system in RPP12, a significant power plant project located in Riyadh, Saudi Arabia. This project is a noteworthy addition to the regions powergeneration infrastructure.
The new grass‐root power plant operates as a Combined Cycle Power Plant with a net capacity of 1, 740 MW after accounting for all plant auxiliary consumption under ambient conditions. The plant is situated approximately 100 km west of Riyadh City, KSA.
The configuration of each combined cycle block includes 4 Gas Turbine Generators (GTGs), 4 Heat Recovery Steam Generators (HRSGs), 1 Steam Turbine Generator (STG), and 1 Air‐Cooled Condenser (ACC). In total, there are 2 blocks, and the primary fuel source is sales gas, supplemented by Distillate and Arabian Super Light as secondary fuels.
Job description:
• Coordination with the Project Director regarding work and material issues.
• Attend the weekly meetings with the joint venture company, to discuss work‐related issues.
• Study job specs and contract requirements.
• Prepare the planning of work and make allocation of resources.
• Interpret electrical drawings tagged for construction.
• Prepare work daily tasks and make daily report.
• Lead the erection team for best work progress.
• Check the conformity of received materials.
• Make Request of the Inspection. Collaborate with the consultant
• Discuss with QC engineers to maintain the works performed as per contractual requirements and up to standards.
• Follow the work and check if its done as per approved drawings.
• Lead the team to close the punch list.
• Ensure project stays within budget while maintaining high quality.
I have the privilege of serving as the Site Electrical Engineer responsible for Zone 1 in the National Guard housing project in Qassim (SANG). This expansive project encompasses a total of 1, 150 Soldier villas and 100 Officer villas. Within this scope, my role involves the supervision of electrical work for 252 Soldier villas and all 100 Officer villas, contributing to the successful completion of the entire project.
Job description:
• Study job specs and contract requirements.
• Interpret electrical drawings tagged for construction.
• Prepare the planning of work and make allocation of resources.
• Prepare work daily tasks and make daily report.
• Lead the erection team for best work progress.
• Check the conformity of received materials.
• Make Request of the Inspection. Collaborate with the consultant
• Discuss with QC engineers to maintain the works performed as per contractual requirements and up to standards.
• Follow the work and check if its done as per approved drawings.
• Prepare as built drawings.
• Ensure project stays within budget while maintaining high quality.
At Electric House (Power Centre factory), my journey began as a Services Engineer before I transitioned to the Design and Estimation Engineer department. In these roles, I was involved in various key tasks:
Job description:
1. In Services Department:
I was a part of the Al‐Shamya project, an extension project for the Holy Mosque (almassjid alharam). My responsibilities included electrical panel installation and cable termination for all MDB panels in the Piazza area. These MDBs served essential systems within the Holy Mosque, including lighting, CCTV, and sound systems.
2. In Design Estimation Department:
I was responsible for designing and price estimating LV panels for power and control, ensuring they adhered to Schneider Electric standards. This process required a meticulous review of customer specifications and subsequent design for estimation.
Additionally, I conducted Short Circuit and Discrimination studies for various projects, utilizing Schneider Electric software.
I played a pivotal role in the development of a District Cooling Plant for King Abdul Aziz University in Jeddah. This state‐of‐the‐art plant leverages ice‐cooling technology to
deliver an impressive cooling capacity of 22, 000 tons.
My responsibilities encompassed both internal and external aspects of this project, ensuring its successful completion.
Job description:
• Study job specs and contract requirements.
• Interpret electrical drawings tagged for construction.
• Prepare the planning of work and make allocation of resources.
• Prepare work daily tasks and make daily report.
• Lead the erection team for best work progress.
• Check the conformity of received materials.
• Make Request of the Inspection. Collaborate with the consultant
• Discuss with QC engineers to maintain the works performed as per contractual requirements and up to standards.
• Follow the work and check if its done as per approved drawings.
• Prepare as built drawings.
• Lead the team to close the punch list.
• Make the required testing and commissioning for cables and equipment installed by us.
• Ensure project stays within budget while maintaining high quality.
URL removed due to policy violation. Please contact support for further information.