Sr. I&C Commissioning Engineer
General Electric - United Arab Emirates
مجموع سنوات الخبرة :11 years, 4 أشهر
Working with GE Power as an I&C Commissioning Engineer in an Ultra-supercritical (USC) Coal-fired power plant “Hassyan Power plant 4*600 MW“, with responsibilities of commission all the field instruments and troubleshooting from the Engineering DCS.
Working with Siemens S.A.E (through hiring agent) as an I&C commissioning engineer to commission, calibrate and troubleshoot all the field instruments, check out all I/O loops, made all logic and graphics modifications necessary and performed all start-up testing, at a Power Plant with eight modules, 4800MW CCPP.
Some of my Responsibilities:
- Provide support in the site service, configuration, troubleshooting and upgrade of DCS.
- Assure product quality by testing finished products and system capabilities.
- Installation, Calibration and Preventive maintenance of Field Instrument like: Pressure, Flow, Level, Temperature Transmitter, control valve, motorized valve, Positioner, I/P converter, Indicator & controller, all types of mechanical gauges and SOV and all types of switches.
- Site Inspection/ walk-down, project work & manpower planning.
Main Responsibilities:
- Accountable for the safe and timely preparation and execution of the project Instrument commissioning
- work scope, in adherence with project safety targets, procedures and practices.
- Accountable for ensuring all instrument commissioning is carried out in accordance with project commissioning specifications, standards and procedures.
- Accountable for developing the project instrument commissioning strategy and approving instrument procedures - Accountable for ensuring instrument commissioning is carried out in accordance with project schedules and budget. Key aims and objectives
- To play an active role in ensuring that all project HSE goals are achieved and where possible exceeded.
- To process safe completion of designated instrument commissioning activities in line with the project schedule and mile‐stones in a consistent and timely manner.
- To assist in maintenance of the project budget through diligence and utilization of efficient and working practices.
- Supervise the safe completion of the project instrument pre-commissioning/commissioning work-scope
- Supervise and support the project Instrument Commissioning Team.
- Provide Fire & Gas input into project instrument system design during the project design phase.
- Provide instrument commissioning input to the project plans and schedules
Working with Siemens AG through INP Austria GmbH as a field I&C commissioning engineer to commission, calibrate and design all the T3000 instruments, check out all I/O loops, made all logic and graphics modifications necessary and performed all start-up testing, at a Power Plant with eight modules, 4800MW CCPP.
Main Responsibilities:
- Review of P&ID, Preparation of Instrument Index, Technical specifications
- & Datasheets for Process instrumentation and control systems like control valves, pressure relief valves, temperature sensors & transmitter, pressure instruments, level instruments, flow meters, DCS / PLC systems, Fire and Gas detectors, etc.
- Sizing and selections of instruments.
- Design, evaluate, and install sensors and instrumentation systems to meet test requirements.
- Provide design of instrumentation as applied to developmental test engines.
- Loop Checks for the DCS, Cold Commissioning (CFT) and assistance during Hot Commissioning (HFT).
- Site Inspection/ walk-down, project work & manpower planning.
- Technical interaction with the client and the functional team of SIEMENS.
- Operation maintenance, Erection, Commissioning of DCS (T3000)/ Field Instrumentation. Troubleshooting and maintenance of DCS & PLC problem by checking and modification for ladder & FBD programming.
- Able to new input and output assigning in logic and SCADA graphic as required for the process.
- Redundancy checking for the controller to Server/operation station communication and marshaling panel side check.
- Installation, Calibration and Preventive maintenance of Field Instrument like: Pressure, Flow, Level, Temperature Transmitter, control valve, motorized valve, Positioner, I/P converter, Indicator & controller, all types of mechanical gauges and
SOV and all types of switches.
- Experience in handling various calibrator (Low and high pressure, Temperature, Loop Calibrator & HART communicator).
Main Responsibilities:
- Administer, manage and report on the installation safety design process and instrumentation diagrams (P&ID's) which define key system parameters such as set points, control sequences, flows, pressures and temperatures.
- Develop Electrical Schematics, Cause and Effect Diagrams, Factory Acceptance
documents, Wiring Diagrams and Instrument Lists that meets Standards, which includes hazardous/explosive environments
- Intrinsically Safe Systems and Customer Networking Interface to Safety Instrumentation Systems, DCS and MCC.
- Generate bills of material per customer specification and electrical/environmental
code.
- Evaluate customer specifications to ensure appropriate material documents and instrumentation are being supplied.
- Software experience including but not limited to AutoCAD Electrical, Medusa, Microsoft Excel/ Word / PowerPoint.
5-year college program which focuses on the conceptualization, design and development of electronic, computer and communication products, systems, services and processes.
لقد تم حذف الرابط بسبب انتهاكه لسياسة الموقع. يرجى التواصل مع قسم الدعم لمزيد من المعلومات.