محمد السيد

• Review of Project Quality plan and scope of work
• Review Sub contractors WPS & PQR, Inspection test plans and Procedures.
• Witness the welding procedure qualification & welders performacne qualifications as per the code requirements.
• Implementation and supervision of all Sub-Contractor’s Quality Plans, Inspection Plan, Procedures and Work Instructions.
• Maintaining the latest revision of all Contract Documents, Drawings, Specifications, PRs, and Standards, required for Quality Assurance, Quality Control and inspection.
• To control, management and execution of all specified inspection activities as per inspection, specification and codes, witness procedures and tests and interpret results accurately.
• To provide expertise to site team to avoid/resolve quality problems.
• To attend and contribute to site and project technical meetings as necessary
• To provide early warning of potential quality problems
• To conduct in house Tech training with Inspectors to make them aware with revelant code, standard and Bp procedures
• Checks the welders' qualification according to the ASME IX & API 1104.
• To prepare & review the (WPS & PQR) welding procedure & procedure qualification record as per relevant API 1104 & ASME IX
• Ensuring the correct application of the Inspection Test Plan.
• Allocation of Quality Control personnel to the various areas of site activity.
• Issuance of NCR if any non-conformity found.
• Performing root cause analysis of a non conformity.
• Providing the corrective and preventive actions for the non conformity.
• Maintiang the record of all non conformities and log book entries.
• Maintaing calibration of log of all the welding equipments, Gauges and tools.
• Supervision of Welding Inspectors and NDT coordinators.
• Co-ordination with the subordinate welding inspectors on all the welding issues, Engineering technical queiries.
• Solving site relating quality problems.
• Witnessing Welder’s Performance Qualification Test (WPQT)
• Maintaing the Welders Qualification Records, monitoring the welders performance with respect to the define limits of company standards
• Report directly to the Project Site QC Manager regarding the status of QA/QC activities including preparation of compilation of all QA/QA Documents.
• Preparing RFI and Coordinates with client representative and construction production for the QC implementation of the Project Quality Plan which covered the phases of welding of pipes, structural steel
• Assigned to this project for QC Inspection activities in accordance with approved Project Quality Plan & Procedure (QCP) and Inspection Test Procedure (ITP) for Piping, Structural and Welding works to the whole scope of the contract of this project and ensure all welding inspection activities complying to the approved welding procedure (WPS) & engineering standards and international industry codes.
• Ensure all pertinent QC welding inspection records and Documentation is in compiled in boxes file for the preparation to hand over to the client.
• Check the approved WPS & PQR packages prior to start fabrication of pipes spool and miscellaneous pipes support.
• Reviewing the material test reports of project material and electrode consumable to ensure it complies to the approved purchase order and project materials specification.
• Daily weld audit inspection according to the relevant WPS records.
• Inspection of welding consumables materials to ensure it complies to the approved WPS & PQR and maintain the baking records of Low Hydrogen Electrodes.
• Coordinate to the Third Party testing Agency technician for the proper execution of a particular NDT job.
• Repsonsible for implementaion of quality management system with in the department as per the ISO and company requirements.

• Review of Project Quality plan and scope of work
• Review Sub contractors WPS & PQR, Inspection test plans and Procedures.
• Witness the welding procedure qualification & welders performacne qualifications as per the code requirements.
• Implementation and supervision of all Sub-Contractor’s Quality Plans, Inspection Plan, Procedures and Work Instructions.
• Maintaining the latest revision of all Contract Documents, Drawings, Specifications, PRs, and Standards, required for Quality Assurance, Quality Control and inspection.
• To control, management and execution of all specified inspection activities as per inspection, specification and codes, witness procedures and tests and interpret results accurately.
• To provide expertise to site team to avoid/resolve quality problems.
• To attend and contribute to site and project technical meetings as necessary
• To provide early warning of potential quality problems
• To conduct in house Tech training with Inspectors to make them aware with revelant code, standard and Bp procedures
• Checks the welders' qualification according to the ASME IX & API 1104.
• To prepare & review the (WPS & PQR) welding procedure & procedure qualification record as per relevant API 1104 & ASME IX
• Ensuring the correct application of the Inspection Test Plan.
• Allocation of Quality Control personnel to the various areas of site activity.
• Issuance of NCR if any non-conformity found.
• Performing root cause analysis of a non conformity.
• Providing the corrective and preventive actions for the non conformity.
• Maintiang the record of all non conformities and log book entries.
• Maintaing calibration of log of all the welding equipments, Gauges and tools.
• Supervision of Welding Inspectors and NDT coordinators.
• Co-ordination with the subordinate welding inspectors on all the welding issues, Engineering technical queiries.
• Solving site relating quality problems.
• Witnessing Welder’s Performance Qualification Test (WPQT)
• Maintaing the Welders Qualification Records, monitoring the welders performance with respect to the define limits of company standards
• Report directly to the Project Site QC Manager regarding the status of QA/QC activities including preparation of compilation of all QA/QA Documents.
• Preparing RFI and Coordinates with client representative and construction production for the QC implementation of the Project Quality Plan which covered the phases of welding of pipes, structural steel
• Assigned to this project for QC Inspection activities in accordance with approved Project Quality Plan & Procedure (QCP) and Inspection Test Procedure (ITP) for Piping, Structural and Welding works to the whole scope of the contract of this project and ensure all welding inspection activities complying to the approved welding procedure (WPS) & engineering standards and international industry codes.
• Ensure all pertinent QC welding inspection records and Documentation is in compiled in boxes file for the preparation to hand over to the client.
• Check the approved WPS & PQR packages prior to start fabrication of pipes spool and miscellaneous pipes support.
• Reviewing the material test reports of project material and electrode consumable to ensure it complies to the approved purchase order and project materials specification.
• Daily weld audit inspection according to the relevant WPS records.
• Inspection of welding consumables materials to ensure it complies to the approved WPS & PQR and maintain the baking records of Low Hydrogen Electrodes.
• Coordinate to the Third Party testing Agency technician for the proper execution of a particular NDT job.
• Repsonsible for implementaion of quality management system with in the department as per the ISO and company requirements

From 11 September 2011 to UPTO 1 March 2012 CCC (CONSOLIATED CONTRACTORS CO. KAZAKHSTAN) OFFSHORE

From 3 Apr. 2009 to UPTO 10 September 2011 CCC (CONSOLIATED CONTRACTORS CO. KAZAKHSTAN) ONSHORE

Title: Welding and piping Inspector.
Project Name: Kashagan Project Onshore
Client: Agip Co.
Main contractor: Agip Co.
Location: Karabtan, Kazakhstan

DUTIES: 1 ENSURE THAT THE APPROVED WELDING PROCEDURES ARE USED DURING FABRICATION AND PRODUCTION

2 INSPECTION AND CONTROLLING THE STEPS OF ALL HYDRO TESTS

3 INSPECTION AND CONTROLLING THE STEPS OF ALL HEAT TREATMENT PROCESSES APPLIED.

4 INSPECT AND CONTROLLING ALL NDT EQUIPMENT AND ENSURE THAT THEY WORK PROPERLY AND ENSURE THAT THEY ARE CALIBRATED.

5 INSPECT AND CONTROLLING ALL WELDING EQUIPMENT AND ENSURE THAT THEY WORK PROPERLY AND ENSURE THAT THEY ARE CALIBRATED

6 CARRY OUT ALL VISUAL INSPECTION

7 CARRY OUT ALL RADIOGRAPHEC (RT) INTERPRETATION.

8 CARRY OUT ALL MAGNTIC (MT) TESTS.

9 CARRY OUT ALL DEYPENETANT (PT) INSPECTION.

10 ISSUING NDT REQUESTS PERFORMING REPORTS AND HANDLING OVER TO THE CLIENT
.
11 FOLLOW UP ALL THE NDT PROCURE.

12 PREPEARING THE MATERIAL TREACABELIETY.

13 CONTROLLING TH WELDERS PERFORMANCE ON THE SITE.

• Reviewing all the ISO drawings, Arrangement drawings and weld map Isometric drawings
• Supervising and inspecting all the welding activities and mechanical activities
• Preparing Red line As-Built drawings if any site modifications
• Reviewing the WPS according the code of construction and qualification.
• As per WPS ensuring Proper Fit up, preheat before start of welding activity
• Measuring heat input, inter-pass temperature during the welding and ensuring proper cleanliness in between the each pass of a weld layer.
• Visual inspection of finished components and weldments during fabrication
• Preparing the NDT request as per the percentage of NDT required for a particular line.
• Witnessing of all NDE activities during mechanical and welding works
• Monitoring of welding consumables and doing the inspection on theier receiving, storage, controlling and issuance.
• Reviewing the consumable test certificates as per ASME Sec II Part C and maintain the records of inspection.
• Maintaining daily log book for non conformity .
• Coordinating with client on all the quality issues.
• Conducting and witnessing Hydro-static test & pneumatic test inspection of piping spools.

· Ensure that the approved welding procedures are used during fabrication and production.
· Inspect and controlling all NDT equipment and ensure that they work properly and ensure that they are calibrated.
· Inspect and controlling all welding equipments and ensure that they work properly and ensure that they are calibrated.
· Carry out radiographic (RT) interpretation.
· Carry out the required visual inspection
· Carry out magnetic (MT) tests.
· Carry out Dye Penetrated (PT) inspection.
· Issuing NDT requests, performing reports and handling over to the client.
· Follow up all the NDT procure.
· Preparing the material traceability.
Controlling the welder’s performance on the site
· Inspection and controlling the steps of all heat treatment processes applied.
· Preparing and punching the test package
· Inspection and controlling the steps of all hydro tests