mohamed fathy mohamed محمد, (NSF) - Haram, NDT Section Head

mohamed fathy mohamed محمد

(NSF) - Haram, NDT Section Head

National Steel Fabrication

البلد
مصر - القاهرة
التعليم
بكالوريوس, mechanical engineering
الخبرات
21 years, 1 أشهر

مشاركة سيرتي الذاتية

حظر المستخدم


الخبرة العملية

مجموع سنوات الخبرة :21 years, 1 أشهر

(NSF) - Haram, NDT Section Head في National Steel Fabrication
  • مصر - القاهرة
  • يناير 2008 إلى يناير 2014

2008 till now National Steel Fabrication (NSF) - Haram, NDT Section Head.
Responsible for NDT department achieving the following activities: 1. Ensuring that all tests are being performed in accordance to Company procedures and code requierments.
2. Ensure that only qualified Personals are performing the tests.
3. Plan and distribute the Requests for all NDT Personal to ensure acheiving the objectives.
4. Supervise all NDT activities.
5. Performing Tests himself and issue their reports.
6. Have the authority to reject or accept NDT tools ( i.e PT. Cans) before use.
7. Have all NDT Examiner authorities.
8. He has the authority Put and Operator or Examiners on hold regarding RT according to his radiographic doses.

25AbdoEbrahimEldesoky St., Ezbet Elnakhl Cairo, Egypt 26618635 01114618635

for the following projects: 1. Abu Qir thermal power plant.
2. Roufa cement factory (Fabricated for Tunisia)
3. Borg Elarab international Airport.
4. Nile Sugar Factory.
5. Saint Gobain glass factory.
6. Army Cement factory.
7. Steel Structure for reformer heater (Fabricated for Spain)
8. Steel Structure and duct for hot oil preheater (Fabricated for Spain)
9. Steel structure and duct for hot oil preheater (Fabricated for Greece)
10. Safwa Cement company (Fabricated for Saudi Arabia)
11. Sidi krir Power Station Plant.
12. The Solar Island of ISCC - Kuraymat.
13. Terga thermal power plant (Fabricated for Algeria)
14. Bar Mill for EZZ steel at ElSokhna.

(OCI) - Workshop complex, QC section head في Orascom Construction Industries
  • الإمارات العربية المتحدة
  • يناير 2006 إلى يناير 2008

2006-2008 Orascom Construction Industries (OCI) - Workshop complex, QC section head.
Responsible for Inspection department achieving the following activities: 1. Responsible for updating inspection procedure.
2. Follows the senior activities.
3. Responsible to ensure that the calibration procedure is fully understood and applied satisfactory.
4. Revise the inspection test plan and apply modification if required.
5. Ensuring that the Non conformance system is applied according the system requirement. for the following projects: 1. Misr Beni suef cement company.
2. Sorffert fertiliser complex (Fabricated for Algeria)
3. CIBA cement blank factory (Fabricated for Algeria)
4. Egyptian Ciment company Line-5.
5. Etebbin Thermal power plant.
6. Algeria mobile tower (Fabricated for Algeria)
7. Bazian cement company (Fabricated for Iraq)

25AbdoEbrahimEldesoky St., Ezbet Elnakhl Cairo, Egypt 26618635 01114618635

(OCI) - Workshop complex, Senior quality control inspector في Orascom Construction Industries
  • الإمارات العربية المتحدة
  • يناير 2003 إلى يناير 2006

2003-2006 Orascom Construction Industries (OCI) - Workshop complex, Senior quality control inspector.
work as Quality control senior achieving the following activities: 1. Make inspection test plan ITP according to the client requirement, code and specification.
2. Monitoring all inspectors activities.
3. Ensuring that all data provided to inspectors are controlled from document control.
4. Revising the documents with the inspectors for final release.
5. Pointing out the problems areas to be clear for inspectors.
6. Follows up the Non conformance reports till completion date. for the following projects: 1. Astra Zeneca Egypt factory.
2. Algeria Jet Fuel Tank (Fabricated for Algeria)
3. P & G Factory (Fabricated for Nigeria)
4. Talkha Thermal power plant.
5. Fjura Cement company (Fabricated for Emirates)
6. Helwan Fertilizing company
7. Ammonia Urea Suez II.

(OCI) - Workshop complex, Quality control inspector في Orascom Construction Industries
  • الإمارات العربية المتحدة
  • يناير 2000 إلى يناير 2003

2000 - 2003 Orascom Construction Industries (OCI) - Workshop complex, Quality control inspector.
work as Quality control inspector achieving the following activities: 1. Review all approved documents before welding.
2. Check fit up, correct joint design, bevelling, angles ETC.
3. Make welder audit list frequently to ensure that every welder is welding in its qualified thickness and position.
4. Carrying out dimensional and visual inspection
5. Make non-destructive test request according to the ITP requirements.
6. Raising non conformance report for the non conformable cases.
7. finalize documents (Release notes and its attachments reports) which required for every item. for the following projects: 1. Arab Union cement company (Fabricated for Lybia)
2. M'sila Cement factory line 1 (Fabricated for Algeria)
3. M'sila Cement factory line 2 (Fabricated for Algeria)
4. Ameria Cement company Line III.
5. Cairo Metro line 2.
6. Objana Cement company line 1 (Fabricated for Nigeria)
7. Objana Cement company line 2 (Fabricated for Nigeria)
8. Smart Village.

25AbdoEbrahimEldesoky St., Ezbet Elnakhl Cairo, Egypt 26618635 01114618635

Production Engineer في Metalco Company
  • مصر - القاهرة
  • يناير 1998 إلى يناير 2000

1998-2000 Metalco Company, Production Engineer.
work as Production Engineer achieving the job activities for the following projects: 1. Misr Petrolium.
2. Egyptian cement company.

Production Engineer في Steelco Company
  • مصر - القاهرة
  • يناير 1995 إلى يناير 1998

1995-1998 Steelco Company, Production Engineer.
work as Production Engineer achieving the job activities for the following projects: 1. Misr Petrolium.
2. Egyptian cement company.

(PPP), Shift Engineer في Plastic Pipes and products Company
  • مصر - القاهرة
  • يناير 1993 إلى يناير 1995

1993-1995 Plastic Pipes and products Company (PPP), Shift Engineer. work as Shift Engineer achieving the job activities for fabricate PVC pipes for different diameters.

الخلفية التعليمية

بكالوريوس, mechanical engineering
  • في Zagazig University
  • يناير 1991

1991 Zagazig University, Faculty of Engineering (Shoubra) Bachelor of mechanical engineering, power department Courses and certificates Ultrasonic Testing (UT) Radiographic Testing (RT) Magnetic Particles Testing (MT) Dye Penetrant Testing (PT) Visual inspection Testing (VT) Protection of Ionic Radiation

Specialties & Skills

DOCUMENT CONTROL
ENGINEER
INSPECTION
PRODUCTION ENGINEER
RADIOGRAPHIC
TEST PLAN
computer
computer

اللغات

العربية
متمرّس
الانجليزية
متوسط
الفرنسية
متوسط