Mohammad ELKHODARY ABDULHAMED IBRAHEM, مهندس كهرباء أول

Mohammad ELKHODARY ABDULHAMED IBRAHEM

مهندس كهرباء أول

مجوعة المهندس زكي الفارسي للإستشارات الهندسيه

Location
Saudi Arabia - Jeddah
Education
Bachelor's degree, كهرباء -قوي
Experience
31 years, 7 Months

Share My Profile

Block User


Work Experience

Total years of experience :31 years, 7 Months

مهندس كهرباء أول at مجوعة المهندس زكي الفارسي للإستشارات الهندسيه
  • Saudi Arabia - Jeddah
  • My current job since June 2012

Projects:

1.1- Revision design of electrical systems for two towers 40 floors at
FARSI(8)KSA, JEDDAH
Work description revision design of the following systems
• Lighting& power system
• LV Distribution boards
• Load schedule and cable size selection
• Voltage drop calculation and short circuit current calculations
• Stand-by generators and emergency load calculations
• Power transformer up to-1500 KVA 13.8KV 400V - dry & oil type.
• Lux calculations
• Earth protection system& lightning protection system
• Fire alarm system,
• Fiber optic Telephone systems
• IP CCTV system
• Access control system
• SMATV system.
• Video intercom system
• Sound system and evacuation systems
• Building management systems (B M S).
1.2- Revision design and supervision electrical systems for two towers 40
Floors FARSI(7) KSA, JEDDAH
Work description and responsibilities
Senior Site Electrical Engineer
• Implement the site supervision quality procedures, and review submission requirements of the project, along with the MEP contractor.
• Review all construction documents and highlight any design and contractual discrepancies with the concerned RE/SHOE.
• Ensure that all statutory authority NOC’s / permits / design approvals are available on site for construction.
• Ensure that the main contractor and nominated MEP contractor coordinate with all concerned authorities departments and ensure that their requirements are adequately and satisfactorily incorporated.
• Extend the maximum possible effort to avoid contractor(s) claims for cost and/or delay.
• Prepare process control sheet for electrical works in conjunction with SHOE during the Enabling Works / Main Contract Works.
• Review and forward any comments on all submittals including contractor design drawings, shop drawings, materials and alternative proposals submitted by contractors.
• Conduct regular (daily) site visits and supervise, certify the installation of electrical services ensuring compliance with the contract documents.
• Review and forward any comments on the contractor’s method statement for installation, execution of the works.
• Review and forward any comments on the contractor’s testing and commissioning plan / procedures / method statements.
• Any potential safety concerns identified at site shall be reported to site SHSEE / RE.
• Review the site progress and assist in the review of the contractor’s interim payment application.
• Liaise with the SHOE for the effective implementation of the quality management systems and site supervision provision activities.
• Obtain samples and quotations as required for finalization of any PS/PC Items.
• Monitor the progress of the work against the approved contractor program of works.
• Witness the testing and commissioning of all the mechanical / electrical equipment and sign off the relevant documents for acceptance.
• Verify the accuracy of the contractor’s “As-Built” drawings reflecting in details the as-built conditions and approve the As-Built drawings.
• Review and approve the contractor’s operations & maintenance manuals.
• Liaise with the Statutory Authorities and follow up all final inspection and approvals as required.
• Carry out the final inspection for certification of final completion and handing over of the works.
• Assist the discipline staff on projects in the review of submittals, specialized on-site / off-site inspections, testing and commissioning submitted by contractors.
• Assist the discipline staff on projects in the final inspection for certification and handing over the works.
• Assist the discipline staff on projects in resolving any technical issues, claims, disputes arising and requiring input for satisfactory close out.

مدير قسم الالكتروميكانيك at مؤسسة بن حرمل للمقاولات والري
  • United Arab Emirates - Abu Dhabi
  • January 2009 to June 2012

2( FROM, 1-1-2009-To 20-6-2012
Company: Bin Harmal Contracting and Irrigation Abu Dhabi UAE
Job description: Electro-mechanical Division Manager
Projects:
2.1- ALMUEJAN Tower (3 Basements, G.F, Mezzanine, 20 Typical floors, Mechanical +Roof)
C-45 E4/01 ABU DHABI
CONSULTANT: DEWNA
CLIENT: HAMOODAH BIN ALI BIN HAMOODAH AL DAHRI

2.2- CONSTRUCTION AND RENOVATION OF BMW SHOWROOM
AT UMMAL NAR ABU DHABI
CONSULTANT: ALDYAR
CLIENT; H.E. SHIEKH MOHAMED BIN BUTTI AL HAMID

2.3- Vision hotel 120 bed room (4 Basements car Parking, G.F, Mezzanine, 25 Typical floors, 2 Mechanical +Roof)
C-114 E-2 AL mina rod ABU DHABI
CONSULTANT- DAR ALKHALIJ.

Work description;
A) Tendering Stage:
Review and study of electro-mechanical designs and make sure they achieve the regulations of concerned authority.
Study the faces and deficiencies and shortcomings in project design.
Review the designer/consultant in essentials for project implementation
Study and pricing of electrical and mechanical works.


B) Construction Stage:
Preparation and issuing of Electro-Mechanical Time Table.
Overall responsibility of the project execution on time (MEP works)
Execution and supervision of MEP work as per shop drawing.
Coordination the duties of MEP site Engineers, other site staff.
Responsible and control MEP site activities on daily basis.
Collect data and performance of men, material, machinery and review.
Coordination for MEP procurement of resources.
Coordination with Planning Engineer regarding MEP works program.
Preparation of electro-mechanical estimate values and approximate final cost.
Preparation all shop drawings, coordination drawings and as built drawings
Follow-up of construction process.
Preparation of breakdown according to project time table.
Preparation of list of drawings and list of materials.
Preparation of monthly payments.
 Preparation of variations order(VO) time climes and many climes.
Hand over of projects and perpetration of hand over report.
Initial settlement of projects.
Preparation of close-out report prior submission to consultant.
Preparation of as built drawings, vendor, and equipment warranties, O&M manuals, spare parts and training program are reviewed by all disciplines prior submission to Consultant.

مهندس كهرباء أول at دائرة الخدمات الإجتماعية والمباني التجاريه
  • United Arab Emirates - Abu Dhabi
  • June 2005 to January 2009

3) FROM JUN 2005-To- DEC-2008 Dept. Of Commercial Buildings
(H.H Shk. Khalifa Bin Zayed Committee) Abu Dhabi UAE
Job descriptions: Sr Electrical Engineer
Duties: Engaged as Electro Mechanical Engineer in the capacity of the following works.
The general scope of works comprises:
* Electrical power and lighting.
* Firefighting and fire alarm systems.
* HSE requirements.
*Plumbing, sanitary and drainage works.
* Elevators and escalators.
* Water pumps and central filtration systems.
* Garbage chute systems
* Building management systems (B M S).
* Master antenna and satellite systems.
*Audio and video intercom systems as well as cameras systems.
*Water fountains and swimming pools equipments and instruments.
* Central gas systems.


Details of work:
* Design review and evaluation of new buildings projects (More than 100 projects).
*Revision of all electrical specifications and drawings.
* Study and approval of list of materials, bill of quantities and equipments submittals.
*Supervision of installations and erections and preparation of work progress reports.
*Revise, checking and approval of contractor's payments.
*Supervision, testing, commissioning and evaluation of systems performance.
* Participate in inspection and checking of new constructed projects for the purpose of preliminary and final handing over.
* Follow up and supervision of maintenance contractors to carry out the preventive, corrective and regular maintenance works in accordance with the regulations and specifications.
* Carryout routine inspections for electrical works in the buildings for approval and releasing the regular payments for contractors.
* Preparation of electrical tenders and estimating of tender prices.
* Participating in technical studies and preparation of specifications for renovations or additional works in existing buildings.
*Preparation and issuing of all letters and correspondences concerning the maintenance works.
*Documentation of all maintenance works activities by computer.

مهندس إستشاري -كهرباء at مكتب العمارة والهندسه
  • United Arab Emirates - Abu Dhabi
  • November 2002 to June 2005

4) FROM Nov-2002 to Jun-2005
Architectural& Engineering Consultants(AEC) UAE
Electrical- Design and Supervision Engineer
Projects:
4.1- Ser banyas hotel+ 5 chalet.
4.2 - 6 Commercial / Residential Buildings for Private Department for H.H. Sheikh Zayed Bin Sultan Al-Nahyan.
4.3-Three Towers for H .H Sheikh Mohammad Bin Zayed Al-Nahyan at Mina Road ABU DAHBI
4-4 -5 Palaces for H.H SHEIKH SAEF Bin Zayed Al-Nahyan ALAIN ZAKER Area

مهندس موقع-ثم رئيس قسم الكهرباء at شركة رشدي وشركاه للصيانه والمقاولات العامه
  • United Arab Emirates - Abu Dhabi
  • October 1992 to November 2002

5 ) FROM Jan-1998 to Nov-2002
Rushdie & Partners Company Abu Dhabi, U.A.E.
Head OF Electro-Mechanical Section
Duties : Pricing & Quotation of all Tenders, Installation, operation for all
Electrical projects & maintenance for all Auxiliary systems, fire-alarm systems
Public-address systems, lightning
Protection systems and structural cabling systems.

FROM 10-1992 to 31-12-1997
Rushdie & Partners Company Abu Dhabi, U.A.E.
Electrical Engineer
Duties: Installation - Operation & Maintenance for field's water
Initialization plants, pumps, control Panels, motors and lifts.
• LV Distribution boards
• Stand-by generators
• Power transformer up to-1500 KVA 11KV / 415V - dry & oil type.
• All auxiliary systems.
• Lighting& power system.
• Fire alarm system,
• Earth protection system& lightning protection system
• Telephone systems &CCTV system
• MATV system, structural cabling systems.
• Preparation all shop drawings and as built drawings.
• Pricing & quotation of all tenders for electrical projects

Training Courses:

1-Engineers registration certificate (design, installation and testing of Electrical works) (2010).
2-Basic First Aid (safety certificate -2011).
3- Basic Fire Fighting (safety certificate -2011).
4-International Computer Driving License (2007)
Others:
Auto CAD - MS Word - MS Excel -UAE Driving License.
Address: 0096654 8373861 & 00966565206906
Email: mka_2k@yahoo.com

Education

Bachelor's degree, كهرباء -قوي
  • at كلية الهندسة جامعة المنصورة
  • October 1992

Specialties & Skills

Electrical
أستخدام الاوتوكاد وبرامج الكمبيوتر

Languages

Arabic
Expert
English
Expert

Training and Certifications

دورة الاسعافات الاوليه بالمواقع (Training)
Training Institute:
معهد أبو ظبي
Date Attended:
April 2011
Duration:
8 hours
دورة الاسعافات الاوليه ومقاومة الحريق (Training)
Training Institute:
معهد أبوظبي
Date Attended:
April 2011
Duration:
8 hours

Hobbies

  • السباحة- كرة القدم- الشطرنج