Mohammed Shakeer

• Review and submit Material Technical Approvals (MTA), Technical Bid Evaluations
(TBE), material sample approvals, and other submittals to Saudi Aramco.
• Coordinate with vendors and manufacturers to ensure materials supplied meet project
specifications and Aramco standards.
• Preparation of Red line drawings and discussing the same with consultant/Clint to get
the approvals.
• Prepare and submit Technical Queries (TQ) and coordinate with consultants/designers
for approval.
• Develop shop drawings and coordination drawings with the MEP team.
• Coordinate with the procurement team to ensure required data is provided for technical
submissions.
• Review IFCs and NMR drawings before the execution of site work.
• Collaborate with structural, architectural, HVAC, and plumbing teams to incorporate
required services for building in NMR-601 and NMR-602 of precast panels.
• Review the BIM model (LOD 400) for clash detection with the BIM
Coordinator/Vendor to rectify and implement the necessary changes before submitting
for site execution.
• Preparation of material quantity take offs (BOM & BOQ).
• Review the BIM model for clash detection with the BIM Coordinator/Vendor to rectify
and implement the necessary changes before submitting for site execution.
• Designed custom solutions tailored to client-specific requirements, exceeding
expectations with creative problem-solving techniques.
• Provided technical support in both on-site and telephone consultations.
• Led engineering teams to successfully complete projects on time and within budget.
• All the installation and termination will be as per NEC, SBC401, NFPA-70,
NFPA-72, NPA-780 and SAES.

Client: Raas Mishab Royal Saudi Naval forces - FACOM Dept.
• Conduct inspections for the ongoing housing project as requested by the contractor.
• Review and approve submitted shop drawings and material submittals based on site
requirements.
• Inspect ongoing maintenance work for villas, STP plant, and desalination plant.
• Supervise upgrades for warehouse and other villas.
• Verified construction documentation to meet client requirements and vision.
• Understood and demonstrated use of basic electricity principles and electronics.
• Planned layout of electrical wiring, equipment and fixtures consistent with specifications
and local codes.

Client: of company
• Projects undertaken:
• AL SALIMI FAMILY VILLA, AL DANNAH RESIDENTIAL BUILDING, Dehran12344
• Ongoing projects: NEW LABOR CAMP NEAR JUBAIL ROAD, MIRSA DUPLEX
APARTMENT, AL SHATIE STRIP MALL
• Maintenance projects: AL SHATI VILLAS, AL RAKAH SHOWROOM
• Execute tasks defined in the approved project plan to achieve project goals.
• Oversee the complete installation of power systems, low current systems, MATV, and FA
systems.
• Prepare Material Inspection Requests (MIR) for all approved materials as per delivery.
• Prepare material submittals, including datasheets and catalogs, for approval.
• Prepare Request for Inspections (RFI) for completed works related to electrical and low
current activities.
• Handle documentation work, including preparation of material requirements and site
mobilization plans.
• Maintain files related to approved shop drawings and materials received from the consultant
or client.
• Calculate the actual quantity of materials based on shop drawings and create Material
Requests (MR).
• Obtain approval from the client and consultant for electrical materials.
• Prepare shop drawings and coordination drawings, collaborating with other disciplines to
resolve conflicts and ensure smooth project execution.
• Utilize effective leadership, communication, and interpersonal skills, with strong analytical
and problem-solving abilities.
• Inspect materials upon arrival to ensure compliance with approved samples and submittals.
• Evaluated electrical installations and systems to isolate faults and implement corrective
actions.
• Provided technical support to colleagues on complex issues, assisting them in finding
efficient solutions to problems.
• Inspected completed installations to observe operations and verify conformance to design
and equipment specifications.
• Calibrated and repaired existing systems to maintain functionality.

Client: Agility, Noon, Amazon, etc.
• Understanding contract document SOW, work accordingly and reporting to client.
• Respond to customer complaints, provide service and support during site visits to drive
service success.
• Managing all on-site installation, commissioning, inspection, repair, maintenance task.
• Complete Installation of Dock Leveler as well as its servicing and maintenance.
• Knowledge of Servicing and maintenance of VINCA Goods lift.
• Knowledge of maintenance of Pick to Light (PTL) system.
• Complete installation of Mobile raking system and trouble shooting.
• Monitors performance of the products, provide regular reports and feedback on their service
requests.
• Increased equipment uptime by efficiently diagnosing hardware malfunctions and
performing necessary repairs or replacements.
• Coordinated effectively with remote support teams to resolve complex technical issues in a
timely manner.

• Monitoring of all types of Electrical Wiring, Cabling, EMT Piping, Trenching, Cable gland,
Panel & Connections.
• Responsible for power cables & control cables installation and termination.
• Responsible for continuity and Megger test on cables as well as in motors.
• Responsible for termination of MV & LV cables in Transformer & Switchgear panels.
• Skilled in the installation and termination of electrical panels and motors, as well as
performing ongoing maintenance to ensure optimal performance and reliability.
• Undertaken test for MDB and SMDB for Panel like hi-port test, megger test also sometime
current injection test.
• Execute the assigned job activities as per schedule.
• Control Panels incorporate PLC, VFD & Chillers.
• 3.3 KV Switchgear panel, 400 HP Blowers & its controls (including PLC & SCADA).

• Application experience with PLC, electrical automation, sensors, controls, industrial
controls and automation components.
• Responsible for erection, testing, trouble shooting, commissioning and operation support of
electrical equipments.
• Hands-on experience in maintenance and troubleshooting of PLC system and other I/O
devices.
• Experience in PLCs such as SIEMENS (Simatic S7-200), SCHNEIDER ELECTRIC
TWIDO.
• Troubleshooting the faults arising in the Blow Molding machines.
• Involved in Power panel, Local Control panel, Distribution panel installation and pre
commissioning work.
• Installation of conduits, cable trays, cables laying, cable splicing, cable termination,
transformers, motors, switch gear, MCC, control panels, control cables, earthling cables,
lightening systems, fire alarm, fire brigade equipments etc…
• Involved in Motor installation and pre commissioning (IR test, Winding Resistance test,
rotation check, vibration check, bearing temperature check, RPM check and Functional
test).
• Promote awareness of the Company Health, Safety, Environmental & Quality policies and
procedures to achieve fit-for-purpose Construction and Commissioning engineering.
• Up to 110 KW pumping stations & its controls including VFD, PLC & SCADA.
• Projects Undertaken: Main Contractor-AL CONTRACTING, Project-Installation of
GRP lining at CGP water tank and Cooling Tower Basin-Zone-4-Alain international
airport. Size of team-25- worked as Site Engineer. Main Contractor Project-Installation of GRP lining for holding tank and
Fire tank Jumer-1, size of team 10nos, worked as Project Engineer. Main Contractor-TAV, Project- Lining, installation of ladders for Tower B and
Tower C DAMAC properties. Contractor-EMIRATES Project- Repair work of water tank, Worked as
Project Engineer.
• Performed maintenance procedures and repairs on existing electrical products and systems.

• Planning and organizing the team during the installation of new machines.
• Installation, Operation & Maintenance of all electrical equipments & machineries.
• Engage with other departments prior to maintenance activities to discuss issues and plan
necessary actions.
• Handle breakdowns of electrical equipment, including LV motors, MCCs, soft starters, and
field instruments, ensuring quick identification and resolution of issues.
• Perform predictive, preventive, and corrective maintenance on electrical systems with
minimal supervision, ensuring reliability and minimizing downtime.
• Understanding and assigning works from plans, sketches and drawings.
• Maintenance of 16t/n &18t/n Boilers and its auxiliaries, compressors, blowers, PLC
controlled production/process machineries & equipments.
• Bottling & Packaging Section Maintenance (SHRINK SLEEVE WRAP M/C).
• Maintenance & troubleshooting of Injection Molding and Extrusion Blow Molding
machine.
• Well balanced knowledge of crystallization process, Plant maintenance, sketches and
drawings.
• Installation and calibration of Electromagnetic flow meters, Radars, Level sensors.
• Hands-on experience in installation and testing of MCB, MCCB, RCCB and ELCB.
• Adequate exposure with injection & blow molding machine control drawing & system.
• Maintaining the documents, updating the reports on daily basis for consumption and
production output.
• Developed and implemented effective maintenance schedules for electrical systems,
ensuring optimal performance at all times.
• Documented maintenance activities and confirmed compliance with relevant regulations.
• Dismantled defective machines and equipment and installed new or repaired parts.

• Prepare detailed inspection reports for all electrical-related work prior to execution.
• Planning, inspecting electrical equipments and organizing the team during the installation
of new wiring system.
• Understand IFC drawings and prepare detailed shop drawings prior to the execution of
work.
• Undertake tasks related to electrical work, including cable pulling, building wiring, and
structural cabling, ensuring proper installation and compliance with safety standards.