Mohammed Asfaque Alam

+ KOC SCADA Project ~ North Kuwait

• Assessing hazards of shutdown maintenance tank work and taking mitigation.
• Ensure Company safe work practices implementing.
• Ensure to fallow IMS (integrated management system)
• Conduct training of new staff.
• Attend weekly monthly meeting. Conduct presentation during Minutes of meeting.
• Conduct Audit
• Participate incident investigating reporting system.
• Review the risk assessment.
• Make weekly and monthly report.

• KNPC Maintenance Project at Local Marketing Sabhan Depot.

Total 15 years’ experience in Oil & gas and refinery fields in
Technical area of work: Refinery, Petrochemical and fertilizer, Oil & Gas processing, Water Injection
Facilities project, Pump station and all of the construction.
1. Worked with ESSAR (SPES JV) Company as a HSE Engineer for Al zour NRP Project Kuwait From 10th January 2019 to 20 April 2023.

• Ensure project HSE plan and Company safe work practices implement.
• Observed unsafe act & condition and rectification accordingly.
• Performed work permit reviews, behaviors-based safety and job site safety compliance inspection.
• Prepare weekly, monthly report and submit to client and ensure to update HSE statistics board.
• Prior to start job, ensure that MS & RA has been prepared and job is safe for executing.
• Prior to start the job, ensured that MS & RA prepare, and Job is safe for executing.
• Inspect the lifting appliance & equipment, electrical devices prior to executing the job.
• Inspect and review the hydrotest job activities.
• All critical activities assessed prior to start the activities.
• Ensured Mobilized personnel have done mandatory training and holding the PPE.
• Ensure to taken all precaution of confined space hazards.
• To investigate the near miss, incident and take a preventive measure to avoid same occurrence in the future.
• Ensured equipment third party certificates & Safety certificates prior to mobilize at site.

• KIPICAI Zour NR Project

Ensure work permit system is fallow.
• Ensure site welfare facilities availability & maintained.
• To ensure work crew aware about environmental aspect and impact.
• Promote safe execution of work on site and provide and provide environment and safety
induction trainings briefing to workers.
• Investigate all accident, incident & near miss and take necessary recommendation.
• To review each site activities through risk assessment system on all work process and if required
brief those concern on the precaution measures.
• Monitor the site and incase of unsafe act & condition instruct concerned crew to work safely
fallow KIPIC safe work practices, report superior if required concerned crew further training.
• Conduct site walk through and send presentation report to concerned group for rectifications.
3. Worked with M/S SK E&C (JGSK JV) Company as a Safety Supervisor, Clean fuel (CFP) project Mina
Al Ahmadi, Kuwait from 22nd

Attending meeting with client and resolving issue.
• Managing all aspects of Health, Safety and Environment independently.
• Participate to make the risk assessment.
• To make the training materials.
• Prepare HSE documentation requested on the basis of the contractual procedures.
• To ensure that new staffs are familiarized about KNPC procedure and permit to work. System /
conduct the training of new commerce.
• To conduct the skill training for existing employees.
• To make weekly and monthly statistics report and submit to client.
• To ensure that monthly report to display on statistics board.
• To monitor the site activity and ensure work is carry out as per KNPC safe work practices.
• To evaluate the hazard and take correct mitigation.
• To ensure job is carry out as per client safe work practices.
• To investigate the near miss and take a preventive measure to avoid same occurrence in the
future.
• To coordinate with the client and ensure all safety matter going on the track.
• To know tie in work activity.
• To familiar of emergency preparedness act.
4. Worked with M/S Daewoo E & C (FDH JV) Company as a Safety Supervisor for CFP project Mina
Abdulla refinery Kuwait from 20th
October 2014 to 4th
December 2015.
Job Responsibility
• Attending meeting with client and resolving issue.
• Participate to make the risk assessment.
• To make the training materials.
• To ensure that new staffs are familiarized about KNPC procedure and permit to work. System /
conduct the training of new commerce.
• To conduct the skill training for existing employees.
• To make weekly and monthly statistics report and submit to client.
• To ensure that monthly report to display on statistics board.
• To monitor the site activity and ensure work is carry out as per KNPC safe work practices.
• To evaluate the hazard and take correct mitigation.
• To ensure job is carry out as per client safe work practices.
• To investigate the near miss and take a preventive measure to avoid same occurrence in the
future.
• To coordinate with the client and ensure all safety matter going on the track.
• To know tie in work activity.
• To familiar of emergency preparedness act.
5. Worked with M/S Daelim Industrial CO, . LTD in Kuwait as a Safety Supervisor for LPG Train - 4
Project from 15th
July 2013 to 30th
September 2014.

Refer to cv

Clean fuel Project (CFP) Mina Al Abdulaa KNPC

Refer to cv

+ LPGtrain-4 Mina Al Ahmadi KNPC

Project Name : Khurais water injection facilities & utilities (KUC)
Main Contractor : Snamprogetti (A Company of Saipem)
Proponent Client : Saudi Aramco from 7th

Khurais water injuction facilities & Utilities (KUC)

Project Name : Dolphin onshore upstream facilities project
Main Contracter : JGC & DOLPHIN
Duration : 11th

Tam responsible for supporting the Project Manager in the effective implementation of OH&S requirements,
ensuring compliance with company SWP across all project phases.
My key responsibilities include:
1. Ensured compliance with company HSE policies, regulatory requirements, and client (KNPC) standards by
supporting the Sr. HSE Manager in managing and enforcing OH&S requirements across all project activities.
Ensured all PPE provided to employees and subcontractors met intemational quality standards (for example
ANSI) and client requirements before site distribution by conducting inspection and verification of PPE
batches, confirming compliance with technical specifications.
3. Established inspection checklists for scaffolding, lifting equipment, fire protection systems, and other safety~
critical equipment to guarantee quality workmanship directly contributing to safe operations.
4. Developed HSE training modules to meet competency standards, incorporating trainee feedback, assessment
of effectiveness, and structured retraining to close identified gaps.
5. Reviewed and approved subcontractor HSE plans and verified their compliance with contractual obligations,
client requirements, and international safety standards before site mobilization.
6. Reviewed and supported the preparation of Critical Task Risk Assessments (CTRA) for high-risk activities,
ensuring hazards were identified, mitigated, and CTRAS were effectively implemented during execution.
7. Implemented project-specific HSE, Waste Management, and Site Emergency Evacuation Plans, ensuring all
site activities were executed safely and in compliance with regulatory, client, and company requirements
8. Prepared and submitted monthly Safety Reports, HSE Statistics, and KPls, ensuring accuracy and
compliance with client and company requirements: ensured all subcontractors established and maintained
statistical data on HSE and training.
9. Coordinated with subcontractors and client Safety Engineers for equipment inspections, certification
renewals. and record maintenance.
10. Provided advice and guidance to subcontractor management on HSE issues; maintained communication with
supervision teams and actively participated in HSE committee meetings
11. Maintained a safe working environment throughout all project phases by proactively identifying hazards.
promoting safe work practices, and ensuring full compliance with HSE requirements
12. Organized and conducted HSE audits, assigned monthly audit tasks to site safety supervisors, and ensured
timely implementation and follow-up of audit recommendations and corrective actions.
13. Conducted job site inspections, safety walkthroughs, and pre-demolition inspections jointly with contractors,
subcontractors, and client representatives to ensure compliance and address unsafe acts or conditions
14. Planned. organized. and conducted safety campaigns and promotional activities to enhance HSE awareness
and foster a proactive culture across project personnel
15. Developed and implemented monthly HSE training schedules for EPC and subcontractor personnel, covering
safety. quality. and compliance requirements.
16. Prepared, updated. and maintained HSE documentation for internal and extemal audits, ensuring records.
were accurate, up-to-date, and client-compliant
17. Oversaw the proper handling. storage, and disposal of waste materials, ensuring regulatory compliance and
availability of Safety Data Sheets (SDS),
18. Acted as Emergency Response Coordinator (ERC) during drills and actual emergencies, performing all
duties aligned with the Emergency Response Plan (ERP) and evacuation procedures.