QA/QC Electrical Engineer/Inspector Aramco Approved CBT pass SAP#80016267
Intertek
مجموع سنوات الخبرة :10 years, 8 أشهر
Performed duties in accordance with applicable standards, policies, and
regulatory guidelines to promote a safe working environment.
Identified issues, analyzed information, and provided solutions to
problems.
Devoted special emphasis to punctuality and worked to maintain
outstanding attendance record, consistently arriving to work ready to start
immediately.
Conducts regular inspections on the scheduled activities and makes
necessary reports.
Reviewing of Material Approval request (MAR) for materials as per Design
criteria/Standards.
Review Quality Documentation (ITP, Procedures, Drawings & Vendor Data
Sheets, Material Specifications, and other Quality related documents
submitted by Implementation Contractors) Pertaining to Electrical
activities.
Material receiving inspection of switchgear as per Maaden specification
and Witnessed the Installation of MV, LV Switchgear.
Material receiving Inspection of cable ladder and Inspection of cable ladder
installation as per NEMA VE2.
Reviewing of IFC drawings packages and verifying as per standards/
specification.
Inspection of outdoor lights (road light, streetlight, wall lights) as per client
requirements/Standards.
Witnessing the Installation, Testing, and commissioning of transformers
(3MVA) activities, MV and HV cable pulling, Termination, and testing at the
site as per Client standards and procedures.
Witnessing the Installation of HV, MV, and LV cables above the grade &
below the grade as per standard installation and inspection of all
terminating of HV cables as per client standards and Procedures.
Responsible for incoming materials Inspection with respect to approved
specifications, Datasheets, Material Approval, and quality plan.
Witnessing the Installation and testing of Ring Mian Unit (RMU’s).
Inspection of electrical works on Low Voltage, Sub-stations, MDB’s.
Inspection of Building indoor & outdoor lighting, Power GPO(General
Purpose Outlets), LPPB(lighting Power Panel Board) and MDB(Main
Distribution Board), Large & Small Power, Fire Alarm, Telephone & Data,
Submission of Daily, weekly, and monthly reports.
Monitoring and supervising the activities of Load Switch and field panels.
Arrange/attend the meeting with main contractors and sub, main
contractors to discuss issues related to Engineering, construction, and
quality.
Follow up & Inspection for installation of all electrical systems (lighting -
power - cable routing System - electromechanical works coordination -
Earthing - lightning Protection, CCTV, DATA, TELEPHONE
CENTRALIZED SYSTEM, SMATV, and Video Intercom system).
Inspection of Cables, Cable Trays, Conduits, Cable Run systems (U/G) -
Duct banks, Manholes, Cable Trenches, etc.
Inspection of Local Control Panels, JBs(Junction Box), PB Stations, etc. as
per drawings and specification.
Perform Routine Surveillance, Quality Control Inspection of construction
activities at various Inspection Stages such as Pre-Installation, Installation
& Pre-Commissioning, and Final Inspection for various electrical
equipment.
Witness various Electrical Tests (mentioned below) and verify the Test
Reports.
Promptly report unresolved quality deficiencies to Project Field Engineer,
QA/QC Manager for further action.
Issue of NCRs and implementing the corrective actions in conformance
Conducts regular inspections on the scheduled activities and makes
necessary reports.
Preparation of Quality related documents as per client’s requirement such
as Quality control plan, ITP, Method statement, and related work
instructions and liaison with the client for the approvals.
Inspection of complete 133MVA Transformer 3-winding Transformer
230/34.5/13.8KV SAT tests, Installation and Testing activities • MV and HV
cable pulling, Termination, and testing at the site as per SABIC standards
and procedures.
Reviewing of Material Approval request (MAR) for materials as per Design
criteria/standards.
Arrange/attend meetings with main contractors and sub-main contractors
to discuss issues related to Engineering, construction, and quality.
Inspected the installation of MV/LV-Transformers, Switchgears, MCCs,
Motors, Cable Bus Ducts, Power Cables, etc., and also material receiving
for the above materials.
Inspected the installation of DC System - UPS, Battery Chargers, Storage
Batteries, Diesel Generator Set, etc.
Witness various Electrical Tests (mentioned below) and verify the Test
Reports.
Preparation / Evaluation of Test Packages; Punch list preparation and
clearance with clients.
Preparation / Evaluation of As-Built Drawings; Preparation of Final
Dossiers.
Issue of NCRs and implementing the corrective actions in conformance
with the client’s standards & Specs.
Monitoring of cable pulling cable dressing cable termination.
Surveillance inspection for installation of switchgear 13.8kv, auto transfer
switch, battery charger, Emergency diesel generator, and lighting panel.
Issued Violation, Pro-Active Notification and General comments for daily
reporting input in the
Worked to maintain outstanding attendance record, consistently arriving to
work ready to start immediately.
Preparation of Quality related documents as per client’s requirement such
as Quality control plan, ITP, Method statement, and related work
instructions and liaison with the client for the approvals.
Discuss and resolve the problems associated with measurement variables
in the datasheet with the process people
Liaison at all levels with Vendors, Client, Consultants, and Subcontractors
& incorporation of various systems.
Issue of NCRs and implementing the corrective actions in conformance
with the client’s standards & Specs.
Doing inspection for all Electrical systems as per procedure and ITP.
Worked to maintain outstanding attendance record, consistently arriving to
work ready to start immediately.
Monitoring daily Electrical installation and testing activate and verify that it
complies with the specification.
Supervises electrical works on Low Voltage, Sub-stations, MDB’s and
switch gears. Monitoring, buildings lighting system maintenance, and the
whole electrical system of the project.
Discuss and resolve the problems associated with measurement variables
in the datasheet with the process people
Lead at an Engineering level, ensuring risk assessment and permit
requirements.
AFC Drawings evaluation, Maintain and verify the resources and
documents.
Planning and Scheduling, Field Change Notification for changes from AFC
Drawings.
Supervision of all the activities for various electrical equipment’s
transformer, switchgear, Panels, etc.
Attending weekly and monthly Progress meetings with the Project
Manager.
Coordination with different vendors and assist in commissioning activities.
Preparation of As-Built Drawings, Executing Construction, and punch list
activities.
Arranging & Distributing Manpower, Equipment’s, Vehicles for Construction
sites.
BscBE Electrical Power Engineer