Technical affairs deputy manager
Fayum Gas
Total years of experience :22 years, 6 Months
• Managing a team of two engineers, 3 Technicians & 10 Surveyors.
• Participating in different phases of projects such as (Network design, tendering, costing, & Construction
management.)
• Selection & reviewing of best natural gas pipe route according to design standards, such as ASME B31.1, B31.3,
B31.8, IGE (TD1, TD3, &TD4).
• Preparing both technical & economical studies for new (projects, cities, areas, .... Etc)
• Preparing financial proposals to be issued to (CNG, Industrial, Commercial) clients.
• Participating in new natural gas distribution studies.
• Reviewing of LP gas networks design for domestic sectors issued by department.
• Reviewing of HP gas networks design for (domestic sectors, industrial area, & Commercial clients) issued by
department.
• Reviewing of construction & As-built maps issued by the department.
• Reviewing All design networks using Synergee gas (stoner software).
• Selection of Regulators & flow meters according to clients data ( Flow, pressure, Diameter).
• Reporting to the General Manager with primary resposibility for all Technical Issues concerning Design & Quotations Activities.
• Preparing technical and feasibility studies for the new projects.
• Supervising final drawing sheets for gas pipeline using Auto-cad.
• Providing solutions for all design stages problems that might face Execution members.
• Evaluate pricing and expenses for the approved design to be limited within project budget.
• Selection of best service routes for domestic, commercial, & industrial customers.
• Determine data required for gas pipeline design such as: Source & Terminal pressures, Existing fuel consumption and number of customers. Accoriding to NFPA 54
• Piping sizing and it’s calculations through LP gas network Tables according to NFPA 58
• Selection of Regulators type & capacity, flow meters, Tanks Capacities and Quantity according to Gasco filling policies .
• Meeting the dead time of our client's proposal handing meeting.
• Guiding our client and clearing the way to him to issue the right official papers to be delivered to GASCO.
• Finalizing and solving all issues Concerning Gasco (The National Gas & Manufacturing Company) Regarding the following:
Tank's Location Approval.
Tank's Inspection.
All Correspondence between Clients, Gasco & Rawafd.
Reporting to the General Manager with primary resposibility for supervising of all assigned team members (Engineers - Supervisors - Formen), comprising deal with owner and consultant engineer and prepare inspection sheet and procedures to any gas pipeline project as follows :
Study with planning & cost engineer required manpower and equipments
Checking with the material control engineer all required materials assigned to the project.
Study and review pipeline design, shop drawings and scope of work with the design engineer.
Put project execution strategy schedules for procurement-construction methods and planning, within target settings and management of sub-contractors .
Following up all daily installations (external, internal, and conversions).
Checking whether all construction activites going with the scheduled plans and procudures .
Interacting with engineering staff and contractors to ensure effective coordination of new NG connections.
Taking part in feasibility studies for new Natural Gas projects.
National Gas Co. (NATGAS)
Assistant manager for Design & Marketing Dept.
September 2005 - Now
Job duties: -
• Preparing the Marketing plan every year to put our hand and to develop the right contacts of lucky clients to switch to natural gas.
• Initial Surveying for industral zones, commercial areas, & New Resorts, so we have usually an updated database for New customers.
• Preliminary meetings with customers, to begin our presntation Regarding benefits of using natural gas instead of other types of fuel.
• Pipeing Design: Preparation of plot plan, routing and developing of isometric under British Standards.
• Piping Sizing and its calculations and matrial take off using computer program, like stoner (Synergee)
• Supervising the final drawings sheets for gas pipline using (AUTOCAD)
• Determine the data required for gas pipeline design, like source and terminal pressure, existing fuels consumption and number of custmers.
• Planning and preparing proposals which will be send to customer.
• Marketing for proposals to persude customers switching from other fules to Natural Gas, explaning its environmental and economical benefits.
• Meeting the dead time of our client's paoposal handing meeting.
• Preparing & finalizing the agreement contarcts with customers.
• Guiding the customer and clearing the way to him to issue the right official papers to beging of preparing the commissioning contracts.
• Preparing & finalizing the commissioning contracts with both customers & Goverrnment (Egyptian Natural Gas Holding Company) ---EGAS according to type of customer, consumption, and activities)
• Meeting the dead time of our client's proposal handing meeting.
• preparing tenders main envelops (Technical & Financial) for main & Huge projects we are going to participate)
• Participating in preparing of most tenders issued by the company.
• Considering HSE in all work activities.
Deputy Manager Works as a Pipeline Design Engineer:
Job duties: -
• Design natural gas distribution pipeline network according to the Institution of gas engineers.
• Design of main transmission lines feeding pressure reduction stations.
• Design of natural gas internal piping Networks and service line for many factories.
• Mechanical engineering detail for pipeline construction.
• Specify material take off for piping according to ASME&GIS.
• Design many project of pipelines (Internal, External distribution network and installation network) like: • Sectors of network in Elmokattam, October, Elsalam.
• Many of villages in El-sheikh Zayed city.
• Installation network.
• specify stress analysis of pipeline network.
2. Al-Farouk for Engineering Works Co.
• Follow up Engineer.
December 2004 - September 2005
Job duties: -
• Preparing essential documents for the tenders which we are going to Participate.
• Translating Site's work including ( digging, laying cables, PVC Pipes, Trenching and all other works to money by receiving reports from sites weekly and issue the same but with money value to the Projects Director.
• Preparing the executed work percentage & invoiced percentage for the whole project and updating it monthly, so that we can view our situation and taking some decisions regarding the current situation as it should suit our cash flow.
• Preparing a cash flow for the coming project.
3. Sinimmar Trading Establishment
Product Development Engineer.
February 2004 - December 2004
Job duties: -
• Working as a Consultant for the FlexLink Conveyor Systems through the Following Procedure: 1. Preparing Customer Database which allows me to classify Our Customers According to Application, Industry
(Pharmaceutical, Food stuff, Beverages, etc ) and Capacity (small to Huge Companies)
2. Selling Process
3. Designing for the Required Conveyor System using some Design programs such as AutoCAD 2D, 3D and Flex Cad Program According to Factory Layout, Location of Machines, Capacity and Speed of Machines, and Product Specifications (Size, weigh& dimensions)
4. Selecting of the Required Conveyor Components and Ordering the Same from Our Principle.
5. Installation on Site
Location: Dubai, United Arab Emirates
4. United Engineers Co.
Product Development Engineer.
October 2002 - January 2004
Job duties: -
Design and installation of FlexLink Conveyor systems
Trained with the exclusive distributer in the middle east (Dubai)
Komat'su for heavy Trucks
Service Engineer.
September2001 - October2002
Job duties: -
1-Maintenance of mechanical parts for heavy trucks Such as: • Excavators
• Greeders
• Loaders
• Dump trucks
2-Reporting to workshop chief and in his absecnce to General Manager.
SKILLS
Computer Skills
• AutoCAD 14, AutoCAD 2002 (2D&3D)
• Ms office (word, excel, powerpoint)
• G.W.Basic (analysis of networks)
• Flex Cad.
• Synergee (stoner applications)
• Geomedia
B.Sc. of Mechanical Power Engineering, Faculty of engineering, Helwan University, May, 2001, Cairo, Egypt. Graduation Project: Performance of 112-Diesel Engine (By using Diesel Fuel, Jojoba raw oil & Jojoba oil with additives which are: (Amyl Nitrate, Plexol-150 & ACPA Go2) Grade of Project: "A" Excellent