كلما زادت طلبات التقديم التي ترسلينها، زادت فرصك في الحصول على وظيفة!

إليك لمحة عن معدل نشاط الباحثات عن عمل خلال الشهر الماضي:

عدد الفرص التي تم تصفحها

عدد الطلبات التي تم تقديمها

استمري في التصفح والتقديم لزيادة فرصك في الحصول على وظيفة!

هل تبحثين عن جهات توظيف لها سجل مثبت في دعم وتمكين النساء؟

اضغطي هنا لاكتشاف الفرص المتاحة الآن!
نُقدّر رأيكِ

ندعوكِ للمشاركة في استطلاع مصمّم لمساعدة الباحثين على فهم أفضل الطرق لربط الباحثات عن عمل بالوظائف التي يبحثن عنها.

هل ترغبين في المشاركة؟

في حال تم اختياركِ، سنتواصل معكِ عبر البريد الإلكتروني لتزويدكِ بالتفاصيل والتعليمات الخاصة بالمشاركة.

ستحصلين على مبلغ 7 دولارات مقابل إجابتك على الاستطلاع.


تم إلغاء حظر المستخدم بنجاح
محمد علي كالامولا فالابيل, Instrumentation QA / QC Inspector

محمد علي كالامولا فالابيل

Instrumentation QA / QC Inspector·Daelim Saudi Arabia

الهند

بكالوريوس, Applied Electronics & Instrumentation Engineering

الخبرة العملية

مجموع سنوات الخبرة: 10 سنوات, 7 أشهر

Instrumentation QA / QC Inspector

أغسطس 2018 - يناير 2020

Daelim Saudi Arabia

الجبيل، المملكة العربية السعودية

أغسطس 2018 - يناير 2020

Project : Expansion Project
 Responsible for Pre-Commissioning and Commissioning activities including the energization and operation of all kind of instruments and packages.
 Responsible for OTP of different kinds of Pumps and Motors as a part of commissioning activities.
 Completed Dry-Out activities of Thermal Reactor, TGT Heater and Incinerator as a part of Commissioning activity.
 Responsible for the Function Test for DCS, PESS, COMPLEX and SEQUENCE interlocks.
 Co-ordinate with process department for ensuring that any changes made in the Logics and P&ID should meet client requirement.
 Responsible for troubleshooting the problems occurred in the instruments during commissioning.
 Responsible for Pre-Loop Checking and Final Loop Checking of different types of instruments including transmitters, Control valves, ESVs etc.
 Responsible for replacement of Custody Transfer Flow meters in JUPC.
 Responsible for reviewing, checking and verifying the construction drawings, P&ID, ILD, and other attachments.
 Responsible for the Testing and Inspection of Transmitters, Control Valves, ON-OFF valves, Hand Valves, Speed Valves, Indicating instruments like TIs, PIs, PDIs, Pressure switches, DP switches, Level switches etc.

مجال الشركة:
استخراج الغاز والنفط الخام
الدور الوظيفي:
مراقبة الجودة

Instrumentation QA / QC Engineer

مايو 2015 - يونيو 2018

Sadara Chemicals Company

الجبيل، المملكة العربية السعودية

مايو 2015 - يونيو 2018

Project : Isocyanates Facilities Project (Chem II)

 Responsible for Calibration of all types of Transmitters, Control Valves, Gauges, switches etc.
 Ensuring that work is being carried out as per specification and approved drawings.
 Responsible for meggering and continuity check of the control cables from instruments to JBs and from JBs to Marshelling Panels.
 Inspection of all the connections as per the tagging of the instruments in the panel connection sheets from the panels to JBs and from JBs to the instruments.
 Co-ordinate with other discipline quality control inspectors for ensuring that all other discipline activities that require inspection within the Instrumentation construction program have been inspected and approved.
 Redlining the drawings, termination schedules, Instrument Loop Diagram (ILD), Datasheets etc., as per the modifications made on site.
 Prepare new Hook up drawings for any modifications and take the approval from the client.
 Co-ordinating with the commissioning and construction department for mechanical completion.
 Ensure that the loop folder submitted by the contractor contains all the relevant documents needed during the loop check.
 Arrange/attend meeting with contractors to discuss issues related to Engineering, Construction and Quality.
 Co-ordinate/follow up with the contractors to clear the A-punch items prior to commissioning of a system.

مجال الشركة:
النفط والغاز
الدور الوظيفي:
مراقبة الجودة

Instrumentation QA / QC Engineer

يناير 2014 - مارس 2015

Hanwha Engineering & Construction

ينبع، المملكة العربية السعودية

يناير 2014 - مارس 2015

Project : Marafiq Power and Water Project, Y-2

 Responsible for inspection offield mounted Instruments, JBs etc. and their cable termination till marshalling panels.
 Responsible for installation and termination of different types of instruments including different types of transmitters, control valves etc.
 Checking and Inspection of Meggering and Continuity of Instrument cables at the Lay down yard before sending for termination jobs.
 Responsible for Material Receiving Inspection soon after the delivery, with the client.
 Inspection of the calibration of different types of transmitters and other instruments like control valves, pressure gauges etc.
 Inspection for Punch listing, Processing and Updating of QC documentation etc.
 Responsible for the various RFIs (Request for Inspection) and closing of all punches lists raised by the client.
 Co-ordinating with Planning and contractors to achieve the job done on expected time.
 Checking the daily progress report and forwarding it to management.
 Co-ordinating with all field supervisors and making plans to get job to done more efficiently.
 Co-ordinating with subcontractor for all type of construction jobs.
 Co-ordinating with sub-contractor, QC Department and client for day-to-day loop check activities.
 Organizing the instrument foreman / technician of team to rectify the punch list items and to do as built the drawings maintaining the proper records for the system turn over.
 Inspection for the installation of field mounted instruments, JBs, local panels and continuity check for instrument cables.
 Inspection for the installation of F&G Systems in the field such as Push Button, Horn & Beacon and Fire Detection Systems.
 Making progress monitoring reports and sending to client.
 Effectively co-ordinates with other related disciplines.
 Supervision of construction works like cable trays installation, cable laying, cable termination of JBs, cable glanding etc.
 Supervision of placement of all existing cables from the panels to the JBs and from the JBs to the field instruments.
 Well familiar with the level, flow, pressure and temperature measurement techniques and their methods.
 Installation of various field instruments like Transmitters, Control Valves, Shutdown Valves, Thermocouples, RTDs, GDFs, GDTs, MPSs etc.
 Preparation of different types of Technical Reports for the client after contacting the vendors and discussing with the project manager.
 Conversant with various symbols and standards.

مجال الشركة:
النفط والغاز
الدور الوظيفي:
مراقبة الجودة

Instrumentation Engineer (Commissioning)

نوفمبر 2012 - أكتوبر 2013

Daelim Saudi Arabia

الجبيل، المملكة العربية السعودية

نوفمبر 2012 - أكتوبر 2013

Project : Jubail Export Refineries Project Pkg. #2B - SATORP

 Responsible for Pre-Commissioning and Commissioning activities including the energization and operation of all kind of instruments and packages.
 Responsible for OTP of different kinds of Pumps and Motors as a part of commissioning activities.
 Completed Dry-Out activities of Thermal Reactor, TGT Heater and Incinerator as a part of Commissioning activity.
 Responsible for the Function Test for DCS, PESS, COMPLEX and SEQUENCE interlocks.
 Co-ordinate with process department for ensuring that any changes made in the Logics and P&ID should meet client requirement.
 Responsible for troubleshooting the problems occurred in the instruments during commissioning.
 Responsible for Pre-Loop Checking and Final Loop Checking of different types of instruments including transmitters, Control valves, ESVs etc.
 Responsible for replacement of Custody Transfer Flow meters in JUPC.
 Responsible for reviewing, checking and verifying the construction drawings, P&ID, ILD, and other attachments.
 Responsible for the Testing and Inspection of Transmitters, Control Valves, ON-OFF valves, Hand Valves, Speed Valves, Indicating instruments like TIs, PIs, PDIs, Pressure switches, DP switches, Level switches etc.

مجال الشركة:
النفط والغاز
الدور الوظيفي:
الهندسة

Instrumentation Engineer

نوفمبر 2011 - نوفمبر 2012

Daelim Saudi Arabia, Al- Jubail, KSA

الجبيل، المملكة العربية السعودية

نوفمبر 2011 - نوفمبر 2012

Project : Saudi Kayan - LDPE

 Responsible for Calibration of all types of Transmitters, Control Valves, Gauges, switches etc.
 Ensuring that work is being carried out as per specification and approved drawings.
 Responsible for meggering and continuity check of the control cables from instruments to JBs and from JBs to Marshelling Panels.
 Inspection of all the connections as per the tagging of the instruments in the panel connection sheets from the panels to JBs and from JBs to the instruments.
 Co-ordinate with other discipline quality control inspectors for ensuring that all other discipline activities that require inspection within the Instrumentation construction program have been inspected and approved.
 Redlining the drawings, termination schedules, Instrument Loop Diagram (ILD), Datasheets etc., as per the modifications made on site.
 Prepare new Hook up drawings for any modifications and take the approval from the client.
 Co-ordinating with the commissioning and construction department for mechanical completion.
 Ensure that the loop folder submitted by the contractor contains all the relevant documents needed during the loop check.
 Arrange/attend meeting with contractors to discuss issues related to Engineering, Construction and Quality.
 Co-ordinate/follow up with the contractors to clear the A-punch items prior to commissioning of a system.

مجال الشركة:
النفط والغاز
الدور الوظيفي:
الهندسة

Instrumentation Engineer

ديسمبر 2010 - أغسطس 2011

Saudi – German JC Eckardt Co. Ltd., Al-Khobar, KSA

الخبر، المملكة العربية السعودية

ديسمبر 2010 - أغسطس 2011

Project : JUPC- (Ethylene and U&O.)

 Responsible for inspection offield mounted Instruments, JBs etc. and their cable termination till marshalling panels.
 Responsible for installation and termination of different types of instruments including different types of transmitters, control valves etc.
 Checking and Inspection of Meggering and Continuity of Instrument cables at the Lay down yard before sending for termination jobs.
 Responsible for Material Receiving Inspection soon after the delivery, with the client.
 Inspection of the calibration of different types of transmitters and other instruments like control valves, pressure gauges etc.
 Inspection for Punch listing, Processing and Updating of QC documentation etc.
 Responsible for the various RFIs (Request for Inspection) and closing of all punches lists raised by the client.
 Co-ordinating with Planning and contractors to achieve the job done on expected time.
 Checking the daily progress report and forwarding it to management.
 Co-ordinating with all field supervisors and making plans to get job to done more efficiently.
 Co-ordinating with subcontractor for all type of construction jobs.
 Co-ordinating with sub-contractor, QC Department and client for day-to-day loop check activities.
 Organizing the instrument foreman / technician of team to rectify the punch list items and to do as built the drawings maintaining the proper records for the system turn over.
 Inspection for the installation of field mounted instruments, JBs, local panels and continuity check for instrument cables.
 Inspection for the installation of F&G Systems in the field such as Push Button, Horn & Beacon and Fire Detection Systems.
 Making progress monitoring reports and sending to client.
 Effectively co-ordinates with other related disciplines.
 Supervision of construction works like cable trays installation, cable laying, cable termination of JBs, cable glanding etc.
 Supervision of placement of all existing cables from the panels to the JBs and from the JBs to the field instruments.
 Well familiar with the level, flow, pressure and temperature measurement techniques and their methods.
 Installation of various field instruments like Transmitters, Control Valves, Shutdown Valves, Thermocouples, RTDs, GDFs, GDTs, MPSs etc.
 Preparation of different types of Technical Reports for the client after contacting the vendors and discussing with the project manager.
 Conversant with various symbols and standards.

مجال الشركة:
النفط والغاز
الدور الوظيفي:
مراقبة الجودة

Instrumentation QA/QC Inspector

فبراير 2009 - يوليو 2010

Daelim Saudi Arabia, Al- Jubail, KSA

الجبيل، المملكة العربية السعودية

فبراير 2009 - يوليو 2010

Project : Saudi Kayan - Phenolics Facilities

 Responsible for Calibration of all types of Transmitters, Control Valves, Gauges, switches etc.
 Ensuring that work is being carried out as per specification and approved drawings.
 Responsible for meggering and continuity check of the control cables from instruments to JBs and from JBs to Marshelling Panels.
 Inspection of all the connections as per the tagging of the instruments in the panel connection sheets from the panels to JBs and from JBs to the instruments.
 Co-ordinate with other discipline quality control inspectors for ensuring that all other discipline activities that require inspection within the Instrumentation construction program have been inspected and approved.
 Redlining the drawings, termination schedules, Instrument Loop Diagram (ILD), Datasheets etc., as per the modifications made on site.
 Prepare new Hook up drawings for any modifications and take the approval from the client.
 Co-ordinating with the commissioning and construction department for mechanical completion.
 Ensure that the loop folder submitted by the contractor contains all the relevant documents needed during the loop check.
 Arrange/attend meeting with contractors to discuss issues related to Engineering, Construction and Quality.
 Co-ordinate/follow up with the contractors to clear the A-punch items prior to commissioning of a system.

مجال الشركة:
الاستشارات الهندسية العامة
الدور الوظيفي:
مراقبة الجودة

Instrument Supervisor

سبتمبر 2008 - فبراير 2009

Hyundai, Al-Jubail, KSA

الجبيل، المملكة العربية السعودية

سبتمبر 2008 - فبراير 2009

Project : Marafiq Power and Water Project (Expansion)

 Supervision of construction works like cable trays installation, cable laying, cable termination of JBs, cable glanding etc.
 Supervision of placement of all existing cables from the panels to the JBs and from the JBs to the field instruments.
 Well familiar with the level, flow, pressure and temperature measurement techniques and their methods.
 Installation of various field instruments like Transmitters, Control Valves, Shutdown Valves, Thermocouples, RTDs, GDFs, GDTs, MPSs etc.
 Preparation of different types of Technical Reports for the client after contacting the vendors and discussing with the project manager.
 Conversant with various symbols and standards.

مجال الشركة:
النفط والغاز
الدور الوظيفي:
الهندسة

التعليم

University of Calicut

يناير 2007

يناير 2007

بكالوريوس، Applied Electronics & Instrumentation Engineering

الهند

المعدل التراكمي (نسبة مئوية): 65%

المعدل التراكمي (نسبة مئوية): 65%

FOUR Year Degree Course in Engineering. Branch:Applied Electronics & Instrumentation Engineering from a famous University in Kerala, India. PASSED the course with First Class.

Higher Secondary Examinations Board, Kerala

يناير 2002

يناير 2002

الثانوية العامة أو ما يعادلها، Science

الهند

المعدل التراكمي (نسبة مئوية): 65%

المعدل التراكمي (نسبة مئوية): 65%

Plus Two Course. Two Year Course after Matriculation. PASSED the course with First Class

Board of Public Examinations, Kerala

يناير 2000

يناير 2000

الثانوية العامة أو ما يعادلها، Science, Mathematics, English, Regional Language etc.

الهند

المعدل التراكمي (نسبة مئوية): 75%

المعدل التراكمي (نسبة مئوية): 75%

Matriculation PASSED with First Class

Skills

Control System Design
Expert
Control System Design
Expert
Engineering
Expert
Engineering
Expert
QC
Expert
QC
Expert
Instrumentation
Expert
Instrumentation
Expert
Commissioning
Expert
Commissioning
Expert
C
Beginner
C
Beginner
C++
Beginner
C++
Beginner
CALIBRATION
Expert
CALIBRATION
Expert
DOCUMENTATION
Beginner
DOCUMENTATION
Beginner
Instrument Trouble shooting
Expert
Instrument Trouble shooting
Expert
Loop Checking
Expert
Loop Checking
Expert
Instrument Installation
Expert
Instrument Installation
Expert
C++
Beginner
C++
Beginner
Control System Design
Expert
Control System Design
Expert
Engineering
Expert
Engineering
Expert
QC
Expert
QC
Expert
Instrumentation
Expert
Instrumentation
Expert
Commissioning
Expert
Commissioning
Expert

اللغات

العربية

متمرّس

الانجليزية

متمرّس

الهندية

متمرّس

الملايام

اللغة الأم

التدريب و الشهادات

الشهادات
Industrial Automation & PLC Programming.
Oct 2007

التدريب
FOUNDATION fieldbus with FIELDVUE Digital Valve Controllers
Saudifal Training Centre, Al-Jubail, Saudi Arabia
Feb 2016
Valve Maintenance with FIELDVUETM Digital Valve Controller
Saudifal Training Centre, Al-Jubail, Saudi Arabia
Jan 2016

الهوايات والاهتمامات

Reading