Muhammad Asif Adnan

 Testing & Commissioning of fire pumps like Jockey, Electric & Diesel pumps.
 Set and test the pumps sequences of operations (Jockey Electric Diesel).
 Set and test the pressure in pressure switch through sensing line for auto Pump operation cut IN/OFF.
 Set and test the pump RPM.
 To test the pump performance through flow meter reading by various GPM.
 To test the functionality of Alarm Check Valve with Water Alarm Gong and Pressure switch.
 Testing and Commissioning of fire suppression system FM200, NOVEC, Pre-Action System, Foam System.
 Testing and Commissioning (Functionality/Performance and Air Balancing) of FAHU, AHU, FCU.
 Testing and Commissiong (Stand-alone/Performance and Air Balancing) of Basement Air Condition and Mechanical Ventilation (ACMV) Fresh Air Fan, Exhaust Air Fan, Jet’s Fan.
 Testing and Commissioning (Performance & Air Balancing) of Staircase case pressurization Fans and Fireman’s Lift Lobby.
 Testing and Commissioning of DX Units.
 Basement Smoke test simulation test.
 Testing and Commissioning (Performance test and Water Balancing) of Chilled water Pump.
 Testing and Commissiong of Plate Heat Exchanger to check the Primary and Secondary line temperature and Pressure drop.
 Testing and Commissiong of inhibitor Dosing pump and tank, M-402 Non-Oxidizing Liquid Biocide & M 318 Corrosion inhibitor Sodium Nitrite with corrosion coupon racks and Pressurization Unit.
 Water Balancing and PICV setting of FCU, FAHU, AHU.
 To make a plain & Dynamic flushing.
 To add a chemical flushing after meeting the parameters (I.e. pH, Conductivity & Iron value).
 Addition of temporary passivation chemical.
 To make a dynamic after passivation.
 To make a backflushing of FCU, AHU & FAHU once iron value meets as per specification.
 To make a final flushing & removal of chemical.
 Addition of corrosion inhibitor & Biocide.
 To disposal of wastewater.

 To manage the fabrication groups and control the progress.
 To prepare material lists according to drawings and issuing the material from the warehouse.
 Spool marking on isometric drawings.
 Beveling (Single/Double), grinding, fit-up the joints according to approved procedure.
 Spools dimension verification before start welding & arranging the tools and consumable material.
 To monitor and control piping fabrication following drawings & specifications, to verify spool dimensions before & after welding.
 To Identify the spool with weld no’s, spool no’s as per drawings.
 To arrange the fabrication according to the materials group (CS, SS, Duplex, and Alloy Steel).
 To monitor the fabrication, erection activities and meet the schedule.
 To control welding as per approved welding procedures & quality control inspection plan.
 To complete the lines, installation of valves and connect with equipment.
 Prepare the punch list pre-test & post-test and verify the rectifications.
 Material traceability by color-coding (fitting, pipe & consumable material).
 Preparation for hydro testing, leak testing & pneumatic testing U/G & A/G piping.

Project Nishat Emporium Mall
Site Johar Town Lahore
Client Nishat Group
Contractor Timeline Consultants
Duties and Responsibilities
 Ericson of Four Boilers and Its Utilities including Piping.
 Installation Inspections MIR & RFWITs supervision & witness at the site.
 Ensure the Mechanical work has Complied with specifications standards according to drawings.
 Coordinates with the client representatives on matters involving quality assurance and control activities.
 Quantification and inspection Contractors Bill according to with as per build Drawings.
 Compiling measurements, handing overs, RFWIT’s & MIR with their supportive documents, Quantification for
IPC & IPN.
 Responsible for creating & review the Plot Plan for rotary & static Equipment Layout.
 Review the Piping Layout, isometrics & MTO, 3D Modeling, Nozzle orientation, Platform orientation, Section
& Details, Piping Stress and Piping Support, Isometrics & MTO.
 Piping material, fitting, valves BOQ preparation.
 Check and review vendor documents.
 Drafting Piping Material specifications, datasheets, and drawings.
 Preparing and issuing Piping Material requisitions for bid and procurement.
 Preparing Technical Bid Comparison & evaluation.
 Following the piping material requisition package though the life of the project up to close of the purchase order.
 Preparing piping material calculations such as wall thickness, area reinforcement as per ASME B 31.3.
 Preparing and planning piping material work on a project.
 Interacting with vendors, site, fabrication yard, and the client to sort out queries related to piping materials.
 Mechanical completion, pre-commissioning, testing, handed over the project.

Project Jopetwill Company
Site P-349 (Yard)
Client Jopetwill Company
Contractor CCTC
2nd
Project EPC WORKS FOR ZK FIELD
Site P-343 (Yard)
Client ADMA
Contractor CCTC
3rd Project UAD SURFACE FACILITIES FOR ESP, PH-I
Site P-331 ZADCO (OFFSHORE)
Client ADMA
Sub-Contractors CCTC
4th Project SEP-550 JACK UP BARGE
Site P-333 NPCC
Client NPCC & ABS
Sub-Contractors CCTC
Duties and Responsibilities
 Continuous use of Material Specifications for finalizing Line Routing & Layout.
 Supervision of fabrication, installation & execution work activates of Steel Structure.
 Supervision of fabrication and erection of piping for chilled water, seawater and firefighting system.
 Supervision of layout, marking, cutting, fabrication and erection activities for plate and structural work.
 Responsible to manage the manpower and machinery properly.
 To monitor and control piping fabrication following drawings & specifications, to verify spool dimensions before
& after welding.
 Coordinating with Engineering and Construction and liaise with the Client on detail engineering requirements.
 Responsible for Piping erection and pipe support installation following schedule, Procedures, Specifications,
Priorities, and Availability of Construction Drawings.
 Handling all piping technical queries and investigating all field pipe work-related problems, including the
drawing of field sketches when necessary.
 Spools dimension verification before start welding.
 Raising MTO(s) for all materials required to additional materials for hydro tests etc.
 Responsible for welding activities such as SMAW, GTAW (TIG), SAW Welding Processes.
 Coordination for the NDT of Welding Joint (RT, DPT, and MPI) & keep records of the Test Report.
 Responsible for material issuance, handing & consumables.
 Responsible to clear the punch list raised by the client.
 Responsible to arrange the hydro testing for all piping systems.
 Enforce HSE requirements (PPE, PTW) and attend the weekly safety meeting.
 Reporting the daily progress to the construction manager.

Project Improvement of Water Supply System in Abbottabad
Site Raw water Transmission Main (RWTM).
Consultant NSC & JAPAN TECHNO (JAT)
Client PHED (KPK)
Sub-Contractors Zoom Engineers, IECS & PETROCON.
Duties and Responsibilities
 Supervision of installation & execution work of steel Pipeline of Treated Water Transmission Main 27KM.
 Responsible for WPS, WQT & PQR according to standards.
 Responsible for fabrication & installation of valve and fittings.
 Inspection of Fit-up, Welding of joint & Tie in Joints.
 Responsible for the NDT of Welding Joint (DPT, UT) & keep records of the Test Report.
 Inspection of Installation of Heat Shrink Sleeve & Cold Wrapping Tape.
 Inspection of External Coating by Holiday Test with D.C Pinhole detector.
 Responsible for the modification as per site & informs to Consultant.
 Planning of Weekly & monthly Schedule to achieve the Installation of Steel Pipe & Fittings.
 To attend the Weekly Meeting with Japanese & Managers of Sub-Contractor.
Worked with: Tobishima Corporation Japan

Project Improvement of Water Supply System in Faisalabad
Site Transmission Main, CM, JBC & Terminal Reservoir
Consultant JAPAN TECHNO (JAT)
Client WASA (Faisalabad)
Sub-Contractors EKL, PETROCON & KSB
Duties and Responsibilities
 Supervision of installation & execution work of steel Pipeline (DN-1000) of Transmission Main 26KM &
Terminal Reservoir.
 Responsible for WPS, WQT & PQR according to standards.
 Responsible for fabrication & installation of Header DN-1600 for TR.
 Responsible for the fabrication of elbows, saddle, dummy Steel Pipe (04” to 64”) in the Fabrication shop.
 Inspection of Fit-up, Welding of joint & Tie in Joints.
 Responsible for the NDT of Welding Joint (DPT, RT, and UT) & keep records of the Test Report.
 Inspection of Installation of Heat Shrink Sleeve & Cold Wrapping Tape.
 Inspection of External & Internal Holiday Test with D.C Pinhole detector.
 Supervise to Sub-Contractor & their progress work as per schedule.
 Responsible for the modification as per site & informs to Consultant.
 Responsible to submit RFI to the consultant for Inspection.
 To prepare a test pack for hydro testing of the pipeline.
 To Prepare Weekly & monthly Schedule to achieve the Installation of Steel Pipe & Fittings.
 Responsible for receiving of Steel Pipe & Fittings (DN-150 ~DN-1600) from Crescent Steel Mill & Kubota.
 To attend the Weekly Meeting with Japanese & Managers of Sub-Contractor.