Microwave Planning and Design Engineer
Huawei RSC PAKISTAN ( AISACELL IRAQ & ZAIN IRAQ)
Total years of experience :11 years, 4 Months
Responsible to Planning and Design network for ZAIN IRAQ& AISACELL IRAQ.
•Responsible to Planning and Design MW links as per planned HLD and BOQ.
•Responsible to Planning and Design MW link material and maintain BOQ.
•Responsible for PRPO/SDBOQ to Iriver 2.0 and MBB.
•Responsible to prepare WO for customer to issue PO to Subcon.
Responsible to Planning and Design network for EAST MOBILY Etisalat Saudi Arabia.
•Responsible to Planning and Design BH for 5G EAST MOBILY Etisalat Saudi Arabia.
•Responsible to Planning and Design STAR topology for FON sites for RTN.
•Responsible to Planning and Design SOR requirement from Transport.
•Responsible to Planning and Design 10G ports for full network.
•Responsible to IP planning and SOR design.
•Responsible to design SOR and to configure on PE and CE from customer.
•Responsible to perform subnetting of provide subnet from customer.
•Responsible to assign subnet to each FON or Fiber node for services IP and Vlans.
•Responsible to Planning and Design the material requirement to implement full network on 10G ports.
•Responsible to prepare full network planning data and requirement for 5G and 10G ports for full network to prepare BOQfor material.
•Configuration of material for links on Huawei systems so that WH release material according to require design material.
•Check and confirm SDN material and price for invoicing.
•Responsible to provide proper outdoor and indoor design so that team can implement properly with approved design.
•Preparing CITC Data for full network so that customer can take CITC approval and license.
•Preparing full network Database.
•Plan CIR capacity requirement for BH and Transport for full network.
•Plan EBAND (RTN380AX) and SDB links (1+0 and 1+0 XPIC) for 5G sites to accommodate 5G sites.
•PLAN KBAND(XMC-5D, XMC3) links ( 2+0 XPIC, 1+1SD, 1+1SD XPIC, 2+0 SD XPIC, 4+0, 1+0 SD, 2+0 SD, 4+0 SD) for Aggregation and 5G site where EBAND distance criteria exceed.
•Providing training to all suppliers teams for implementation of new MW Links.
•Responsible for Links readiness and link acceptance from Customer so that PMO team can invoice the link from customer.
•Responsible for all access network related projects nationwide as nationwide team leader.
•Managing a team of team leaders for projects like network rollout, swap, network expansions, site relocations, cost optimization/OPEX reduction, etc.
•Internal and external stakeholder management.
•Budget management related to MW for projects that are part ofthe program.
•Delivery of all projects in the program aligned with company objectives.
•Regular reporting including forecasting to local management and group HQ for all projects in the program.
•Involved in the contract management during pre-sales activities. Links Design and implementation RTN510 safe city project
•Responsible for Planning and design for safe city camera project RTN510.
•Fully working on customer requirement where required safe city camera and plan links accordingly.
•Taking exact coordinate where customer plan to implement safe city project.
•Import all coordinate to Eplanner Planning tool and design sectors PTMP, Camera RT, AP PTP.
•Scanning frequency test and providing actual available frequency in the field.
•Alignment of PTP and PTMP links after scan actual frequency.
•Planning and design IP plan and Vlan plan for links PTM PTMP visibility on Esight.
•Supporting other issue which face in field during installation and integration.
Implementation of new STC sites.
•Implement MW link for new site.
•Alignment and Integration of new MW link and RBS6102 GSM site.
•Coordination with Vendor (Ericsson) and Operator (STC).
•Fulfilling the customer KPI.
•Implementation of project with high quality and safety.
•Managing and solving problem for team.
•Preparing PAT documents for site acceptance.
•Submitting accepted PAT documents to Ericson.
•Following with customer for PO and payment release.
Check and control on PO.
•Uploading DOC's on IPM to Release Payments.
•Check and balance for Payment release on IPM.
•Taking Updates from Customer for PO.
•Check and balance on Safety and quality of Work.
•Conducting and monitoring site survey.
•Arranging material from Vendor WH to Sites and required installation materials.
•Provide recommendation to customer need for sites.
•Assigning task, controlling resources and coordination with customer to complete the task.
•Installation of FDD, TDD, 3G (2100 & U900), 2G.
•Installation of Alcatel Microwave (DIA 0.6 to 1.8, Configuration 4+4).
•Configuration for MSS1, MSS4, MSS8.
•Performing XPD.
•Taking care for civil requirement for site (mounts, Busbar, etc).
•Taking care for Power requirement for site (Fuses, Circuit breaker, etc).
•Fulfilling the customer KPI.
•Implementation of project with high quality and safety.
•Managing and solving problem for teams.
Implementation of new STC sites.
•Implement MW link for new site.
•Alignment and Integration of new MW link and RBS6102 GSM site.
•Coordination with Vendor (Ericsson) and Operator (STC).
•Fulfilling the customer KPI.
•Implementation of project with high quality and safety.
•Managing and solving problem for team.
Implementing IBS site for ZAIN inside the whole campus of KAUST (King Abdullah University of Science and Technology)
•Making sure to implement DAS as per provided design.
•Working on design and implementing the design.
•Monitoring the Quality of work and HSE (Health and Safety).
•Monitoring teams and work.
•Performing and monitoring all work related to IBS (civil, electrical, etc).
•Working on Safety rules and following Safety rules strictly to implement DAS smoothly.
•Preparing work order for each building for Teams so that team can perform their activity without any hurdles.
Monitoring teams for Quality of work and health safety.
•Meeting with Vendor (Nokia) for new scope.
•Managing and coordination with MS, Vendor and Operator.
•Managing and coordination for material required for activity.
•Full filling the needs of teams, Vendor and for assigned sites.
•Preparing PAT folder, WAC and other documentation work need by Vendor.
•Complete tracker for sites and PO.
•Complete installation of New Nokia Site for ZAIN.
•Configuration and commissioning of Delta Rectifier Alarms.
•Configuration and commissioning of 2G, 3G and LTE including all Alarms.
•Checking and Clearing the Alarm like VSWR Alarm, RSSI value.
•Making the site ON AIR with the coordination of NOKIA.
•Eltek Rectifier configuring all indoor and outdoor Alarm.
•Punching all alarm in crown and in Eltek Rectifier.
•Creating PAT sheet and BOQ Sheet.
•Handover the site to the maintenance by completing PAT.
•Adding new antenna of 3G, LTE and CA.
•Complete installation of 3G, LTE and CA.
•Configuration and commissioning the 3G, LTE and CA.
•Making the site ON AIR with the coordination of NOKIA.
•Preparing PAT sheet and BOQ Sheet.
•Handover the site to the maintenance by completing PAT.
•Clearing swap of Antenna.
Resident Engineer Behalf of CYBERNET
•Working as a NOC Engineer at Standard Chartered Bank Head Office.
•Monitoring the whole network of BANK.
•Configuration of CISCO Routers & Switches.
•Troubleshooting the VENDOR links.
•Troubleshooting the branch access to the Head Office.
•Sniffing the IP which utilizes the maximum bandwidth and then shutting down the port of switch.
•Providing technical support to branches, head office and disaster recovery.
•Coordination with Vendors on email or call.
Providing a technical support on call.
•Providing support and try to resolve the clients query regarding to Fiber optics,
•Radio, DSL, Domain, Email ID's, VSAT.
•Access client router and verified the internet network bandwidth, trace result and
•Blocking of Public IP.
•To configure router on client request and requirements.
•Taking a TeamViewer to diagnose the problem and bandwidth verification.
•On email coordination with clients and vendors.
TelenorProject
•Complete Installation of new equipment of NEC Microwave Links.
•Complete Installation and configuration of Ipaso (1000, 400, 200).
•Installation of Antenna of Dia (0.3m, 0.6m, 0.9m, 1.2m, 1.8m).
•Link alignment of given RSL. Major Microwave link
•XPD (cross polarization) Microwave link of antenna dia 1.8m (main) and 1.2m (diversity)
•With waveguide and a path length of 12 KM from Tando jam to Hydrabad.
•XPIC (2+2) microwave links with 1.2 (main) and 1.2 (diversity) with waveguide.
•MobilinkPROJECT Mobilink(WIMAX)
•Installation and dismantlement ofAntenna's.
•Complete installation of wimax.
•Commissioning of 1+0 and 1+1 Antenna's.
•Trouble shooting and Error detection oftransmission. MobilinkSiteSurvey
•Complete survey of site
•RAN, Civil, Transmission Survey Alcatel
•Swap of Mobilink
•Dismantlement of old 2.5G Motorola Equipment.
•Installation of new Equipment ofAlcatel.
•Commissioning of BTS ofAlcatel.
•Trouble shooting and Error detecting of all Equipment.
•To bring the site Online to the OMC.
URL removed due to policy violation. Please contact support for further information.