Facility manager
Techbridge Recourse Pvt LTD
Total years of experience :13 years, 7 Months
Administering the overall functioning of power generation, HVAC & technical services. Monitoring adherence to quality standards for effective & quick rendering of facilities and ensuring compliance with statutory acts as well as rules & regulations. Facilitating anchoring on-site activities to ensure completion within the defined
parameters and effective resource utilization to maximize the output. To ward smoothly run daily basis operation like 66KV substation, T/F 66/11 KV, chiller condenser and evaporation set temperature, cooling tower operation, WTP (Domestic, RO, Softener) operation. Supervising infrastructure development entailing daily administration, maintenance of material at favourable terms. Performing negotiation with vendors; managing contracts for obtaining timely procurement of materials at favourable terms. To prepare and maintain compliance report on daily, monthly, quartile, & yearly basis. we maintain on daily basis Transformer 6.5MVA x 02 (66/11 KV), 2000KVA nos 03, 1600KVA nos-04. Services of DG, VCB, ACB, AC, Chiller, WTP & Tank cleaning. Services of lifts every month and then get it checked quarterly & yearly by third party. To supervise shift Engineers, Technicians work on allocated area & floors and to be ensuring that work is carried out to the standard as required by the client & as per scope of work. Operation& maintain of HVAC, AHU, TFA, cooling tower, 300TRx 3Nos, temperature, Log bookon daily basis. working out various requirements with respect to utilities & manpower monitoring overall operations for ensuring timely completion of task. Check job order & floor inspection round report work are completed with the time line. To prepare monthly base tracker details of total electricity that we received, used and lost, same is done for DG. To send clients electricity and dg reading in account on monthly basis for bill generation. To check and order material requirements. To solve clients basis Problems in time. Any minor & major problems discuss with team and escalate to client & office. Issuing work permit on daily basis according to work. Operation and maintain compressor 717CFM-2Nos(110KW), 569CFM 2Nos(90KW), 247CFM-2Nos(35KW).
To smoothly run daily basis operation like departments electricity load balancing, chiller condenser and evaporation set temperature, cooling tower operation, WTP (MGF, ACF, Softener) operation also STP. Check the all critical equipments parameters and noted. To prepare a rooster and handle the team according to the shift. To prepare and maintain compliance report on daily, monthly, quartile, & yearly basis. Following with AMC vendor and prepare review weekly report. To make PPM of pumps and panels on monthly basis. Services of DG, VCB, ACB, AC, Chiller, WTP & Tank cleaning. Services of lifts every month and then get it checked quarterly by third party. To supervise shift Engineers, Technicians work on allocated area & floors and to be ensuring that work is carried out to the standard as required by the client & as per scope of work. To collect and maintain the database of a new client and get their meter installed and handover to them. To check third party, DG stack, Drinking water samples, noise monitoring and ambient air monitoring. Check all records are maintained on regular basis. To check plumbing maintenance and attend daily basis complaints. To check Diesel and maintain registers on daily basis. Check job order & floor inspection round report work are completed with the time line. To prepare monthly base tracker details of total electricity that we received, used and lost, same is done for DG. To handle CCTV controls room. To note down reading on daily basis.
To send clients electricity and dg reading in account on monthly basis for bill generation. To check and order material requirements. To solve clients basis Problems in time. Any minor & major problems discuss with team and escalate to client & office. Issuing work permits and ensure the vendor follow the safety procedures while on the site. Supervisor all employees in technical control department, including assigning tasks, approving schedules, and ensuring compliance with timelines
Going for walk around of the facility every day. Check the all critical equipments parameters and noted. Review the daily report. Following with AMC vendor and prepare review weekly report. To organize collection of data (Fuel, Power). Fir work (Smoke, Sound, heat detector, MCP, Indicator, Hooter FHC, Jockey Pump, Diesel Pump) check daily base. To supervise shift Engineers, Technicians work on allocated area & floors and to be ensuring that work is carried out to the standard as required by the client & as per scope of work. Conduct briefings on a regular basis. Arrange training program and attend with team as planned. Check all records are maintained on regular basis. Maintenance LT panels, DG panel, Common Panel, Lifts Panel ACB, VCB, Transformer, 11kv line. Following the payments for vendor and client. Check job order & floor inspection round report work are completed with the time line. Any minor & major problems discuss with team and escalate to client & office. Housekeeping and security duty shift rotating. Backup bill preparing. Issuing work permits and ensure the vendor follow the safety procedures while on the site
BOQ (Work According to BOQ). Erection of 11KV Line, Erection of transformer, Installation of HT Panel, CT, PT and Isolator. Lighting Wiring, Power wiring single phase 3phase. Internet outlet, Telephone outlet, intercom outlet point installation. CCTV, Fire work, Audio Video work according to drawing. HVAC, Sewage Treatment Plant, Commissioning of Plumbing Systems, Water Distribution Networks, Pumps, Plumbing Pipe Works in Trenches. Emergency Point(UPS), Distribution Box, Elevator, DG installation work. Earthing point Installation. Prepared electrical-related scope documents, specifications, schedules and Requests for Proposal. Check Contractor material check Quality according to tender. According to as per site Prepared Estimate cost Conduit, wire for site. According to drawing to give Requirements for materials. UPS & LT Panels Cable Tray, Installation. Preparing the sub-contractor, client bill. All installation according CPWD specification. Produced quality electrical engineering plans, ensuring compliance with department, project, company,
utility, regional electrical entity and industry requirements and standards were met
Prepared initial design and drawings using AutoCAD electrical wiring & CCTV. Gave practical and theoretically Knowledge about electrical. Imparted them knowledge about the following skills. Single phase & 3phase WIRING. MCB& types, MCCB, RCB, RCCB& types. CCTV, change over. Bus bar, distribution board types. Earthing & types. Panel, 11 kv line, stay & types, pole & types. Transformer and working. Cables, wires, conduit, pvc pipe. Ms pipe, modules box & types, all installation. Calculation wire, load, power factor I also teach them regarding Explaining the drawings. Sourcing placement Training is important part. Additional-Handled Housekeeping, Security, PA system, Fire System, infra work.
BOQ (Work According to BOQ), Prepare initial design and drawings using AutoCAD electrical. Lighting Wiring, Power wiring single phase 3phase. Internet outlet, Telephone outlet, intercom outlet point installation. CCTV, Fire work, Audio Video work according to drawing. Served as an interface between the Electrical Engineering team and internal clients to facilitate interdepartmental relations. Emergency Point, Distribution Box, DG installation work. Cable termination and equipment testing. Rectify problems found preliminary testing. Conduct final test of all the system prior to approval and acceptance of the client. Acted as a subject matter expert regarding some electrical engineering activities ensuring that project needs and objectives were met. Check Contractor material check Quality according to tender. Prepared electrical-related scope documents, specifications, schedules and Requests for Proposal. According to drawing to give Requirements for materials. UPS & LT Panels Cable Tray, Installation. Produced quality electrical engineering plans, ensuring compliance with department, project, company, utility, regional electrical entity and industry requirements and standards were met.
BOQ (Work According to BOQ), Prepare initial design and drawings using
AutoCAD electrical. Lighting Wiring, Power wiring single phase 3phase. Internet outlet, Telephone outlet, intercom outlet point installation. CCTV, Fire work, Audio Video work according to drawing. Served as an interface between the Electrical Engineering team and internal clients to facilitate interdepartmental relations. Emergency Point, Distribution Box, DG installation work. Cable termination and equipment testing. Rectify problems found preliminary testing. Conduct final test of all the system prior to approval and acceptance of the client. Acted as a subject matter expert regarding some electrical engineering activities ensuring that project needs and objectives were met. Check Contractor material check Quality according to tender. Prepared electrical-related scope documents, specifications, schedules and Requests for Proposal. According to drawing to give Requirements for materials. UPS & LT Panels Cable Tray, Installation. Produced quality electrical engineering plans, ensuring compliance with department, project, company, utility, regional electrical entity and industry requirements and standards were met. All installation according CPWD specification
Supervised a team of multinational company electrical in performing various types of job as per Company scope of work. Job includes ensuring the safety of all subordinates layout of various types of conduit (LSF, and PVC conduit) both overhead and underground installation of cable trays of different sizes and height. Control panel mounting installation and cable Layout prior to termination. wiring and cable termination according to drawing which include Building Management System (BMS), Room control, Electrical Lighting, Electrical Small Power, Fire, Emergency, Telecommunication, Audio Video wiring. Cable Termination and equipment testing. Rectify problems found during preliminary testing. Conduct final test of all the system prior to approval and acceptance of the client, custom. To give the precaution for safety to labor of contractor
Inspection Distribution Transformers. Field Verification of infrastructure created in the villages and Substations under RGGVY scheme of Ministry of Power Government of India. Inspection of Transmission & Distribution lines. Substations: - Inspection substation like CT, PT, ISOLATORE, EARTHING, CABLES, TRANSFORMER, FEDDER, IN COMING OUT GOING LINE, CONTROLL ROOM. Inspection of Transmission & Distribution lines. Inspection 11 kv line LT line and transformer 10 kva, 16kva, 25 kva., pole,
Earthling, Pin insulator G.O switch. Lighting Arrestor, GSL Wire, Lt PVC Cable, ACSR Conductor, Meter, Meter Box Earthing.
Survey Work of 11kv lines. Erection of 11 kV lines. Erection of LT lines. Proposed T/F 25 KVA. Maintenance & Repair of all appliance at site. Handing over taken over. Data prepared and New Transformer Fess Deposit in PSPCL Patiala Estimate material As per site. Erection 11 kv Lt Cables.
Fault Remove Ht & Lt Line,
Installed New Meter.
Draw a Drawing for New Line .
Preparation for New Material Issue.
Junior engineer Apprentices.
Installation BPL Energy meter.
installation of RCC pole for 11kv & LT line.
• Survey work 11kv line..
• Erection of 11 kV lines& Lt line.
• BPL Meter installed metering reading & billing.
• Line Shifting Under Ground Cable LT & HT NHAI Amritsar To Pathankot.
• Cables XLPE HT Line and PVC LT Cables.
• Handing over taken over.
• Data prepared and New Transformer Fess Deposit in PSPCL Patiala
• Estimate material As per site.
• preparation of energy bills, calculations of rebate.
Electrical engineering