Nazeeruddin Ahmed محمد, E&I Project Engineer

Nazeeruddin Ahmed محمد

E&I Project Engineer

Lamprell Energy Limited

البلد
الإمارات العربية المتحدة - أبو ظبي
التعليم
ماجستير, Applied Instrumentation and Control Engineering
الخبرات
15 years, 9 أشهر

مشاركة سيرتي الذاتية

حظر المستخدم


الخبرة العملية

مجموع سنوات الخبرة :15 years, 9 أشهر

E&I Project Engineer في Lamprell Energy Limited
  • الإمارات العربية المتحدة - الشارقة
  • أشغل هذه الوظيفة منذ يونيو 2013

 Ensure all safety requirements are complied with Lamprell HSE and the work is carried out in line with the Contract Terms.
 Calculate the cables Sizing
 Liaise with the Project Manager / Engineering for update on status of AFC drawings, shop drawings, material receipt and construction schedule.
 Supervise all E & I construction activities at site including interfaces with other disciplines and Subcontractor works. Ensure necessary resources are available on site
 Concession Requests through PMT, Engineering / QAQC / and Client.
 Identify any changes to the Contractual Scope of Work & Specifications which have schedule and cost impacts on Project
 Closely monitor all revised Drawings and Specifications and accordingly request for necessary Job Instructions / Variation Order Packages.
 Identify any major constraints affecting construction progress and bring them to the immediate attention of the Project Manager / E&I Manager.
 Resolve Engineering, Inspection Queries during the construction phase
 Ensure availability of manpower resources, construction aids, equipment, material, tools and continuation of construction activities at site.
 Maintain a manpower log and control manpower allocation for efficient deployment.
 Maintain a daily Progress record and material utilization record and report potential shortages to the Project Manager on regular basis.
 Maintain peer level contacts with Clients and Subcontractors for the resolution of site queries, deviations, concession requests, etc.
 Ensure proper preservation of the equipment in accordance with the approved project preservation procedures and Vendors recommendations.
 Maintain marked-up As-Built Drawings on a daily basis. Participate in constructability review meetings with Engineering, PMT, Yard, Subcontractor and Client.
 Review the Project Planning Package to establish the sequence, During major electrical activity include Engine start-up, Jacking up the Vessel, Load out.
 Responsible for installation of Electrical and Instrumentation works of Offshore Jack up Rigs, Land Rigs & Vessels .
 Conduct loop checking of MCC Motor Control Centre, Lighting Distribution Boards, Distributive and Control System, Power and Control System, Wellhead Safety Cabinet, ESD / Fire and Gas System, Pre-comm / Commissioning of offshore Jack UP rigs
 Attend the Daily Morning meeting with Lamprell Personnel, weekly and monthly project progress meetings with contractors and subcontractors from Electrical perspective of the Projects
Major Project Handle at Lamprell :

Client: Sea jack Hydra
Responsibilities include but limited to installation of Below listed Electrical Equipment

 Generator, 690v/400v Switchgear, Transformers, MCC, Bus Ducts.
 UPS, Battery Chargers, Lighting, PDB’s
 Navaid CP, Instrument Relays and Control Panels,
 Fire/gas detection systems and control equipment (detectors, alarms, cabinets, panels).
 Dynamic Position Control System
 E&I Cables including all accessories such as glands, fixing and identification tagging, ferrule .
 Junction boxes/marshalling cabinets installation.
 Instrument Tubing, piping, valves and fittings. Support frames, mounting posts
 Site routed cable racks and supporting arrangements


Client : National Drilling Company 3&4 (Qarnain & Marawa )

Responsibilities include but limited to installation of Below listed Electrical Equipment

 CAT 2400 KW Generator, 690v/400v Switchgear, Transformers 690/400/220/110, MCC, Bus Ducts.
 UPS, Battery Chargers, Lighting, PDB’s
 Navaid CP, Instrument Relays and Control Panels,
 Fire/gas detection systems and control equipment (detectors, alarms, cabinets, panels).
 Drilling Equipment Package installation( Draw work, Top Drive, Mud Pumps, PRS, Crane ).
 E&I Cables including all accessories such as glands, fixing and identification tagging.
 s

Project/Operations Engineer في Rowan Drilling Aberdeen UK
  • المملكة المتحدة
  • يوليو 2010 إلى يناير 2013

Worked at Rowan Drilling Aberdeen UK as Project/Operations Engineer offshore
July 2010- Nov 2012
Duties and responsibilities: • Preparing Design basis, technical scope of work for concept studies ensuring
company standards are included in scope of work
• Perform technical studies compile Functional Design Specifications reports in view of improving performance or upgrading the facilities
• Carryout Project and operations engineering activities at various stage of the project
• Preparations of technical queries, prepare response to the bidder queries, prepare technical bid recommendations for placement of order
• Assist with the development of specification and selection of Drilling
equipment and provide performance review of selected equipment
• Participate design review and evaluations to ensure equipment to be
manufactured is fit for purpose for offshore and operational optimizations
• Prepare and review of instruments deliverables like design basis, specifications, data sheet, calculations, instrument layouts, hook up drawings, loop diagram, logic diagram interconnections of instruments and
equipments layouts,
• Participate HSE Bi weekly / monthly meeting assist in engineering, operations and technical recommendations to ensure systems will be safely
operable in the field
• Managed the engineering and commissioning the drilling unit, to deliver according to the plans and procedures in the Project Execution Plan.
• Co-ordinate and Supervise all day-to-day activities relative to the system
design reviews
• Ensure that the systems are designed to satisfy the performance and functional design specifications of the unit as well as the requirements of the
drilling industry standard
• To ensure that the rig systems will be safely operable in the field, including
overall engineering support during the commissioning activities in the shipyard, during sea trials and acceptance tests.

Electrical Electrical في Anewa Engineering
  • الهند - مومباي
  • أغسطس 2006 إلى سبتمبر 2008

Client: Jindal ONGC, HP

 Involved in preparing the layouts of lighting, Power, Telecommunication, Public addressing system, Fire alarm system
 Preparing SLD as per the project specification, Preparing BOQ and Involved in cost estimation of the item.
 Preparing Calculation sheets for lighting, cable tray and cable calculations for various building to execute the project according to the client requirement
 Gathers information for modifications in the existing installations to make it more safe and convenient for the clients.
 Coordinates with the vendors and communicates about the material and instrument requirements.
 Responsible to performs quality checks on the electrical instruments manufactured within the organization or FAT by the vendors.
 Performs periodic tests for electrical installations at various sites and recommends changes if the existing installations are unsafe to use.
 Supervises the staff activities and directs them in adapting the best practices to deliver optimum results.
 Responsible looks after the complaints lodged by the clients and identifies the root cause of the problem.

الخلفية التعليمية

ماجستير, Applied Instrumentation and Control Engineering
  • في Glasgow Caledonian University
  • مايو 2010

• Master of Science in Applied Instrumentation and Control Engineering Glasgow Caledonian University, Glasgow United Kingdom2010

بكالوريوس, Electrical and Electronics Engineering
  • في Jawahar lal tehcnological University
  • مايو 2006

• This project was carried out to control speed of an AC induction motor used on oil and gas platforms with the aid of microcontroller. Microcontroller was programmed using C- language and developed a prototype. Major advantage of this project was speed controlling was done efficiently and quicker than the available conventional methods.

Specialties & Skills

Design Solutions
Offshore Project Management
Offshore Operations
ACROBAT
CATERPILLAR
DESIGN REVIEW
ENGINEER
MAINTENANCE
OPERATIONS
TESTING

اللغات

الانجليزية
متمرّس

العضويات

Institution of Engineering and technology, Glasgow, UK
  • Member
Association of Electrical Engineers, JNTU, Hyderabad, India
  • Member

التدريب و الشهادات

OPTIO (الشهادة)
تاريخ الدورة:
December 2011
صالحة لغاية:
December 2011