Pindra Suyatno

Overall duties description:
• Prepare Tender Proposal and Documents
• Fabrication Project management & Engineering
• Planning, Manage daily fabrication activity
• Review shop drawing, feedback and follow-up if any unclear shop drawing with client engineering team
• Plan and manage manpower
• Follow-up for material shortage
• Assign QC for RFI preparation
• Attend daily progress meeting with client
• Prepare Invoice

Overall duties description:
• Sourcing Material required/inquiry from client
e.g. Steel plate, Pipes & Fittings, Valves, etc to overseas vendors & manufacturers
• Send inquiry to vendors
• Review specs required from clients
• Review specs offered from vendor
• Prepare Quotation, PO and Invoice

March 9, 2016-Present
ALTON Internasional (S) Pte Ltd
Industry : Oil & Gas EPC for System Engineering (Package)
Designation : Project Engineer
Project :
- PHE WMO Project - Produced Water Treatment
- PHE WMO Project - N2 & CO2 Snuffing System
Client: PT. Gunanusa Utama Fabricators
End-User: Pertamina Hulu Energy

ALTON Internasional (S) Pte Ltd is a Singapore Company which based in Singapore that applies ISO 9001:2000 company provides engineering consultancy, services, project management and supply of custom built system equipment for the Oil & Gas, Petrochemical, Refinery, Power Generation and Marine Industries.
Overall duties description:
• Project management & Engineering
• To prepare master list, plan, make schedule, & cost control of the handled project
• To lead project team (designer, engineer, contractor, supplier, site supervisor) & to ensure it is on schedule.
• To liaise with client as focal point on technical & commercial issues.
• To monitor engineering, procurement, fabrication & testing status.
• To prepare equipment & instrument datasheet and submit to client
• To check engineering drawing (Piping & Instrument Diagram (P&ID), General Arrangement, detail drawing) & other documents and submit to client
• To sourcing & procure (make inquiry & P.O, review quotation, negotiate with supplier, contractor, forwarder) for equipments, instruments, raw material, fittings, valves etc., according to requirement from client.
• Site supervision during fabrication •Monitor Fabrication at Subcontractor site
• Verify and confirm the availability of drawings and materials, to plan the efficient execution of the works performed by subcontractors or by assigned direct hiring personnel
• Assist subcontractors or personnel for the correct interpretation of the drawings, providing support in the solution of technical problems
• Supervise the execution of mechanical, electrical & instrument works, checking that machineries/tools are properly used and maintained •Supervise the execution of mechanical, electrical & instrument completion activities, making sure that all punch list items in scope are closed
• Verify that works are correctly carried out in accordance with the project specifications, highlighting any engineering problems encountered in the field
• Organize working area based on assigned activities to improve HSE and overall efficiency

October 7, 2013-January 29, 2016
PT. Meindo Elang Indah
Industry : Oil & Gas EPC Contractor
Designation : Project Engineer
Project : South Mahakam Phase 3 (TOTAL)

PT. Meindo Elang Indah, is a Indonesian EPC Contractor which based in Jakarta Indonesia that applies ISO 9001:2008 company provides engineering consultancy, services, project management and supply of custom built system equipment for the Oil & Gas, Refinery, and Marine Industries.

Responsible:
• Reports to Project Manager
• Principal member of the Project Engineering Manager’s engineering staff and, assist the Project Engineering Manager in the management functions of the Project.
• Assist project Engineering Manager to supervise, expedite engineering works,
• Assist Procurement team in technical aspects in issuing purchase order.
• Coordinate technical meeting between Client, Contractor and vendor for all engineering and technicl issue and give advance approval to vendor in order to maintain package delivery
• Originate Technical Query/Deviation proposal for engineering/technical issue.
• Supervise expeditor team and document control in monitoring vendor documents and vendor works progress to maintain package delivery on scheduled.
• Development, execution, supervision, and coordination of all technical aspects of the work.
• Ensure that the customer criteria and scope of work are being met by all engineering disciplines.
• Functionally responsible to the CONTRACTOR Representative.
• Responsible on interfacing and coordination inter engineering discipline, Procurement, Project management and interfacing to Client and vendor
• Monitoring Vendor Equipment Package on engineering/technical aspect
Knowledgeable on all equipment package that sub-contracted to Vendor, Mechanical, Electrical and Instrument package
• Witness FAT & SAT for vendor packages
• Attend all technical meetings and workshop, HAZOP, TRA, SCE
• Interfacing between Construction team, Pre-commissioning team and Engineering team
• Sourcing equipments and tools required for Pre-commissioning and Hook-up operation
• Interfacing between Pre-commissioning team and equipment vendors
• Assigned to assist E&I Construction, Pre-Commissioning & Hook-up in Project completion phase
• Prepare Jobcard for E&I Hook-up, including readiness of materials & manpower arrangement

GlobalTech System Engineering PTE LTD
Industry: Oil & Gas EPC for System Engineering (Package)
Designation: Project Engineer
Project: - Banyu Urip Project - Nitogen Air Compressor Package
Client: Samsung Engineering Co. Ltd,
End-User: Mobil Cepu Limited
- Sagar Samrat Conversion Project - Chemical Injection Package
Client: Mercator Limited India
End-User: ONGC India

GlobalTech system Engineering PTE LTD is a Singapore Company which based in Singapore that applies ISO 9001:2000 company provides engineering consultancy, services, project management and supply of custom built system equipment for the Oil & Gas, Petrochemical, Refinery, Power Generation and Marine Industries.
Overall duties description: - Project management & Engineering
- To prepare master list, plan, make schedule, & cost control of the handled project
- To lead project team (designer, engineer, contractor, supplier, site supervisor) & to ensure it is on schedule.
- To liaise with client as focal point on technical & commercial issues.
- To monitor engineering, procurement, fabrication & testing status.
- To prepare equipment & instrument datasheet and submit to client
- To check engineering drawing (Piping & Instrument Diagram (P&ID), General Arrangement, detail drawing) & other documents and submit to client
- To sourcing & procure (make inquiry & P.O, review quotation, negotiate with supplier, contractor, forwarder) for equipments, instruments, raw material, fittings, valves etc., according to requirement from client.
• Site supervision during fabrication •Monitor Fabrication at Subcontractor site
• Verify and confirm the availability of drawings and materials, to plan the efficient execution of the works performed by subcontractors or by assigned direct hiring personnel
• Assist subcontractors or personnel for the correct interpretation of the drawings, providing support in the solution of technical problems
• Supervise the execution of mechanical, electrical & instrument works, checking that machineries/tools are properly used and maintained •Supervise the execution of mechanical, electrical & instrument completion activities, making sure that all punch list items in scope are closed
• Verify that works are correctly carried out in accordance with the project specifications, highlighting any engineering problems encountered in the field
• Organize working area based on assigned activities to improve HSE and overall efficiency

December 3, 2010-July 20, 2012
PT. DSS Engineering Services
Industry: Marine/Oil & Gas Contractor
Designation: Project Engineer
Project: Storage Tank & Piping, Carbon steel & Stainless steel
Responsible: • Review technical drawing, specs, procedures and scope of job
• Prepare project quoting
• Maintain and Follow-up Project Documents from start until Project accomplishment
• Arrange welder test with main-cont and third party inspection
• Prepare job progress report
• Monitoring material availability, tools and consumable.
• Invoicing.
• Plan Project by effectively managing cost, schedule & issues
• Co-ordinate with client and main-cont to ensure there is a minimal or no disruption to facilities operation works.
• Co-ordinate Job Safety Analysis, Work Method Statement and Permit to Work application requirements as per procedures.
• Delegate other related duties and assignments as required to sub-ordinate
• Review and interpret procedures to sub-ordinate
• Prepare Report format compliance to the client requirement
• Check Progress report, data recording with actual progress in the field
• Monitor the Project running
• Safe and efficient delivery of Projects to both Client and Company satisfaction.
• Input to both technical and commercial aspects of the tendering process

March 8, 2010-November 19, 2010
PT. Angkur Mulia Engineering
Industry: Marine/Oil & Gas Contractor
Designation: Project Engineer
Responsible: • Review technical drawing, specs, procedures and scope of job
• Prepare project quoting
• Maintain and Follow-up Project Documents from start until Project accomplishment
• Arrange welder test with main-cont and third party inspection
• Prepare job progress report and submit to main-cont QC and client
• Monitoring material availability, tools and consumable.
• Invoicing.
• Plan Project by effectively managing cost, schedule & issues
• Co-ordinate with client and main-cont to ensure there is a minimal or no disruption to facilities operation works.
• Co-ordinate Job Safety Analysis, Work Method Statement and Permit to Work application requirements as per procedures.
• Delegate other related duties and assignments as required to sub-ordinate
• Review and interpret procedures to sub-ordinate
• Prepare Report format compliance to the client requirement
• Check Progress report, data recording with actual progress in the field
• Monitor the Project running
• Safe and efficient delivery of Projects to both Client and Company satisfaction.
• Input to both technical and commercial aspects of the tendering process

June 2, 2008-February 12, 2010
PT. Maju Sejahtera Pratama
Industry: Marine/Oil & Gas Contractor
Designation: Project Coordinator
Project: Reel Drum Repair (skid replace and Re-Blasting/Painting),
OYO FPSO (deck skid fabrication and Blasting/Painting),
MODEC Pressure Vessel, Skid and Piping Fabrication and
Blasting/Painting,
Iron Rack & Lifting Basket Fabrication and Blasting/Painting
Client: Conoco Philip, Bumi Armada Malaysia, MODEC, Halliburton
Main-Cont: PT. Technics Offshore Jaya
Responsible: • Review technical drawing, specs, procedures and scope of job
• Prepare project quoting
• Arrange welder test with main-cont and third party inspection
• Prepare job progress report and submit to main-cont QC and client
• Monitoring material availability, tools and consumable.
• Invoicing.
• Plan Project by effectively managing cost, schedule & issues
• Estimate number of manpower, tool & consumable, and project schedule
• Co-ordinate with client and main-cont to ensure there is a minimal or no disruption to facilities operation works.
• Co-ordinate Job Safety Analysis, Work Method Statement and Permit to Work application requirements as per procedures.
• Delegate other related duties and assignments as required to sub-ordinate
• Review and interpret procedures to sub-ordinate
• Prepare Report format compliance to the client requirement
• Check Progress report, data recording with actual progress in the field
• Monitor the Project running
• Safe and efficient delivery of Projects to both Client and Company satisfaction.
• Input to both technical and commercial aspects of the tendering process

November 5, 2007-May 16, 2008
PT. Kharisma Ikrarindo
Industry: Marine/Oil & Gas Contractor
Designation: Project Coordinator
Project: Apache Ningaloo (Pipe spools and Skid Fabrication)
Client: Prosafe
Main Cont: PT. Profab Indonesia

Responsible: • Review technical drawing, specs, procedures and scope of job
• Estimate number of manpower, tool & consumable, based on scope of job and project schedule.
• Prepare project quoting
• Arrange welder test with main-cont and third party inspection
• Prepare job progress report and submit to main-cont QC and client
• Monitoring material availability, tools and consumable.
• Invoicing.
• Plan Project by effectively managing cost, schedule & issues
• Co-ordinate with client and main-cont to ensure there is a minimal or no disruption to facilities operation works.
• Co-ordinate Job Safety Analysis, Work Method Statement and Permit to Work application requirements as per procedures.
• Delegate other related duties and assignments as required to sub-ordinate
• Review and interpret procedures to sub-ordinate
• Prepare Report format compliance to the client requirement
• Check Progress report, data recording with actual progress in the field
• Monitor the Project running
• Safe and efficient delivery of Projects to both Client and Company satisfaction.
• Input to both technical and commercial aspects of the tendering process

August 24, 2005-October 6, 2007
PT. Dunia Anugrah Teknik
Industry: Marine/Oil & Gas Contractor
Designation: Project Engineer
Project: BOHAI (Jacket Leg lifting lug fabrication)
Client: Conoco Philip
Main-Cont: PT. SMOE Indonesia
Responsible: • Review technical drawing, specs, procedures and scope of job
• Estimate number of manpower, tool & consumable, based on scope of job and project schedule.
• Prepare project quoting
• Arrange welder test with main-cont and third party inspection
• Prepare job progress report and submit to main-cont QC and client
• Monitoring material availability, tools and consumable.
• Invoicing.
• Execute projects by effectively managing cost, schedule & issues.
• Purchase materials & services to ensure project is completed safely & meets the project objective.
• Co-ordinate with various departments to ensure there is a minimal or no disruption to facilities operation works.
• Follow the company management system & maintain good project documentation.
• Co-ordinate Job Safety Analysis, Work Method Statement and Permit to Work application requirements as per procedures.
• Perform other related duties and assignments as required
• Safe and efficient delivery of Projects to both Client and Company satisfaction.
• Input to both technical and commercial aspects of the tendering process.

February 2003-August 2005
PT. Plexus Manufacturing Indonesia
Designation: Test Engineer

January 2002-February 2003
PT. Solectron Technology Indonesia
Designation: Test Engineer

October 2000-October 2001
Flairis Advanced Manufacturing Pte Ltd Singapore
Designation: Test EA

May 1998-October 2000
PT. Natsteel Electronics Batam
Designation: Test Engineer

Jobs Responsible (Electronics): • Report to Test Engineering Manager
• Lead group of debug technicians for ICT&FCT
• Set-up FCT equipment
• Carry out Failure Analysis on PCBA level and components
• Failure Analysis on new product, current product and Customer Return
• Carry out complete test evaluation on In-Circuit Testers as well as Functional Testers (ATE) on rejected QA sampling
• Trouble shooting failed PCBA from ICT&FCT tester
• Evaluation of hardware and software problems that arises during production run of the product
• Perform Run-In Test for product reliability test
• Provide debug data for quality improvement
• Failure Analysis the root cause for high fall-out/rejected PCBA in production line for immediately feedback and further decision
• Set-up, Maintenance and Trouble Shooting FCT Debug Station
• Failure Analysis for root cause of problem whether PCBA problem, fixture problem or software problem
• Work with team for Set-up new product, feedback for all new product problem
• Trained to setup maintain and fine-tuning test software on the In-Circuit Testers as well as Functional Testers (ATE)

Product: Video Display card, Sound card, Burn-in test Motherboard
: CD Recorder, Apple "Macintosh" Motherboard, Compaq Motherboard
: Set Top Box, Various Product

SKILL
• AutoCAD
• MS Windows
• MS Office
• Windows NT
• Macintosh OS
• UNIX
• Assembler
• CAD